3M™ PF-5056

A colorless, fully-fluorinated liquid that is chemically & thermally stable, non-flammable & practically non-toxic. It is effective in reducing the thermal conductivity of polyurethane & other rigid foam formulations. Has a boiling point of 25°C - 80°C.

Ideal solvent for depositing or removing fluorinated oils and lubricants along with use as heat transfer fluid in medium temperature ranges. Also used as additive to improve closed-cell micropourous blown foams. A clear, colorless, fully-fluorinated liquid PF-5052 fluid is chemically and thermally stable, practically non-toxic, and nonflammable. Appearance: Clear, colorless Boiling Point (101 kPa): 25°C - 80°C Liquid Density: 1.7 g/ml Kinematic Viscosity: <1 centistokes Water Solubility: < 20 ppmw Solubility in Water: <5 ppmw Thermal stability Chemical stability Wide liquid range Non-conductive Used in combination with hydrocarbon blowing agents such as cyclopentane, reducing the cell size and the thermal conductivity of many rigid foam formulations. Products potentially benefiting from the use of performance fluid PF-5056 include: Appliances Commercial Refrigeration Refrigerators Refrigerated Transport Freezers Building Construction Panels

3M™ PF-5058

A blend of clear, colorless, fullyfluorinated liquids that is chemically and thermally stable, practically non-toxic and nonflammable. Has a boiling point of 80°C - 100°C.

Ideal solvent for depositing or removing fluorinated oils and lubricants along with use as heat transfer fluid in medium temperature ranges. Slower evaporation rate is useful for deep-draw and cold-rolling lubricant formulations. Is a clear, colorless, fully-fluorinated liquid. PF-5052 fluid is chemically and thermally stable, practically non-toxic, and nonflammable. (b.p 80-100C) Appearance: Clear, colorless Boiling Point (101 kPa): 80°C – 100 °C Liquid Density: 1.75 g/ml Kinematic Viscosity: 0.9 centistokes Water Solubility: < 15 ppmw Solubility in Water: <5 ppmw Thermal stability Chemical stability Wide liquid range Non-conductive An effective alternative to chlorofluorocarbons (CFCs) in a wide range of applications, from lubricant deposition to process solvent applications.

Dowcal 100E

Ethylene glycol-based fluid exhibiting lower viscosity and heat transfer performance for HVAC and chemical industry.

Provides excellent heat transfer performance and exceptional thermal stability in well-maintained heat transfer systems. Ethylene glycol-based fluid Density at 20c: 1.114 Ph of solution: 8.0-8.8 Reserve Alkalinity min: 9.5 Freeze point: -36 Offers a low acute oral toxicity, reducing contamination hazards compared to methanol alternatives. HVAC Pharmaceutical Secondary cooling and heating Freeze, burst protection Renewable energy Ground Source Heat Pumps (GSHP)

DOWCAL™ 100

An ethylene glycol-based fluid especially requiring corrosion protection at lower glycol concentrations.

Provides excellent heat transfer performance and exceptional thermal stability in well-maintained heat transfer systems. Ethylene glycol-based fluid Offers a low acute oral toxicity, reducing contamination hazards compared to methanol alternatives. HVAC Pharmaceutical Secondary cooling and heating Freeze, burst protection Renewable energy Ground Source Heat Pumps (GSHP

DOWFROST™

Made with DOW PuraGuard™ Propylene Glycol USP/EP, monopropylene glycol with specially formulated packages of food grade industrial inhibitors that help prevent corrosion.

Regular DOWFROST™ inhibited propylene glycol (PG) DOWFROST™ is comprised of about 96% PG and 4% corrosion inhibitors. All ingredients are food safe, that is to say they are classified as GRAS (generally regarded as safe) by FDA and are approved as direct food additives. DOWFROST™ is the product of choice for the food processing industry. It is undyed and has water white appearance. DOWFROST™ offers effective heat transfer over a slightly narrower temperature range than DOWTHERM™ fluids: from 0 F to 250 F. The higher minimum recommended temperature for PG based fluids is because PG has higher viscosity and is more difficult to pump at low temperature. DOWFROST™ inhibited PG can provide freeze protection down to -60 F. DOWFROST™ is offered in various concentrations and package sizes. Color: Clear Propylene glycol-based fluid Propylene glycol-based fluid (96%) Water white Made with DOW PuraGuard™ Propylene Glycol USP/EP Low toxicity - complies with FDA and USDA regulations Operating range: 0 to 250° F for heat transfer 60° F for burst protection Heating, Ventilation & Air Conditioning (HVAC) Chill water & hydronic heating loops Geothermal (ground source heat pumps) Snow melt & Turf heating systems Solar hot water heating Fire water sprinkler systems Food processing Chilling of dairy products & beverages Beer & wine (fermentation cooling) Freezing of concentrated juices, meats, poultry & fish Refrigeration Ice skating rinks Cold storage, refrigerated warehouses & supermarkets (secondary loop) Thermal Energy Storage (TES)

DOWFROST™ Copper Inhibitor

An azole based inhibitor designed to boost the anti-corrosion properties.

Intended to be added when the inhibitors in heat transfer fluids become depleted or low. To ensure proper protection for your system and to maintain balance of the inhibitor package, Dow offers free sample test kits to test your inhibitor levels. Color: Yellow to amber Odor: Characteristic pH: 13.0 - 13.7 Measured Freezing point: -8 °C ( 18 °F) Literature Boiling point (760 mmHg): 100 °C ( 212 °F) Evaporation Rate (Butyl Acetate = 1): <0.8 Estimated. Vapor Pressure: 23 mmHg at 25 °C (77 °F) Literature Relative Vapor Density (air = 1): Same as water Relative Density (water = 1): 1.19 at 20 °C (68 °F) / 20 °C Literature Water solubility: Soluble in water Partition coefficient: n-octanol/water log Pow: 1.71 Estimated. Anti-corrosion inhibitor Intended to be added when the inhibitors in heat transfer fluids become depleted or low.

DOWFROST™ Geo 20

A 20% propylene glycol solution that is intended for geothermal heat pump systems.

A ready to use solution that contains specially designed corrosion inhibitors that meet ASTM D1384 corrosion protection requirements. The low glycol content provides lower viscosity and higher heat transfer efficiency. This fluid has a freezing point of 18.5°F. Recommended Use Temperature Range: -5ºC (23ºF) to 100ºC (212ºF) Typical Properties of DOWFROST GEO 20 Fluid: Composition (% by volume) Propylene Glycol – 20 Performance Additive + Water – 80 Color – Yellow to Green Specific Gravity – 1.017 - 1.027 25 / 25ºC (77 / 77 º F) pH of Solution – 9.5 - 10.5 Reserve Alkalinity (min.) – 3.5 ml Formulated for geothermal systems Intended for use in Geothermal heating and cooling systems

DOWFROST™ HD

or beverage application.

A formulation of propylene glycol and a specially designed package of industrial corrosion inhibitors. The fluid is dyed fluorescent yellow to aid in leak detection. Not approved by the USDA or FDA for food use, and is not suitable for food...

DOWFROST™ HD inhibited propylene glycol (PG) is comprised of about 94% PG and 6% corrosion inhibitors. The lower PG content in DOWROST™ HD allows for additional corrosion inhibitors including some which are not approved by FDA as direct food additives. These additional components do not compromise toxicity fluid and provide an enhanced level of corrosion protection which is unsurpassed in the industry. DOWFROST™ HD has a fluorescent yellow color and is capable of operating at higher temperatures than regular DOWFROST™: from 0 F to 325 F. DOWFROST™ HD is intended for low toxicity, non-food processing applications and provides freeze protection down to -60 F. Dowfrost™ HD is offered is various concentrations and package sizes. Color: Green / Yellow Propylene glycol-based fluid Propylene glycol-based fluid (94%) Fluorescent yellow Increased concentration of inhibitors Not USDA/FDA approved industrial / commercial version of DOWFROST Operating range: 0 to 325° F for heat transfer -60° F for burst protection Heating, Ventilation & Air Conditioning (HVAC) Chill water & hydronic heating loops Geothermal (ground source heat pumps) Snow melt & Turf heating systems Solar hot water heating Fire water sprinkler systems Refrigeration Ice skating rinks Cold storage, refrigerated warehouses & supermarkets (secondary loop) Thermal Energy Storage (TES)

DOWFROST™ Iron Inhibitor

A phosphate and azole based inhibitor designed to boost the anti-corrosion properties.

Intended to be added when the inhibitors in heat transfer fluids become depleted or low. To ensure proper protection for your system and to maintain balance of the inhibitor package, Dow offers free sample test kits to test your inhibitor levels. Color: Colorless to yellow Odor: Characteristic pH: 10.5 Literature Freezing point: -7 °C ( 19 °F) Estimated. Boiling point (760 mmHg): 108 °C ( 226 °F) Flash point: closed cup No test data available Evaporation Rate (Butyl Acetate= 1): < 0.5 Estimated. Vapor Pressure: 10 mmHg at 25 °C (77 °F) Relative Vapor Density (air = 1): 1 Relative Density (water = 1): 1.48 Water solubility: completely miscible with water Anti-corrosion inhibitor Intended to be added when the inhibitors in heat transfer fluids become depleted or low.

DOWFROST™ pH Booster

A heat transfer inhibitor designed for pH adjustments.

Intended to be added when the inhibitors in heat transfer fluids become depleted or low. To ensure proper protection for your system and to maintain balance of the inhibitor package, Dow offers free sample test kits to test your inhibitor levels. Color: Colorless pH: 12 Freezing point: -29 °C ( -20 °F) Literature Boiling point (760 mmHg): 137.78 °C ( 280.00 °F) L Evaporation Rate (Butyl Acetate= 1): <0.5 Vapor Pressure: 26 mmHg Relative Vapor Density (air = 1): >1 Relative Density (water = 1): 1.45 Water solubility 100 % Kinematic Viscosity: 4.3 cSt at 20 °C (68 °F) Intended to be added when the inhibitors in heat transfer fluids become depleted or low.

DOWTHERM™ 4000

A formulation of ethylene glycol that features one of the highest maximum use temperature of any glycol, operating temperature ranges -60°F to 350°F. The fluid is dyed fluorescent orange to aid in leak detection.

DOWTHERM™ 4000 inhibited ethylene glycol (EG) is comprised of about 92% EG and 8% corrosion inhibitors and has a bright fluorescent orange color. The lower EG content allows for a higher concentration of corrosion inhibitors which in turn means DOWTHERM™ 4000 is capable of operating at higher temperatures than DOWTHERM™ SR1 i.e. from -20°F to 350°F. This makes DOWTHERM™ 4000 a higher end, niche type product which is also capable of providing freeze protection down to -60°F. Ethylene glycol-based fluid (92%) Fluorescent orange Increased concentration of inhibitors Efficient heat transfer Operating range: -20°F to 350°F for heat transfer 60°F for burst protection Wide-temperature range operability Heating, Ventilation & Air Conditioning (HVAC) Chill water & hydronic heating loops Geothermal (ground source heat pumps) Snow melt & Turf heating systems Solar hot water heating Fire water sprinkler systems Refrigeration Ice skating rinks Cold storage, refrigerated warehouses & supermarkets (secondary loop) Thermal Energy Storage (TES)

DOWTHERM™ SR-1

A formulation of ethylene glycol and a specially designed package of industrial corrosion inhibitors with operating temperature ranges of -60°F to 250°F. The fluid is dyed fluorescent pink for leak detection purposes.

DOWTHERM™ SR1 inhibited ethylene glycol (EG) is comprised of about 95% EG and 5% corrosion inhibitors. DOWTHERM™ SR1 is the most popular EG based product within the Dow portfolio. In fact, DOWTHERM™ SR1 is the most widely recognized brand name in the industry. It offers effective heat transfer over a wide temperature range: from -20°F to 250°F and provides freeze protection down to -60°F. Color: Pink Ethylene glycol-based fluid Ethylene glycol-based fluid (95%) Fluorescent pink Efficient heat transfer Operating range: -20°F to 250°F for heat transfer 60°F for burst protection Offered in various package sizes and blends. DOWTHERM™ SR-1 25% DOWTHERM™ SR-1 30% DOWTHERM™ SR-1 35% DOWTHERM™ SR-1 40% DOWTHERM™ SR-1 45% DOWTHERM™ SR-1 50% DOWTHERM™ SR-1 60% Heating, Ventilation & Air Conditioning (HVAC) Chill water & hydronic heating loops Geothermal (ground source heat pumps) Snow melt & Turf heating systems Solar hot water heating Fire water sprinkler systems Refrigeration Ice skating rinks Cold storage, refrigerated warehouses & supermarkets (secondary loop) Thermal Energy Storage (TES)

Fluorinert™ FC-3284

Fluid ideal for use in single phase heat transfer applications in semiconductor manufacturing. Liquid temperature range (-50°C to 128°C).

A non-conductive fluid for use in single and two phase heat transfer fluid applications in these semiconductor manufacturing. Ideal for a variety of applications such power electronics and computer cooling. Appearance: Clear, colorless Average Molecular Weight: 299 Boiling Point (1 atm): 50°C Pour Point: -73°C Latent Heat of Vaporization (at normal boiling point): 105 J/g Liquid Density: 1710 kg/m3 Kinematic Viscosity: 0.42 centistokes Absolute Viscosity: 0.71 centipoise Liquid Specific Heat: 1100 J kg-1 °C-1 Liquid Thermal Conductivity : 0.062 W m-1 °C-1 Coefficient of Expansion: 0.0016 °C-1 Water Solubility: 14 ppmw Solubility in Water: <5 ppmw Ozone Depletion Potential: 0 Dielectric Strength: 40 kV, 0.1" gap Dielectric Constant: 1.86 Thermal stability Chemical stability Wide liquid range Non-conductive Narrow boiling range Non-flammable Residue free Ideal for a variety of applications such as dielectric bath, heat transfer, and power electronic cooling

Fluorinert™ FC-40

Used in nondestructive leak and thermal shock testing for military electronics according to mil spec 883.

A colorless, thermally stable, fully fluorinated liquid. It's wide liquid range (-57°C to 165°C) make it ideal for a wide variety of applications. The FC-40 liquid is primarily a single compound, so its composition will not shift or fractionate over time. This results in less fluid loss and insures that transport properties do not change with time. Appearance: Clear, colorless Average Molecular Weight: 650 Boiling Point (1 atm): 165°C Pour Point: -57°C Latent Heat of Vaporization (at normal boiling point): 69 J/g Liquid Density: 1855 kg/m3 Kinematic Viscosity: 2.2 centistokes Absolute Viscosity: 4.1 centipoise Liquid Specific Heat: 1100 J kg-1 °C-1 Liquid Thermal Conductivity : 0.062 W m-1 °C-1 Coefficient of Expansion: 0.0012 °C-1 Water Solubility: <7 ppmw Solubility in Water: <5 ppmw Ozone Depletion Potential: 0 Dielectric Strength: 46 kV, 0.1" gap Dielectric Constant: 1.9 Compatible with most metals, plastics and elastomers. Non-conductive Narrow boiling range Wide liquid range Thermal stability Chemical stability Ideal for a variety of single phase heat transfer applications in the semiconductor manufacturing industry such as etchers, ion implanters and testers.

Fluorinert™ FC-43

A clear, colorless, non-conductive, non-flammable, residue free, thermally and chemically stable liquid ideal for use in many heat transfer fluid applications.

Is thermally and chemically stable, compatible with sensitive materials, nonflammable, practically nontoxic and leaves essentially no residue upon evaporation. This unique combination of properties makes this product ideal for many electronics applications, including many electronic quality and reliability tests. With boiling point of 174 C, commonly used as for burin-in testing, environmental stress screening and vapor phase soldering. Conforms to Mil Spec 883. Appearance: Clear, colorless Average Molecular Weight: 670 Boiling Point (1 atm): 174°C Pour Point: -50°C Estimated Critical Temperature: 567 K Estimated Critical Pressure: 1.13 x 106 pascals Vapor Pressure: 192 pascals Latent Heat of Vaporization (at normal boiling point): 70 J/g Liquid Density: 1860 kg/m3 Kinematic Viscosity: 2.5 centistokes Absolute Viscosity: 4.7 centipoise Liquid Specific Heat: 1100 J kg-1 °C-1 Liquid Thermal Conductivity: 0.065 W m-1 °C-1 Coefficient of Expansion: 0.0012 °C-1 Refractive Index: 1.291 Water Solubility: 7 ppmw Solubility in Water: <5 ppmw Ozone Depletion Potential: 0 Thermal stability Chemical stability Wide liquid range Non-conductive Narrow boiling range Compatibility Used in heat transfer fluid applications, especially in the electronics and semiconductor industry for testers, CVD and TFT manufacturing.

Fluorinert™ FC-70

A non-conductive, thermally and chemically stable liquid that offers a high boiling point (215°C).

A clear, colorless, fully-fluorinated liquid that is thermally and chemically stable, compatible with sensitive materials, nonflammable, practically nontoxic and leaves essentially no residue upon evaporation. Appearance: Clear, colorless Average Molecular Weight: 820 Boiling Point (1 atm): 215°C Pour Point: -25°C Estimated Critical Temperature: 608 K Estimated Critical Pressure: 1.03 x 106 pascals Vapor Pressure: 15 pascals Latent Heat of Vaporization (at normal boiling point): 69 J/g Liquid Density: 1940 kg/m3 Kinematic Viscosity: 12 centistokes Absolute Viscosity: 24 centipoise Liquid Specific Heat: 1100 J kg-1 °C-1 Liquid Thermal Conductivity: 0.070 W m-1 °C-1 Coefficient of Expansion: 0.0010 °C-1 Surface Tension: 18 dynes/cm Refractive Index: 1.303 Water Solubility: 8 ppmw Solubility in Water: <5 ppmw Ozone Depletion Potential: 0 Thermal stability Chemical stability Wide liquid range Non-conductive Narrow boiling range Compatibility Used for Vapor Phase Soldering of Pb/Sn eutectic solders typical in military applications. Also used in reliability testing per mil spec 883

Fluorinert™ FC-770

A wide temperature wide (-125°C - 95°C) fluid that is used in many low temperature heat transfer applications.

Heat transfer fluid with key properties including Inertness, high dielectric strength and electrical resistivity. Typically used in single or dual-phase direct contact systems in electronics. Applications include, high voltage transformers, power electronics, dry etchers, CVD machines and cooling Ion implanters. Appearance: Clear, colorless Average Molecular Weight: 339 Boiling Point (1 atm): 95°C Pour Point: -127°C Calculated Critical Temperature: 511 K Latent Heat of Vaporization (at normal boiling point): 85.9 J/g Liquid Density: 1793 kg/m3 Kinematic Viscosity: 0.79 centistokes Absolute Viscosity: 1.359 centipoise Coefficient of Expansion: 0.00148 °C-1 Surface Tension: 10 dynes/cm Refractive Index: 1.27 Water Solubility: 14 ppmw Solubility in Water: 1.3 ppmw Thermal stability Chemical stability Wide liquid range Non-conductive Narrow boiling range Compatibility Cooling ion implanters, dry etchers and CVD machines Thermal shock and test equipment Direct contact single and two-phase coolant in certain supercomputers and sensitive military electronics

Krytox™ 143AC Oil

Krytox™ 143AC Oil has a viscosity of 243 cSt @ 40°C.

Krytox™ aerospace lubricants were created by Chemours to withstand the rigors of orbital flights in the vacuum of space. 143AC Oil has a viscosity of 243 cSt @ 40 degrees C. Average MW: 5940 Viscosity @40C: 243 Viscosity Index: 134 Pour Point °C: -35 Density @0°C (32°F): 1.95 Vapor Pressure (torr) @38°C (100°F): 8 x 10(–8) Estimated Useful Range °C: –34–288

Krytox™ 143AD Oil

Krytox™ 143AD Oil has a viscosity of 450 cSt @ 40°C.

Krytox™ aerospace lubricants were created by Chemours to withstand the rigors of orbital flights in the vacuum of space. 143AD Oil has a viscosity of 450 cSt @ 40 degrees C. Average MW: 7480 Viscosity @40C: 450 Viscosity Index: 146 Pour Point °C: -35 Density @0°C (32°F): 1.95 Vapor Pressure (torr) @38°C (100°F): 6 x 10(–9) Estimated Useful Range °C: –29–316

Krytox™ 143AZ Oil

Krytox™ 143AZ Oil has a viscosity of 22.8 cSt @ 40°C.

Krytox™ aerospace lubricants were created by Chemours to withstand the rigors of orbital flights in the vacuum of space. 143AZ Oil has a viscosity of 22.8 cSt @ 40 degrees C. Average MW: 2060 Viscosity @40C: 22.8 Viscosity Index: 60 Pour Point °C: -55 Density @0°C (32°F): 1.91 Vapor Pressure (torr) @38°C (100°F): 4 x 10(–4) Estimated Useful Range °C: –57–149

Krytox™ 4442 Oil

Krytox™ 4442 Oil has been blended for use in colder ambient conditions.

Krytox™ 4442 Oil has been blended for use in cold to warm ambient conditions. If the application is to be run continuously at high temperatures, the use of standard Krytox™ GPL100 Series of Oils is recommended. This oil has a viscosity of 50 cSt @40°C Performs well in colder temperature applications.

Krytox™ EG 2000 Grease

form. Krytox™ EG 2000 Grease has a viscosity of 270 cSt @38°C.

Krytox™ EG 2000 Grease is a white buttery grease formulated specifically for Electronic Grade applications. Krytox™ EG 2000 Grease has all of the same properties as the 143 series base oil that they are made from, but in grease...

Krytox™ EG 2000 Grease lubricants for use in clean rooms require base oils that have been specially distilled to remove the more volatile, lighter molecules that might evaporate easily. In addition, the use of special thickeners that do not contain metals, reactive compounds, or large particles is also necessary to meet some clean room standards. NLGI Grade: - 2 Color: - White Base Oil Viscosity cSt @38°C: 270 Vapor Pressure of base oil @38°C: 8 x 10–8 Pour Point °C: -35°C: Oil Separation at 99°C (210°F): - 3% Grease Density, g/ml @25°C: 1.93 Operating Temperature Range, °C: -34 to 288 Krytox™ EG 2000 Grease lubricants have higher molecular weight and low vapor pressure. Krytox™ EG 2000 Grease have good radiation resistance, but typically are not good lower temperature lubricants. Krytox™ EG 2000 Grease offer wide temperature range capability, chemical inertness, and compatibility with almost all seals and plastic materials.

Krytox™ EG 3000 Grease

grease form. Krytox™ EG 3000 Grease has a viscosity of 500 cSt @38°C.

Krytox™ EG 3000 Grease is a white buttery grease formulated specifically for Electronic Grade applications. Krytox™ EG 3000 Grease has all of the same properties as the 143 series base oil that they are made from, but in...

Krytox™ EG 3000 Grease lubricants for use in clean rooms require base oils that have been specially distilled to remove the more volatile, lighter molecules that might evaporate easily. In addition, the use of special thickeners that do not contain metals, reactive compounds, or large particles is also necessary to meet certain specific clean room standards. NLGI Grade: - 2 Color: - White Base Oil Viscosity cSt @38°C: 500 Vapor Pressure of base oil @38°C: 6 x 10–9 Pour Point °C: -30°C: Oil Separation at 99°C (210°F): 3% Grease Density, g/ml @25°C: 1.93 Operating Temperature Range, °C: -29 to 316 Krytox™ EG 3000 Grease lubricants have higher molecular weight and low vapor pressure. Krytox™ EG 3000 Grease have good radiation resistance, but typically are not good lower temperature lubricants. Krytox™ EG 3000 Grease offer wide temperature range capability, chemical inertness, and compatibility with almost all seals and plastic materials.

Krytox™ GPL102 Oil

Krytox™ GPL102 Oil is a clear, colorless, fluorinated synthetic oil. Useful Operating Range: -63°C to 132°C.

Krytox™ GPL102 Oil is a clear, colorless, fluorinated synthetic oil. Krytox™ GPL102 has a viscosity of 15 cSt @40°C. This grease is suitable to use in applications up to 132°C. ISO Grade: 15 Estimated Useful Range: -63°C to 132°C Oil Viscosity @40°C: 15 Oil Viscosity Index: 29 Oil Pour Point: -63°C Oil Density, g/ml @0°C: 1.91 Maximum Oil Volatility, % in 22 hr @121°C: 35 Oil Separation, wt loss, % in 30 hr @99°C: 7% Food Grade Compatible (H1): No Krytox™ GPL102 Oil is nonreactive, nonflammable, safe in chemical and oxygen service, and long-lasting.

Krytox™ GPL104 Oil

Krytox™ GPL104 Oil is a clear, colorless, fluorinated synthetic oil. Useful Operating Range: -51°C to 179°C.

Krytox™ GPL104 Oil is a clear, colorless, fluorinated synthetic oil. Krytox™ GPL104 has a viscosity of 60 cSt @40°C. This grease is suitable to use in applications up to 179°C. ISO Grade: 68 Estimated Useful Range: -51°C to 179°C Oil Viscosity @40°C: 60 Oil Viscosity Index: 111 Oil Density, g/ml @0°C: 1.93 Oil Pour Point: -51°C Maximum Oil Volatility, % in 22 hr @121°C: 3 Oil Separation, wt loss, % in 30 hr @99°C: 5% Food Grade Compatible (H1): No Krytox™ GPL104 Oil is nonreactive, nonflammable, safe in chemical and oxygen service, and long-lasting.

Krytox™ GPL106 Oil

Krytox™ GPL106 Oil is a clear, colorless, fluorinated synthetic oil. Useful Operating Range: -36°C to 260°C.

Krytox™ GPL106 Oil is a clear, colorless, fluorinated synthetic oil. Krytox™ GPL106 has a viscosity of 243 cSt @40°C. This grease is suitable to use in applications up to 260°C. ISO Grade: 220 Estimated Useful Range: -36°C to 260°C Oil Viscosity @40°C: 243 Oil Viscosity Index: 134 Oil Pour Point: -36°C Oil Density, g/ml @0°C: 1.95 Maximum Oil Volatility, % in 22 hr @121°C: 1 Oil Separation, wt loss, % in 30 hr @99°C: 4% Food Grade Compatible (H1): No Krytox™ GPL106 Oil is nonreactive, nonflammable, safe in chemical and oxygen service, and long-lasting.

Krytox™ GPL107 Oil

Krytox™ GPL107 Oil is a clear, colorless, fluorinated synthetic oil. Useful Operating Range: -30°C to 288°C.

Krytox™ GPL107 Oil is a clear, colorless, fluorinated synthetic oil. Krytox™ GPL107 has a viscosity of 450 cSt @ 40° C. This grease is suitable to use in applications up to 550° F. ISO Grade: 460 Estimated Useful Range: -30°C to 288°C Oil Viscosity @40°C: 450 Oil Viscosity Index: 145 Oil Pour Point: -30°C Oil Density, g/ml @0°C: 1.95 Maximum Oil Volatility, % in 22 hr @121°C: 0.01 Oil Separation, wt loss, % in 30 hr @99°C: 4% Food Grade Compatible (H1): No Krytox™ GPL107 Oil is nonreactive, nonflammable, safe in chemical and oxygen service, and long-lasting.

Krytox™ GPL255 Grease

Krytox™ GPL255 grease is a special product with fluorescing agent.

Krytox™ GPL255 grease is a special product with fluorescing agent in it to allow the use of a black light to determine the uniformity of an application. It is not intended for routine application as lubricants without qualification testing. The fluorescing additive is present at low levels, but its effect on lubrication performance has not been tested. Base Oil Viscosity, cSt 20 °C (68 °F) = 550 40 °C (104 °F) = 160 100 °C (212 °F) = 18 NLGI Grade 2 Appearance - White and buttery Allows the use of a black light to determine the uniformity of an application. Use black like to uncover surface areas where grease coverage is absent. For applications requiring 100% surface coverage or for applications with surface areas intentionally excluded from being covered by grease. Under ultraviolet light, the products give off a yellowish green color that is visible to the unaided eye. The only equipment necessary is a standard broad spectrum ultraviolet lamp, commonly known as a “black light.” Lamps that emit long wave ultraviolet light in the 365 nm range are available from almost any industrial supply company.

Krytox™ XP-1A1 Oil

Krytox™ XP-1A1 Oil products, formulated with soluble additives, are high-quality, ultra high performance, anti-friction and anti-rust lubricants. Krytox™ XP-1A1 Oil for extreme pressure performance has viscosity of 8 cSt @40°C.

Krytox™ XP-1A1 Oil products are formulated using patented soluble additives. In the past, there were no additives available for the oil, because of the inertness of the oil and insolubility of available additives. The soluble additive won’t be washed away. These patented additives enhance the performance of Krytox™ PFPE greases and oils, giving them improved performance properties. Krytox™ XP-1A1 Oil products will hold up under tremendous load conditions, preventing metal-to-metal contact and thereby reducing wear. The long-term anti-rust properties repel moisture, providing extra protection against corrosion of metal parts and bearing surfaces. ISO Grade of Base Oil: 7 Estimated Useful Temperature Range, °C: –70 to 104 Base Oil Viscosity cSt @40°C: 8 Oil Viscosity Index: N/A Pour Point °C: -70°C Food Contact Approval: None Krytox™ XP-1A1 oil will extend bearing and component life. The anti-corrosion protection of the additive will reduce rusting, and allow longer grease and bearing life. The extreme pressure additive protect bearings under high loads. Bearings run quieter and wear less, because there are no solid additives to make noise. This product also demonstrates excellent resistance to water washout when used in wet environments. While Krytox™ XP-1A1 oils are inert and non-reactive to all elastomers, plastics, and metals, the soluble additives in Krytox™ lubricant XP products have not been tested with all materials. When in doubt, please contact your sales representative.

Krytox™ XP-1A3 Oil

Krytox™ XP-1A3 Oil products, formulated with soluble additives, are high-quality, ultra high performance, anti-friction and anti-rust lubricants. Krytox™ XP-1A3 Oil for extreme pressure performance has viscosity of 30 cSt @40°C.

Krytox™ XP-1A3 Oil products are formulated using patented soluble additives. In the past, there were no additives available for the oil, because of the inertness of the oil and insolubility of available additives. The soluble additive won’t be washed away. These patented additives enhance the performance of Krytox™ PFPE greases and oils, giving them improved performance properties. Krytox™ XP-1A3 Oil products will hold up under tremendous load conditions, preventing metal-to-metal contact and thereby reducing wear. The long-term anti-rust properties repel moisture, providing extra protection against corrosion of metal parts and bearing surfaces. ISO Grade of Base Oil: 32 Estimated Useful Temperature Range, °C: –60 to 154 Base Oil Viscosity cSt @40°C: 30 Oil Viscosity Index: 121 Pour Point °C: -60°C Food Contact Approval: None Krytox™ XP-1A3 oil will extend bearing and component life. The anti-corrosion protection of the additive will reduce rusting, and allow longer grease and bearing life. The extreme pressure additive protect bearings under high loads. Bearings run quieter and wear less, because there are no solid additives to make noise. This product also demonstrates excellent resistance to water washout when used in wet environments. While Krytox™ XP-1A3 oils are inert and non-reactive to all elastomers, plastics, and metals, the soluble additives in Krytox™ lubricant XP products have not been tested with all materials. When in doubt, please contact your sales representative.

Krytox™ XP-1A4 Oil

Krytox™ XP-1A4 Oil products, formulated with soluble additives, are high-quality, ultra high performance, anti-friction and anti-rust lubricants. Krytox™ XP-1A4 Oil for extreme pressure performance has viscosity of 60 cSt @40°C.

Krytox™ XP-1A4 Oil products are formulated using patented soluble additives. In the past, there were no additives available for the oil, because of the inertness of the oil and insolubility of available additives. The soluble additive won’t be washed away. These patented additives enhance the performance of Krytox™ PFPE greases and oils, giving them improved performance properties. Krytox™ XP-1A4 Oil products will hold up under tremendous load conditions, preventing metal-to-metal contact and thereby reducing wear. The long-term anti-rust properties repel moisture, providing extra protection against corrosion of metal parts and bearing surfaces. ISO Grade of Base Oil: 68 Estimated Useful Temperature Range, °C: –51 to 179 Base Oil Viscosity cSt @40°C: 60 Oil Viscosity Index: 124 Pour Point °C: -36°C Food Contact Approval: None Krytox™ XP-1A4 oil will extend bearing and component life. The anti-corrosion protection of the additive will reduce rusting, and allow longer grease and bearing life. The extreme pressure additive protect bearings under high loads. Bearings run quieter and wear less, because there are no solid additives to make noise. This product also demonstrates excellent resistance to water washout when used in wet environments. While Krytox™ XP-1A4 oils are inert and non-reactive to all elastomers, plastics, and metals, the soluble additives in Krytox™ lubricant XP products have not been tested with all materials. When in doubt, please contact your sales representative.

Krytox™ XP-1A6 Oil

Krytox™ XP-1A6 Oil products, formulated with soluble additives, are high-quality, ultra high performance, anti-friction and anti-rust lubricants. Krytox™ XP-1A6 Oil for extreme pressure performance has viscosity of 240 cSt @40°C.

Krytox™ XP-1A6 Oil products are formulated using patented soluble additives. In the past, there were no additives available for the oil, because of the inertness of the oil and insolubility of available additives. The soluble additive won’t be washed away. These patented additives enhance the performance of Krytox™ PFPE greases and oils, giving them improved performance properties. Krytox™ XP-1A6 Oil products will hold up under tremendous load conditions, preventing metal-to-metal contact and thereby reducing wear. The long-term anti-rust properties repel moisture, providing extra protection against corrosion of metal parts and bearing surfaces. ISO Grade of Base Oil: 220 Estimated Useful Temperature Range, °C: –36 to 182 Base Oil Viscosity cSt @40°C: 240 Oil Viscosity Index: 134 Pour Point °C: -36°C Food Contact Approval: None Krytox™ XP-1A6 oil will extend bearing and component life. The anti-corrosion protection of the additive will reduce rusting, and allow longer grease and bearing life. The extreme pressure additive protect bearings under high loads. Bearings run quieter and wear less, because there are no solid additives to make noise. This product also demonstrates excellent resistance to water washout when used in wet environments. While Krytox™ XP-1A6 oils are inert and non-reactive to all elastomers, plastics, and metals, the soluble additives in Krytox™ lubricant XP products have not been tested with all materials. When in doubt, please contact your sales representative.

Krytox™ XP-1A7 Oil

Krytox™ XP-1A7 Oil products, formulated with soluble additives, are high-quality, ultra high performance, anti-friction and anti-rust lubricants. Krytox™ XP-1A7 Oil for extreme pressure performance has viscosity of 440 cSt @40°C.

Krytox™ XP-1A7 Oil products are formulated using patented soluble additives. In the past, there were no additives available for the oil, because of the inertness of the oil and insolubility of available additives. The soluble additive won’t be washed away. These patented additives enhance the performance of Krytox™ PFPE greases and oils, giving them improved performance properties. Krytox™ XP-1A7 Oil products will hold up under tremendous load conditions, preventing metal-to-metal contact and thereby reducing wear. The long-term anti-rust properties repel moisture, providing extra protection against corrosion of metal parts and bearing surfaces. ISO Grade of Base Oil: 460 Estimated Useful Temperature Range, °C: –30 to 182 Base Oil Viscosity cSt @40°C: 440 Oil Viscosity Index: 155 Pour Point °C: -30°C Food Contact Approval: None Krytox™ XP-1A7 oil will extend bearing and component life. The anti-corrosion protection of the additive will reduce rusting, and allow longer grease and bearing life. The extreme pressure additive protect bearings under high loads. Bearings run quieter and wear less, because there are no solid additives to make noise. This product also demonstrates excellent resistance to water washout when used in wet environments. While Krytox™ XP-1A7 oils are inert and non-reactive to all elastomers, plastics, and metals, the soluble additives in Krytox™ lubricant XP products have not been tested with all materials. When in doubt, please contact your sales representative.

Molykote™ 33 Extreme Low Temp, Bearing Grease, Light

NLGI Grade 1 silicone based grease with a lithium thickener offering performance in extremely low temperatures and commonly used in freezer or cold room components.

This light consistency grease has superior performance in extremely low temperatures and is widely used in applications that will be exposed to cold temperatures. Along with its resistance to moisture, corrosiveness, and oxidation, Molykote™ 33 Extreme Low Temperature Bearing Grease is ideal for equipment that must perform well in cold rooms and/or freezers. Product Type: Grease Chemistry: Silicone Base Oil Viscosity: 76 @ 40°C NLGI Grade: 1 Thickener: Lithium High Temp: 204°C Low Temp: -73°C Color: Off white Hazmat: No Performs in extremely low temperatures (-73°C to 180°C) Suitable for many plastics and elastomers Inert Light consistency Good shear Cold room/freezer equipment - Conveyors - Cart casters Plastic motors Meter readers

Molykote™ 33 Extreme Low Temp, Bearing Grease, Medium

NLGI 2 silicone based grease that is the same as Molykote™ 33 Extreme Low Temperature Bearing Grease, Light except that it is medium consistency.

Medium consistency grease with excellent low temperature performance (-73°C to 180°C). Resistant to corrosion, moisture, and oxidation this grease is ideal for use in cold rooms, optical equipment, and other bearing applications. Product Type: Grease Chemistry: Silicone Base Oil Viscosity: 76 @ 40°C NLGI Grade: 2 Thickener: Lithium High Temp: 204°C Low Temp: -73°C Color: Off white Hazmat: No Performs in extremely low temperatures (-73°C to 180°C) Suitable for many plastics and elastomers Inert Light consistency Good shear Cold room/freezer equipment - Conveyors - Cart casters Optical equipment Low-torque instruments Plastic motors

Never-Seez® White Food Grade with PTFE - NSWT-14, NSWT-1C, NSWT-120

A premium quality anti-seize and lubricating compound composed entirely of ingredients which meet FDA requirements where incidental food contact is possible.

Never-Seez® White Food Grade with PTFE is a premium quality lubricant composed entirely of ingredients which meet FDA requirements where incidental food contact is possible. It has been approved by the U.S. Department of Agriculture for use in establishments operating under the Federal Meat and Poultry Products Inspection Program. The unique dispersion of FDA authorized PTFE provides additional lubricity especially where a thin film of lubricant is desirable. Never-Seez White Food Grade with PTFE is virtually odorless, colorless, and tasteless. It is a "multi-purpose" lubricant for varied services within a food handling plant. Color: White Temperature Range: -5°F to 475°F (-21°C to 246°C) Thickener Type: Aluminum Complex Particle Size, mil (microns): 2.0 max. (50 μ) Density, (g/cm3): 0.91 to 1.03 Flash Point, °F (°C): 430°F (221°C) Copper Corrosion Test @ 212°F (100°C): 24 hrs. 1b Worked Penetration (60 strokes @ 77°F (25°C): 255-295 NGLI Grade: 2 Dropping Point, (minimum) °F (°C): >450°F (232°C) Torque Coefficient, k factor: 0.13 Water Washout, % loss: @ 175°F (79°C): <5 Bearing Rust Test: Pass Timken OK Load, lb.: 40 Four Ball EP: Load Wear Index: 43.7 Last non-seizure load (scar): 63 kgf (0.36 mm) Last seizure load (scar): 250 kgf (2.42 mm) Weld Load: 315 kgf Provides maximum lubrication up to 475°F Keeps parts working longer with less wear Prevents rust and corrosion Resists water and chemical washout Non-staining Provides a seal against entrance of liquids in bearings Suitable for pipe threads used with potable water— will not impart an odor or taste Certified NSF H-1 Available in the following package sizes: • NSWT-14 (14 oz. flat top can) • NSWT-1C (14.1 oz. cartridge) • NSWT-120 (120 lb. drum) Nuts, bolts, screws Pipe fittings Stainless steel fittings Valve stems and assemblies Pump gears Chain drives Gaskets Press fit assemblies Conveyor and oven bearings Packaging machinery Worm gears Slow speed or highly loaded bearings <500 RPM

Novec™ 7700

A non-flammable fluid with a low global warming potential for use in heat transfer applications.

Designed for heat transfer applications for use in cooling of ion implanters, CVD machines or other electronic applications. Also is non-flammable fluid with a very low global warming potential (GWP.) This product's excellent inert and dielectric properties make it a viable replacement for higher GWP fluids such as PFCs and PFPEs in a wide variety of applications like microemulsion formulations and slow-evaporation coating diluent. Boiling Point @ 1 atm: 167°C (333°F) Pour Point: -50°C (-58°F) Molecular Weight: 528 Liquid Density: 1797 kg/m3 Coefficient of Expansion: 0.00111 K-1 Latent Heat of Vaporization @ 1 atm: 83.4 kJ/kg Vapor Pressure: <0.1 kPa Surface Tension: 18 dynes/cm Viscosity: 2.5 cSt Critical Temperature: 290°C (554°F) Critical Pressure: 1.41 MPa Solubility of Fluid in Water: <1 ppb by weight Dielectric Strength: 35 kV, 0.1" gap Volume Resistivity: 5 × 1011 ohm-cm Dielectric Constant: 6.7 Flammability: Nonflammable GWP: 420 Ozone Depletion Potential: 0.0 Global Warming Potential: 420 Atmospheric Lifetime (years): 5.6 Volatile Organic Compound (VOC): No Wide range of thermal management applications Wide liquid range Non-flammable Non-conductive Compatible with plastics Low toxicity Low Global Warming Potential (GWP) Cooling of Ion implanters, dry etchers and CVD machines in semiconductor and flat panel display manufacturing facilities Cool semiconductor thermal shock and test equipment Direct contact cooling of supercomputers and sensitive milatry electronics Cooling of high voltages transformers and power electronics Freeze drying and reactor cooling in pharmaceutical and chemical manufacturing processes

SYLTHERM™ 800

A polydimethylsiloxane liquid with operating temperature ranges of -40°F to 750°F (-40°C to 400°C).

Highly stable, long-lasting silicone fluid designed for high temperature liquid phase operations. Temperature: -40 to 750 °F (-40°C to 400°C) Vapor Pressure: 197.32 (91.84°C) Specific Heat: 0.360 °F (-17.57°C) Viscosity: 51.0 Density: 61.9 Freezing Point: < -40 °F (-40°C) Flash Point: 320 °F (160°C) Autoignition: 725 °F (385°C) Fluid life > 10 years at 400 °C Low toxicity No odor Non-fouling Very low in acute oral toxicity Used in NDC, Lube Oil Recycling, Heat Recovery, Polymer Processing, Carbon Fiber

SYLTHERM™ HF

A polydimethylsiloxane liquid used from -40°C to 260°C.

Specially formulated, high performance silicone polymer designed for use as a low temperature, liquid phase heat transfer medium. Temperature: -100 to 500 °F (-73.3°C to 260°C) Vapor Pressure: 39.6 Specific Heat: 0.347 °F (-17.5°C) Viscosity: 16.65 Density: 60.31 Freezing Point: <-115 °F (-81.6°C) Flash Point: 145 °F (62.7°C) Autoignition: 671 °F (355°C) Non-toxic with regard to acute oral ingestion Has a closed cup flash point > 62 °C Electrical classifications Used in pharmaceutical applications, Single fluid heating and cooling, Environmental test chambers

SYLTHERM™ XLT

A polydimethylsiloxane liquid used from -100°C to 260 °C

Specifically formulated, high performance silicone polymer designed for use as a low temperature, liquid phase heat transfer medium. It offers remarkable low temperature heat transfer and pumpability, plus thermal stability. Temperature: -100 to 500 °F (-73.3°C) Vapor Pressure: 75.46 Specific Heat: 0.078 °F (-17.7°C) Viscosity: 90.17 Density: 59.3 Freezing Point: -158 °F (-105.5°C) Flash Point: 116 °F (46.6°C) Autoignition: 662 °F (350°C) Non toxic with regard to acute oral ingestion Physical properties allow it to be used in place of chlorinated solvents as a secondary coolant Used in pharmaceutical applications, Single fluid heating and cooling, Environmental test chambers

UCARTHERM™ HTF PM 6141

A formulation of ethylene glycol and specifically designed inhibitor packages with operating temperature ranges of -60°F to 250°F.

Manufactured with 100% virgin ethylene glycol and specifically formulated with heavy-duty industrial inhibitor packages that prevent corrosion, these fluids are widely used for closed-loop, process heating and process cooling. The inhibitors are easily maintained, long lasting and replenishable, which means intervals between fluid change-outs are extended and fluid expense is minimized. Ethylene glycol-based fluid Wide temperature range operability HVAC; Oil & Gas; Immersion freezing; Process cooling; Process heating; Solar heating; Radiant Heating; Thermal Energy Storage; Geothermal; Snow Melt Systems; Fermentation Cooling

UCON™ 50-HB-280-XY23

UCON™ lubricant LB-650-XY23 is a water insoluble butanol-propylene oxide polymer based product specially formulated with additives for iron and copper corrosion protection and high temperature use.

UCON™ Lubricant LB-650-XY23 is readily biodegradable, water-soluble, and exhibits low volatility. Designed for processes that require corrosion protection for copper and iron materials and in processes that require high-temperature stability of the lubricant. Color: Red to brown Odor: Mild Boiling point (760 mmHg): > 200 °C Flash point: closed cup 238 °C Relative Density (water = 1): 1.043 at 20 °C Pour point: < -34 °C Water soluble Low volatility Does not evaporate easily at room temperature Used in processes that require corrosion protection for copper and iron materials and in processes that require high-temperature stability. Intended for use in open bath systems.