ANDEROL® 95 HV-EP

ANDEROL® 95 HV-EP is a technologically advanced grease, which have been developed by complexing modified overbased calcium sulfonates. Viscosity ISO 220.

ANDEROL® 95 HV-EP is a technologically advanced grease, which have been developed by complexing modified overbased calcium sulfonates. ANDEROL® 95 HV-EP technology, developed and patented by Lanxess, is characterized by exceptional mechanical stability, high dropping point, high load carrying performance, reduced wear, and excellent resistance to water and corrosion. ISO 220 Base Oil Exceptional mechanical stability High dropping point High load carrying performance Reduced wear Excellent resistance to water and corrosion. High speed couplings Gear couplings

ANDEROL® Seamer Oil 130

H-1 food machinery lubricant designed specifically for advanced seamer equipment which lubricates the bearings, chains, and gears of an advanced seamer with a recirculating lubrication system.

BladeCote®

Regular use of Bostik® BladeCote® (formerly Bostik® DriCote®) on saw blades, router and drill bits, and knives significantly reduces cutting friction and the buildup of resin or pitch.

Regular use of Bostik® BladeCote® on saw blades, router and drill bits, and knives significantly reduces cutting friction and the buildup of resin or pitch. BladeCote® dries in seconds and will not gum-up, even after several applications. *Formerly known as DriCote® Prevents resin buildup. Reduces blade cleanings. Extends overall life of blades and bits by up to 3 times! More than doubles time between resharpenings. Contains NO silicone or petroleum oil. Will NOT stain wood or interfere with glues or finishes. Reduces cutting friction and heat by 30%. Prolongs equipment life by reducing saw or drill motor drag by up to 25%. Increases productivity by less downtime for saw blade changeovers. Works equally well on steel or carbide, stellite and diamond-tipped cutting blades. Environmentally safer aerosol—NO CFCs and NO ODCs. Bostik DriCote® Meets or Exceeds Federal, State, and Local VOC standards for Voc Content, including EPA, CARB, AQMDs and OTC. Wood Working: - Saw blades - Router bits - Drill bits - Jointers - Planers - Edgers - Screws & nails Other: - Paper cutters & drills - Bindery knives - Shears - Chains - Pulleys - Gears - Sliding glass door tracks

DOWCAL™ 200

A propylene glycol-based fluid capable of operating at higher temperatures than other propylene glycol fluids.

This fluid is low in acute oral toxicity and contains a specially formulated inhibitor package that helps prevent corrosion of materials common in HVAC construction, food and beverage processing, and other systems. Propylene glycol based fluid Improved corrosion protection for aluminum alloys Suitable for use at a minimum 20% concentration for high and low temperatures Long lifetime Low acute oral toxicity Free of nitrite, borax and CMR Available in various package sizes and blends. Suitable applications include: single fluid process heating and cooling; closed-loop, water-based heating and air conditioning systems where propylene glycol-based fluids are preferred or required; and food industry applications within temperature range.

DOWCAL™ 200E

Propylene glycol-based fluid with low acute toxicity as an alternative to ethylene glycol for secondary cooling or heating in construction and industry.

This fluid is low in acute oral toxicity and contains a specially formulated inhibitor package that helps prevent corrosion of materials common in HVAC construction, food and beverage processing, and other systems. Density at 20c: 1.043 Ph of solution: 7.7-8.5 Reserve Alkalinity min: 9.0 Freeze point: -32 Improved corrosion protection for aluminum alloys Suitable for use at a minimum 20% concentration for high and low temperatures Long lifetime Low acute oral toxicity Free of nitrite, borax and CMR Available in various package sizes and blends. Suitable applications include: single fluid process heating and cooling; closed-loop, water-based heating and air conditioning systems where propylene glycol-based fluids are preferred or required; and food industry applications within temperature range.

DOWCAL™ N

A NSF-approved, propylene glycol-based fluid that is low in acute oral toxicity and widely used to depress freeze points in food and beverage processing and in other applications.

Dowcal™ N features a specially formulated corrosion inhibitor package and can be used for direct and indirect food additive applications. Available in various package sizes and blends. Propylene glycol based fluid Better freeze protection Better corrosion protection in hot and cold systems FDA-approved safe food additive Compatible with commonly used elastomers Long fluid life and low maintenance costs Greater cost-effectiveness Low acute oral toxicity Used to depress freeze points in food and beverage processing and in other applications

GlideCote®

Regular maintenance of saw tables and receiving tables with Bostik® Glidecote® significantly reduces sliding friction on all metal, laminate, and plastic surfaces.

Regular maintenance of saw tables and receiving tables with Bostik® Glidecote® significantly reduces sliding friction on all metal, laminate, and plastic surfaces. *Formerly known as TopCote® Aerosol 10.75 oz. Eliminates “hang-ups” on sliding surfaces. Protects all tools and equipment from rust. Up to 30% slicker than paste wax. Easier and quicker to apply than paste wax. Lasts three times (3x) longer than paste wax. Contains no silicone or petroleum oil. Will not stain wood or interfere with glues or finishes. Perfect for table saw beds, drill presses, lathes, planers, band saws, miters, panel saws, and all hand tools. Environmentally safer aerosol, no CFC’s or ODC's n Bostik Glidecote® Meets or Exceeds Federal, State, and Local VOC standards for Voc Content, including EPA, CARB, AQMDs and OTC. Wood Working - Table saw - Panel saws - Gang rip saws - Jointers - Shapers - Band saws - Edgers - Pneumatic Tools Other - Release Agent For: Injection molds, Printing plates - Printing & Binding Uses: Sliding surfaces, Conveyor rollers

Krytox™ 143AD Oil

Krytox™ 143AD Oil has a viscosity of 450 cSt @ 40°C.

Krytox™ aerospace lubricants were created by Chemours to withstand the rigors of orbital flights in the vacuum of space. 143AD Oil has a viscosity of 450 cSt @ 40 degrees C. Average MW: 7480 Viscosity @40C: 450 Viscosity Index: 146 Pour Point °C: -35 Density @0°C (32°F): 1.95 Vapor Pressure (torr) @38°C (100°F): 6 x 10(–9) Estimated Useful Range °C: –29–316

Krytox™ 143AZ Oil

Krytox™ 143AZ Oil has a viscosity of 22.8 cSt @ 40°C.

Krytox™ aerospace lubricants were created by Chemours to withstand the rigors of orbital flights in the vacuum of space. 143AZ Oil has a viscosity of 22.8 cSt @ 40 degrees C. Average MW: 2060 Viscosity @40C: 22.8 Viscosity Index: 60 Pour Point °C: -55 Density @0°C (32°F): 1.91 Vapor Pressure (torr) @38°C (100°F): 4 x 10(–4) Estimated Useful Range °C: –57–149

Krytox™ 4442 Oil

Krytox™ 4442 Oil has been blended for use in colder ambient conditions.

Krytox™ 4442 Oil has been blended for use in cold to warm ambient conditions. If the application is to be run continuously at high temperatures, the use of standard Krytox™ GPL100 Series of Oils is recommended. This oil has a viscosity of 50 cSt @40°C Performs well in colder temperature applications.

Krytox™ GBO 14 Oil

Krytox™ GBO 14 Oil has no additives and is recommended for use where an inert, nonflammable lubricant is needed. Krytox™ GBO 14 is a 40 cSt oil at 40°C.

Krytox™ GBO 14 Oil is a high performance, extreme pressure, water-resistant product for your most demanding needs. Krytox™ GBO 14 Oil provides stable performance in temperature extremes and is designed to reduce friction and wear, while extending equipment life in severe duty applications. Krytox™ GBO 14 Oil is extremely resistant to water washout for bearings, gear boxes and other equipment. Krytox™ GBO 14 Oil does not damage plastic or elastomer seals or cause corrosion to metals. It is nonflammable and safe for use in oxygen service. Base Oil Viscosity, 40 °C (104 °F), cSt: 50 Volatility, 24 hr, 100 °C (212 °F), %: 2.1 Base Oil Density, g/mL: 1.90 Krytox™ GBO 14 Oil doesn’t carbonize and gum up with age to cause catastrophic failure. Krytox™ GBO 14 Oil has been blended for use in cold to ambient conditions. Krytox™ GBO 14 Oil is inert and will not react with any materials they may come in contact with. Its polymeric nature is extremely resistant to moisture, so the lubricant stays in place during cleaning. Cleaners and disinfectants, both acidic and caustic types, does not affect it. Steam and high temperatures will not damage the lubricant.

Krytox™ GBO 14 UV Dye

easier leak detection.

This Krytox™ GBO 14 Oil with UV dye is recommended for use where an inert, nonflammable lubricant is needed. Krytox™ GBO 14 UV Dye is a 40 cSt oil at 40°C. UV Dye has been added to the formulation for...

Krytox™ GBO 14 Oil UV Dye is a high performance, extreme pressure, water-resistant product for your most demanding needs. Krytox™ GBO 14 Oil UV Dye provides stable performance in temperature extremes and is designed to reduce friction and wear, while extending equipment life in severe duty applications. Krytox™ GBO 14 Oil UV Dye is extremely resistant to water washout for bearings, gear boxes and other equipment. Krytox™ GBO 14 Oil UV Dye does not damage plastic or elastomer seals or cause corrosion to metals. It is nonflammable and safe for use in oxygen service. Base Oil Viscosity, 40 °C (104 °F), cSt: 50 Volatility, 24 hr, 100 °C (212 °F), %: 2.1 Base Oil Density, g/mL: 1.90 Krytox™ GBO 14 Oil UV Dye doesn’t carbonize and gum up with age to cause catastrophic failure. Krytox™ GBO 14 Oil UV Dye has been blended for use in cold to ambient conditions. Krytox™ GBO 14 Oil UV Dye is inert and will not react with any materials it may come in contact with. Its polymeric nature is extremely resistant to moisture, so the lubricant stays in place during cleaning. Cleaners and disinfectants, both acidic and caustic types, does not affect them. Steam and high temperatures will not damage the lubricant.

Krytox™ GPL101 Oil

Krytox™ GPL101 Oil is a clear, colorless, fluorinated synthetic oil. Useful Operating Range: -70°C to 104°C.

Krytox™ GPL101 Oil is a clear, colorless, fluorinated synthetic oil. Krytox™ GPL101 has a viscosity of 7.8 cSt @40°C. This grease is suitable to use in applications up to 104°C. ISO Grade: 7 Estimated Useful Range: -70°C to 104°C Oil Viscosity @40°C: 7.8 Oil Pour Point: -70°C Oil Density, g/ml @0°C: 1.89 Maximum Oil Volatility, % in 22 hr @121°C: 75 Oil Separation, wt loss, % in 30 hr @99°C: 9% Food Grade Compatible (H1): No Krytox™ GPL101 Oil is nonreactive, nonflammable, safe in chemical and oxygen service, and long-lasting.

Krytox™ GPL102 Oil

Krytox™ GPL102 Oil is a clear, colorless, fluorinated synthetic oil. Useful Operating Range: -63°C to 132°C.

Krytox™ GPL102 Oil is a clear, colorless, fluorinated synthetic oil. Krytox™ GPL102 has a viscosity of 15 cSt @40°C. This grease is suitable to use in applications up to 132°C. ISO Grade: 15 Estimated Useful Range: -63°C to 132°C Oil Viscosity @40°C: 15 Oil Viscosity Index: 29 Oil Pour Point: -63°C Oil Density, g/ml @0°C: 1.91 Maximum Oil Volatility, % in 22 hr @121°C: 35 Oil Separation, wt loss, % in 30 hr @99°C: 7% Food Grade Compatible (H1): No Krytox™ GPL102 Oil is nonreactive, nonflammable, safe in chemical and oxygen service, and long-lasting.

Krytox™ GPL103 Oil

Krytox™ GPL103 Oil is a clear, colorless, fluorinated synthetic oil. Useful Operating Range: -60°C to 154°C.

Krytox™ GPL103 Oil is a clear, colorless, fluorinated synthetic oil. Krytox™ GPL103 has a viscosity of 30 cSt @40°C. This grease is suitable to use in applications up to 154°C. ISO Grade: 32 Estimated Useful Range: -60°C to 154°C Oil Viscosity @40°C: 30 Oil Viscosity Index: 92 Oil Pour Point: -60°C Oil Density, g/ml @0°C: 1.92 Maximum Oil Volatility, % in 22 hr @121°C: 7 Oil Separation, wt loss, % in 30 hr @99°C: 6% Food Grade Compatible (H1): No Krytox™ GPL103 Oil is nonreactive, nonflammable, safe in chemical and oxygen service, and long-lasting.

Krytox™ GPL104 Oil

Krytox™ GPL104 Oil is a clear, colorless, fluorinated synthetic oil. Useful Operating Range: -51°C to 179°C.

Krytox™ GPL104 Oil is a clear, colorless, fluorinated synthetic oil. Krytox™ GPL104 has a viscosity of 60 cSt @40°C. This grease is suitable to use in applications up to 179°C. ISO Grade: 68 Estimated Useful Range: -51°C to 179°C Oil Viscosity @40°C: 60 Oil Viscosity Index: 111 Oil Density, g/ml @0°C: 1.93 Oil Pour Point: -51°C Maximum Oil Volatility, % in 22 hr @121°C: 3 Oil Separation, wt loss, % in 30 hr @99°C: 5% Food Grade Compatible (H1): No Krytox™ GPL104 Oil is nonreactive, nonflammable, safe in chemical and oxygen service, and long-lasting.

Krytox™ GPL105 Oil

Krytox™ GPL105 Oil is a clear, colorless, fluorinated synthetic oil. Useful Operating Range: -36°C to 204°C. Krytox™ GPL105 Oil is food grade compatible (H1).

Krytox™ GPL105 Oil is a clear, colorless, fluorinated synthetic oil. Krytox™ GPL105 has a viscosity of 160 cSt @40°C. This grease is suitable to use in applications up to 204°C. Krytox™ GPL105 Oil is Food Grade Compatible (H1), ISO Grade: 150 Estimated Useful Range: -36°C to 204°C Oil Viscosity @40°C: 160 Oil Viscosity Index: 124 Oil Pour Point: -36°C Oil Density, g/ml @0°C: 1.94 Maximum Oil Volatility, % in 22 hr @121°C: 1 Oil Separation, wt loss, % in 30 hr @99°C: 5% Food Grade Compatible (H1): Yes Krytox™ GPL105 Oil is nonreactive, nonflammable, safe in chemical and oxygen service, and long-lasting.

Krytox™ GPL106 Oil

Krytox™ GPL106 Oil is a clear, colorless, fluorinated synthetic oil. Useful Operating Range: -36°C to 260°C.

Krytox™ GPL106 Oil is a clear, colorless, fluorinated synthetic oil. Krytox™ GPL106 has a viscosity of 243 cSt @40°C. This grease is suitable to use in applications up to 260°C. ISO Grade: 220 Estimated Useful Range: -36°C to 260°C Oil Viscosity @40°C: 243 Oil Viscosity Index: 134 Oil Pour Point: -36°C Oil Density, g/ml @0°C: 1.95 Maximum Oil Volatility, % in 22 hr @121°C: 1 Oil Separation, wt loss, % in 30 hr @99°C: 4% Food Grade Compatible (H1): No Krytox™ GPL106 Oil is nonreactive, nonflammable, safe in chemical and oxygen service, and long-lasting.

Krytox™ GPL107 Oil

Krytox™ GPL107 Oil is a clear, colorless, fluorinated synthetic oil. Useful Operating Range: -30°C to 288°C.

Krytox™ GPL107 Oil is a clear, colorless, fluorinated synthetic oil. Krytox™ GPL107 has a viscosity of 450 cSt @ 40° C. This grease is suitable to use in applications up to 550° F. ISO Grade: 460 Estimated Useful Range: -30°C to 288°C Oil Viscosity @40°C: 450 Oil Viscosity Index: 145 Oil Pour Point: -30°C Oil Density, g/ml @0°C: 1.95 Maximum Oil Volatility, % in 22 hr @121°C: 0.01 Oil Separation, wt loss, % in 30 hr @99°C: 4% Food Grade Compatible (H1): No Krytox™ GPL107 Oil is nonreactive, nonflammable, safe in chemical and oxygen service, and long-lasting.

Krytox™ GPL201 Grease

non-flammable and lower range temperature range use is required.

Krytox™ GPL201 Grease has all of the same properties as the Krytox™ GPL101 oil that it is made from, but thickened with PTFE to a standard NLGI Grade 2. Krytox™ GPL201 Grease is a general use lubricant for applications where inert,...

Krytox™ GPL201 Grease is high performance grease utilizing PFPE oil and thickened with PTFE powder. Commonly used in the automotive and industrial market, applications for these greases include, but are not limited to, bearings, valves, gears, seals, and pumps. Krytox™ GPL201 has a base oil viscosity of 7.8 cSt @40°C. This grease is suitable to use in applications up to 104°C. Krytox™ GPL201 greases are white buttery greases with all of the same properties as the Krytox™ GPL101 oils that they are made from, but they are in grease form. GPL201 grade has lower molecular weight of the base PFPE oil, to improve functionality at lower temperatures for specific applications. ISO Grade: 7 Estimated Useful Range: -70°C to 104°C Oil Viscosity @40°C: 7.8 Oil Pour Point: -70°C Oil Density, g/ml @0°C: 1.89 Maximum Oil Volatility, % in 22 hr @121°C: 75 Oil Separation, wt loss, % in 30 hr @99°C: 9% Food Grade Compatible (H1): No NLGI Grade: 2 Additives: None Krytox™ GPL200 Series Greases are white, fluorinated synthetic greases that are non-reactive, nonflammable, safe in chemical and oxygen service, and are long-lasting.

Krytox™ GPL202 Grease

non-flammable and lower to mid range temperature range use is required.

Krytox™ GPL202 Grease has all of the same properties as the Krytox™ GPL102 oil that it is made from, but thickened with PTFE to a standard NLGI Grade 2. Krytox™ GPL202 Grease is a general use lubricant for applications where inert,...

Krytox™ GPL202 Grease is a high performance grease utilizing PFPE oil and thickened with PTFE powder. Commonly used in the automotive and industrial market, applications for these greases include, but are not limited to, bearings, valves, gears, seals, and pumps. Krytox™ GPL202 has a base oil viscosity of 15 cSt @40°C. This grease is suitable to use in applications up to 132°C. Krytox™ GPL202 greases are white buttery greases with all of the same properties as the Krytox™ GPL102 oils that they are made from, but they are in grease form. GPL202 grade has lower molecular weight of the base PFPE oil, to improve functionality at lower temperatures for specific applications. ISO Grade: 15 Estimated Useful Range: -63°C to 132°C Oil Viscosity @40°C: 15 Oil Viscosity Index: 29 Oil Pour Point: -63°C Oil Density, g/ml @0°C: 1.91 Maximum Oil Volatility, % in 22 hr @121°C: 35 Oil Separation, wt loss, % in 30 hr @99°C: 7% Food Grade Compatible (H1): Yes NLGI Grade: 2 Additives: None Krytox™ GPL200 Series Greases are white, fluorinated synthetic greases that are non-reactive, nonflammable, safe in chemical and oxygen service, and are long-lasting.

Krytox™ GPL203 Grease

lubricant for applications where inert, non-flammable and mid range temperature range use is required.

Krytox™ GPL203 Grease is a white buttery grease with all of the same properties as the Krytox™ GPL102 oil that it is made from, but thickened with PTFE to a standard NLGI Grade 2. Krytox™ GPL203 Grease is a general use...

A high performance grease utilizing PFPE oil and thickened with PTFE powder. Commonly used in the automotive and industrial market, applications for these greases include, but are not limited to, bearings, valves, gears, seals, and pumps. Krytox™ GPL203 has a base oil viscosity of 30 cSt @40°C. This grease is suitable to use in applications up to 154°C. Krytox™ GPL203 greases are white buttery greases with all of the same properties as the Krytox™ GPL103 oils that they are made from, but they are in grease form. GPL203 grade has lower to mid molecular weight of the base PFPE oil, to improve functionality at mid level temperatures for specific applications. ISO Grade: 32 Estimated Useful Range: -60°C to 154°C Oil Viscosity @40°C: 30 Oil Viscosity Index: 92 Oil Pour Point: -60°C Oil Density, g/ml @0°C: 1.92 Maximum Oil Volatility, % in 22 hr @121°C: 7 Oil Separation, wt loss, % in 30 hr @99°C: 6% Food Grade Compatible (H1): Yes NLGI Grade: 2 Additives: None General use lubricant for applications where inert, non-flammable and mid range temperature range use is required. GPL203 is typically applied where lower temperature range operating conditions are expected.

Krytox™ GPL203 Grease Grade 1

Krytox™ GPL203 Grease Grade 1 has all of the same properties as the Krytox™ GPL103 oil that it is made from, but thickened with PTFE to a NLGI Grade 1.

Krytox™ GPL203 Grease Grade 1 is high performance grease utilizing PFPE oil and thickened with PTFE powder. Commonly used in the automotive and industrial market, applications for these greases include, but are not limited to, bearings, valves, gears, seals, and pumps. Krytox™ GPL203 has a base oil viscosity of 30 cSt @40°C. This grease is suitable to use in applications up to 154°C. Krytox™ GPL203 greases are white buttery greases with all of the same properties as the Krytox™ GPL103 oils that they are made from, but they are in grease form. GPL203 grade has lower to mid molecular weight of the base PFPE oil, to improve functionality at mid level temperatures for specific applications. ISO Grade: 15 Estimated Useful Range: -60°C to 154°C Oil Viscosity @40°C: 30 Oil Viscosity Index: 92 Oil Pour Point: -60°C Oil Density, g/ml @0°C: 1.92 Maximum Oil Volatility, % in 22 hr @121°C: 7 Oil Separation, wt loss, % in 30 hr @99°C: 6% Food Grade Compatible (H1): Yes NLGI Grade: 1 Additives: None General use lubricant for applications where inert, non-flammable and mid range temperature range use is required. GPL203 is typically applied where lower temperature range operating conditions are expected.

Krytox™ GPL204 Grease

non-flammable and mid range temperature range use is required.

Krytox™ GPL204 Grease has all of the same properties as the Krytox™ GPL104 oil that it is made from, but thickened with PTFE to a standard NLGI Grade 2. Krytox™ GPL204 Grease is a general use lubricant for applications where inert,...

Krytox™ GPL204 Grease is a high performance grease utilizing PFPE oil and thickened with PTFE powder. Commonly used in the automotive and industrial market, applications for these greases include, but are not limited to, bearings, valves, gears, seals, and pumps. Krytox™ GPL204 has a base oil viscosity of 60 cSt @40°C. This grease is suitable to use in applications up to 179°C. Krytox™ GPL204 greases are white buttery greases with all of the same properties as the Krytox™ GPL104 oils that they are made from, but they are in grease form. GPL204 grade has meidum molecular weight of the base PFPE oil, to improve functionality at middle range temperatures for specific applications. ISO Grade: 68 Estimated Useful Range: -51°C to 179°C Oil Viscosity @40°C: 60 Oil Viscosity Index: 111 Oil Density, g/ml @0°C: 1.93 Oil Pour Point: -51°C Maximum Oil Volatility, % in 22 hr @121°C: 3 Oil Separation, wt loss, % in 30 hr @99°C: 5% Food Grade Compatible (H1): No NLGI Grade: 2 Additives: None Krytox™ GPL200 Series Greases are white, fluorinated synthetic greases that are non-reactive, nonflammable, safe in chemical and oxygen service, and are long-lasting.

Krytox™ GPL205 Grease

non-flammable and mid range temperature range use is required.

Krytox™ GPL205 Grease has all of the same properties as the Krytox™ GPL105 oil that it is made from, but thickened with PTFE to a standard NLGI Grade 2. Krytox™ GPL205 Grease is a general use lubricant for applications where inert,...

Krytox™ GPL205 Grease is a high performance grease utilizing PFPE oil and thickened with PTFE powder. Commonly used in the automotive and industrial market, applications for these greases include, but are not limited to, bearings, valves, gears, seals, and pumps. Krytox™ GPL205 has a base oil viscosity of 160 cSt @40°C. This grease is suitable to use in applications up to 204°C. Krytox™ GPL205 greases are white buttery greases with all of the same properties as the Krytox™ GPL105 oils that they are made from, but they are in grease form. GPL205 grade has medium molecular weight of the base PFPE oil, to improve functionality at middle range temperatures for specific applications. ISO Grade: 150 Estimated Useful Range: -36°C to 204°C Oil Viscosity @40°C: 160 Oil Viscosity Index: 124 Oil Pour Point: -36°C Oil Density, g/ml @0°C: 1.94 Maximum Oil Volatility, % in 22 hr @121°C: 1 Oil Separation, wt loss, % in 30 hr @99°C: 5% Food Grade Compatible (H1): Yes NLGI Grade: 2 Additives: None A high performance grease utilizing PFPE oil and thickened with PTFE powder. Commonly used in the automotive and industrial market, applications for these greases include, but are not limited to, bearings, valves, gears, seals, and pumps. Premium midrange general purpose grease for mechanical parts like bearings, chains and rollers. Reactive gas resistant and compatible with most plastics. Can be used in NVH solutions and food grade applications.

Krytox™ GPL206 Grease

non-flammable and mid to high temperature range use is required.

Krytox™ GPL206 Grease has all of the same properties as the Krytox™ GPL106 oil that it is made from, but thickened with PTFE to a standard NLGI Grade 2. Krytox™ GPL206 Grease is a general use lubricant for applications where inert,...

Krytox™ GPL206 Grease is a high performance grease utilizing PFPE oil and thickened with PTFE powder. Commonly used in the automotive and industrial market, applications for these greases include, but are not limited to, bearings, valves, gears, seals, and pumps. Krytox™ GPL206 has a base oil viscosity of 243 cSt @40°C. This grease is suitable to use in applications up to 260°C. Krytox™ GPL206 greases are white buttery greases with all of the same properties as the Krytox™ GPL106 oils that they are made from, but they are in grease form. GPL206 grade has medium to high molecular weight of the base PFPE oil, to improve functionality at higher range temperatures for specific applications. ISO Grade: 220 Estimated Useful Range: -36°C to 260°C Oil Viscosity @40°C: 243 Oil Viscosity Index: 134 Oil Pour Point: -36°C Oil Density, g/ml @0°C: 1.95 Maximum Oil Volatility, % in 22 hr @121°C: 1 Oil Separation, wt loss, % in 30 hr @99°C: 4% Food Grade Compatible (H1): Yes NLGI Grade: 2 Additives: None Krytox™ GPL200 Series Greases are white, fluorinated synthetic greases that are non-reactive, nonflammable, safe in chemical and oxygen service, and are long-lasting.

Krytox™ GPL207 Grease

non-flammable and highest range temperature range use is required.

Krytox™ GPL207 Grease has all of the same properties as the Krytox™ GPL107 oil that it is made from, but thickened with PTFE to a standard NLGI Grade 2. Krytox™ GPL207 Grease is a general use lubricant for applications where inert,...

Krytox™ GPL207 Grease provides lubrication for valves and bearings and does not contain specialty additives. A PFPE base oil with PTFE thickener, Krytox™ GPL207 can be used in equipment that comes into contact with reactive chemicals, seal barrier fluids and oxygen systems. Krytox™ GPL207 has a base oil viscosity of 450 cSt @40°C. This grease is suitable to use in applications up to 288°C. Krytox™ GPL207 greases are white buttery greases with all of the same properties as the Krytox™ GPL107 oils that they are made from, but they are in grease form. GPL207 grade has high molecular weight of the base PFPE oil, to improve functionality at higher temperatures for specific applications. ISO Grade: 460 Estimated Useful Range: -30°C to 288°C Oil Viscosity @40°C: 450 Oil Viscosity Index: 145 Oil Pour Point: -30°C Oil Density, g/ml @0°C: 1.95 Maximum Oil Volatility, % in 22 hr @121°C: 0.01 Oil Separation, wt loss, % in 30 hr @99°C: 4% Food Grade Compatible (H1): Yes NLGI Grade: 2 Additives: None General use lubricant for applications where inert, non-flammable and mid range temperature range use is required. High molecular weight of the base oil allows operation at higher temperatures for specific applications. A high performance grease utilizing PFPE oil and thickened with PTFE powder. Commonly used in the automotive and industrial market, applications for these greases include, but are not limited to, bearings, valves, gears, seals, and pumps. Krytox™ GPL207 has a base oil viscosity of 450 cSt @ 40° C. This grease is suitable to use in applications up to 550° F.

Krytox™ GPL212 Grease

Krytox™ GPL212 Grease is a black colored grease that is essentially Krytox™ GPL202 Grease with a molybdenum disulfide additive for applications requiring extreme pressure resistance for highly loaded gears and bearings.

Krytox™ GPL212 Grease is a high performance grease utilizing PFPE oil, PTFE thickener, and molybdenum disulfide as an extreme pressure additive. Commonly used in the automotive and industrial market, applications for these greases include, but are not limited to, highly loaded bearings and gears. Krytox™ GPL212 has a base oil viscosity of 15 cSt @ 40 degrees C. This grease is suitable to use in applications up to 270 degrees F. ISO Grade: 15 Estimated Useful Range: -63°C to 132°C Oil Viscosity @40°C: 15 Oil Viscosity Index: 29 Oil Pour Point: -63°C Oil Density, g/ml @0°C: 1.91 Maximum Oil Volatility, % in 22 hr @121°C: 35 Oil Separation, wt loss, % in 30 hr @99°C: 7% Food Grade Compatible (H1): No NLGI Grade: 2 Additives: Molybdenum Disulfide (Extreme Pressure) Krytox™ GPL210 Series Greases are black, fluorinated synthetic greases that are non-reactive, nonflammable, safe in chemical and oxygen service, and are long-lasting. Special MoS additive is included for extreme pressure applications.

Krytox™ GPL214 Grease

Krytox™ GPL214 Grease is a black colored grease that is essentially Krytox™ GPL204 Grease with a molybdenum disulfide additive for applications requiring extreme pressure resistance for highly loaded gears and bearings.

Krytox™ GPL214 is a high performance grease utilizing PFPE oil, PTFE thickener, and molybdenum disulfide as an extreme pressure additive. Commonly used in the automotive and industrial market, applications for these greases include, but are not limited to, highly loaded bearings and gears. Krytox™ GPL214 has a base oil viscosity of 60 cSt @40°C. This grease is suitable to use in applications up to 179°C. GPL214 grade has meidum molecular weight of the base PFPE oil, to improve functionality at middle range temperatures for specific applications. ISO Grade: 68 Estimated Useful Range: -51°C to 179°C Oil Viscosity @40°C: 60 Oil Viscosity Index: 111 Oil Density, g/ml @0°C: 1.93 Oil Pour Point: -51°C Maximum Oil Volatility, % in 22 hr @121°C: 3 Oil Separation, wt loss, % in 30 hr @99°C: 5% Food Grade Compatible (H1): No NLGI Grade: 2 Additives: Molebdenum Disulfide (Extreme Pressure) Krytox™ GPL214 Grease is a black, fluorinated synthetic grease that is non-reactive, nonflammable, safe in chemical and oxygen service, and long-lasting. Special MoS additive is included for extreme pressure applications.

Krytox™ GPL215 Grease

Krytox™ GPL215 Grease is a black colored grease that is essentially Krytox™ GPL205 Grease with a molybdenum disulfide additive for applications requiring extreme pressure resistance for highly loaded gears and bearings.

Krytox™ GPL215 Grease is a high performance grease utilizing PFPE oil, PTFE thickener, and molybdenum disulfide as an extreme pressure additive. Commonly used in the automotive and industrial market, applications for these greases include, but are not limited to, highly loaded bearings and gears. Krytox™ GPL215 has a base oil viscosity of 160 cSt @ 40 degrees C. This grease is suitable to use in applications up to 400 degrees F. ISO Grade: 150 Estimated Useful Range: -36°C to 204°C Oil Viscosity @40°C: 160 Oil Viscosity Index: 124 Oil Pour Point: -36°C Oil Density, g/ml @0°C: 1.94 Maximum Oil Volatility, % in 22 hr @121°C: 1 Oil Separation, wt loss, % in 30 hr @99°C: 5% Food Grade Compatible (H1): No NLGI Grade: 2 Additives: Molebdenum Disulfide (Extreme Pressure) Krytox™ GPL215 Grease is a black, fluorinated synthetic grease that is non-reactive, nonflammable, safe in chemical and oxygen service, and long-lasting. Special MoS additive is included for extreme pressure applications.

Krytox™ GPL216 Grease

Krytox™ GPL216 Grease is a black colored grease that is essentially Krytox™ GPL206 Grease with a molybdenum disulfide additive for applications requiring extreme pressure resistance for highly loaded gears and bearings.

Krytox™ GPL216 Grease is a high performance grease utilizing PFPE oil, PTFE thickener, and molybdenum disulfide as an extreme pressure additive. Commonly used in the automotive and industrial market, applications for these greases include, but are not limited to, highly loaded bearings and gears. Krytox™ GPL216 has a base oil viscosity of 243 cSt @ 40 degrees C. This grease is suitable to use in applications up to 500 degrees F. ISO Grade: 220 Estimated Useful Range: -36°C to 260°C Oil Viscosity @40°C: 243 Oil Viscosity Index: 134 Oil Pour Point: -36°C Oil Density, g/ml @0°C: 1.95 Maximum Oil Volatility, % in 22 hr @121°C: 1 Oil Separation, wt loss, % in 30 hr @99°C: 4% Food Grade Compatible (H1): No NLGI Grade: 2 Additives: Molebdenum Disulfide (Extreme Pressure) Krytox™ GPL216 Grease is a black, fluorinated synthetic grease that is non-reactive, nonflammable, safe in chemical and oxygen service, and long-lasting. Special MoS additive is included for extreme pressure applications.

Krytox™ GPL217 Grease

Krytox™ GPL217 Grease is a black colored grease that is essentially Krytox™ GPL207 Grease with a molybdenum disulfide additive for applications requiring extreme pressure resistance for highly loaded gears and bearings.

Krytox™ GPL217 Grease is a high performance grease utilizing PFPE oil, PTFE thickener, and molybdenum disulfide as an extreme pressure additive. Commonly used in the automotive and industrial market, applications for these greases include, but are not limited to, highly loaded bearings and gears. Krytox™ GPL217 has a base oil viscosity of 450 cSt @ 40 degrees C. This grease is suitable to use in applications up to 550 degrees F. ISO Grade: 460 Estimated Useful Range: -30°C to 288°C Oil Viscosity @40°C: 450 Oil Viscosity Index: 145 Oil Pour Point: -30°C Oil Density, g/ml @0°C: 1.95 Maximum Oil Volatility, % in 22 hr @121°C: 0.01 Oil Separation, wt loss, % in 30 hr @99°C: 4% Food Grade Compatible (H1): No NLGI Grade: 2 Additives: Molebdenum Disulfide (Extreme Pressure) Krytox™ GPL217 Grease is a black, fluorinated synthetic grease that is non-reactive, nonflammable, safe in chemical and oxygen service, and long-lasting. Special MoS additive is included for extreme pressure applications.

Krytox™ GPL221 Grease

Krytox™ GPL221 Grease is Krytox™ GPL201 Grease with anti-corrosion/anti-wear additive. Provides rust protection at ambient temperatures and corrosion protection at high temperatures.

Krytox™ GPL221 is a high performance grease utilizing PFPE oil, PTFE thickener, and sodium nitrite as an anti-corrosion additive. Commonly used in the automotive and industrial market, applications for these greases include, but are not limited to, bearings, valves, gears, seals, and pumps. Krytox™ GPL221 has a base oil viscosity of 7.8 cSt @40°C. This grease is suitable to use in applications up to 104°C. Krytox™ GPL221 greases are white buttery greases with all of the same properties as the Krytox™ GPL101 oils that they are made from, but they are in grease form. GPL221 grade has lower molecular weight of the base PFPE oil, to improve functionality at lower temperatures for specific applications. ISO Grade: 7 Estimated Useful Range: -70°C to 104°C Oil Viscosity @40°C: 7.8 Oil Pour Point: -70°C Oil Density, g/ml @0°C: 1.89 Maximum Oil Volatility, % in 22 hr @121°C: 75 Oil Separation, wt loss, % in 30 hr @99°C: 9% Food Grade Compatible (H1): No NLGI Grade: 2 Additives: Sodium Nitrite (Anti- Corrosion) Krytox™ GPL221 Grease is an anti-corrosion grease containing sodium nitrite. It provides rust protection at ambient temperatures, corrosion protection at high temperatures, and anti-wear protection.

Krytox™ GPL222 Grease

Krytox™ GPL222 Grease is Krytox™ GPL202 Grease with anti-corrosion/anti-wear additive. Provides rust protection at ambient temperatures and corrosion protection at high temperatures.

Krytox™ GPL222 is a high performance grease utilizing PFPE oil, PTFE thickener, and sodium nitrite as an anti-corrosion additive. Commonly used in the automotive and industrial market, applications for these greases include, but are not limited to, bearings, valves, gears, seals, and pumps. Krytox™ GPL222 has a base oil viscosity of 15 cSt @40°C. This grease is suitable to use in applications up to 132°C. Krytox™ GPL222 greases are white buttery greases with all of the same properties as the Krytox™ GPL102 oils that they are made from, but they are in grease form. GPL222 grade has lower molecular weight of the base PFPE oil, to improve functionality at lower temperatures for specific applications. ISO Grade: 15 Estimated Useful Range: -63°C to 132°C Oil Viscosity @40°C: 15 Oil Viscosity Index: 29 Oil Pour Point: -63°C Oil Density, g/ml @0°C: 1.91 Maximum Oil Volatility, % in 22 hr @121°C: 35 Oil Separation, wt loss, % in 30 hr @99°C: 7% Food Grade Compatible (H1): No NLGI Grade: 2 Additives: Sodium Nitrite (Anti Corrosion) Krytox™ GPL222 Grease is an anti-corrosion grease containing sodium nitrite. It provides rust protection at ambient temperatures and corrosion protection at high temperatures.

Krytox™ GPL223 Grease

Krytox™ GPL223 Grease is Krytox™ GPL203 Grease with anti-corrosion/anti-wear additive. Provides rust protection at ambient temperatures and corrosion protection at high temperatures.

Krytox™ GPL223 is a high performance grease utilizing PFPE oil, PTFE thickener, and sodium nitrite as an anti-corrosion additive. Commonly used in the automotive and industrial market, applications for these greases include, but are not limited to, bearings, valves, gears, seals, and pumps. Krytox™ GPL223 has a base oil viscosity of 30 cSt @40°C. This grease is suitable to use in applications up to 154°C. Krytox™ GPL223 greases are white buttery greases with all of the same properties as the Krytox™ GPL103 oils that they are made from, but they are in grease form. GPL223 grade has lower to mid molecular weight of the base PFPE oil, to improve functionality at mid level temperatures for specific applications. ISO Grade: 32 Estimated Useful Range: -60°C to 154°C Oil Viscosity @40°C: 30 Oil Viscosity Index: 92 Oil Pour Point: -60°C Oil Density, g/ml @0°C: 1.92 Maximum Oil Volatility, % in 22 hr @121°C: 7 Oil Separation, wt loss, % in 30 hr @99°C: 6% Food Grade Compatible (H1): Yes NLGI Grade: 2 Additives: Sodium Nitrite (Anti Corrosion) Krytox™ GPL223 Grease is an anti-corrosion grease containing sodium nitrite. It provides rust protection at ambient temperatures, corrosion protection at high temperatures, and anti-wear protection.

Krytox™ GPL225 Grade 3

Krytox™ GPL225 Grade 3 Grease is Krytox™ GPL205 Grease with anti-corrosion/anti-wear additive. Provides rust protection at ambient temperatures and corrosion protection at high temperatures. It is blended with PTFE thickener to NLGI Grade 3.

Krytox™ GPL225 Grade 3 Grease is Krytox™ GPL205 Grease with anti-corrosion/anti-wear additive. Provides rust protection at ambient temperatures and corrosion protection at high temperatures. It is blended with PTFE thickener to NLGI Grade 3. ISO Grade: 150 Estimated Useful Range: -36°C to 204°C Oil Viscosity @40°C: 160 Oil Viscosity Index: 124 Oil Pour Point: -36°C Oil Density, g/ml @0°C: 1.94 Maximum Oil Volatility, % in 22 hr @121°C: 1 Oil Separation, wt loss, % in 30 hr @99°C: 5% Food Grade Compatible (H1): Yes NLGI Grade: 3 Additives: Sodium Nitrite (Anti Corrosion) Krytox™ GPL225 Grease is an anti-corrosion grease containing sodium nitrite. It provides rust protection at ambient temperatures, corrosion protection at high temperatures, and anti-wear protection. NLGI Grade 3 is for applications where harder grease is required, typically due to elevated operating temperatures.

Krytox™ GPL225 Grease

Krytox™ GPL225 Grease is Krytox™ GPL205 Grease with anti-corrosion/anti-wear additive. Provides rust protection at ambient temperatures and corrosion protection at high temperatures.

Krytox™ GPL225 Grease is a high performance grease utilizing PFPE oil, PTFE thickener, and sodium nitrite as an anti-corrosion additive. Commonly used in the automotive and industrial market, applications for these greases include, but are not limited to, bearings, valves, gears, seals, and pumps. Krytox™ GPL215 has a base oil viscosity of 160 cSt @40°C. This grease is suitable to use in applications up to 204°C. Krytox™ GPL225 greases are white buttery greases with all of the same properties as the Krytox™ GPL105 oils that they are made from, but they are in grease form. GPL225 grade has medium molecular weight of the base PFPE oil, to improve functionality at middle range temperatures for specific applications. ISO Grade: 150 Estimated Useful Range: -36°C to 204°C Oil Viscosity @40°C: 160 Oil Viscosity Index: 124 Oil Pour Point: -36°C Oil Density, g/ml @0°C: 1.94 Maximum Oil Volatility, % in 22 hr @121°C: 1 Oil Separation, wt loss, % in 30 hr @99°C: 5% Food Grade Compatible (H1): Yes NLGI Grade: 2 Additives: Sodium Nitrite (Anti Corrosion) Krytox™ GPL225 Grease is an anti-corrosion grease containing sodium nitrite. It provides rust protection at ambient temperatures, corrosion protection at high temperatures, and anti-wear protection.

Krytox™ GPL226 Grease

Krytox™ GPL226 Grease is Krytox™ GPL206 Grease with anti-corrosion/anti-wear additive. Provides rust protection at ambient temperatures and corrosion protection at high temperatures.

Krytox™ GPL226 is a high performance grease utilizing PFPE oil, PTFE thickener, and sodium nitrite as an anti-corrosion additive. Commonly used in the automotive and industrial market, applications for these greases include, but are not limited to, bearings, valves, gears, seals, and pumps. Krytox™ GPL226 has a base oil viscosity of 243 cSt @40°C. This grease is suitable to use in applications up to 260°C. Krytox™ GPL226 greases are white buttery greases with all of the same properties as the Krytox™ GPL106 oils that they are made from, but they are in grease form. GPL226 grade has medium to high molecular weight of the base PFPE oil, to improve functionality at higher range temperatures for specific applications. ISO Grade: 220 Estimated Useful Range: -36°C to 260°C Oil Viscosity @40°C: 243 Oil Viscosity Index: 134 Oil Pour Point: -36°C Oil Density, g/ml @0°C: 1.95 Maximum Oil Volatility, % in 22 hr @121°C: 1 Oil Separation, wt loss, % in 30 hr @99°C: 4% Food Grade Compatible (H1): Yes NLGI Grade: 2 Additives: Sodium Nitrite (Anti Corrosion) Krytox™ GPL226 Grease is an anti-corrosion grease containing sodium nitrite. It provides rust protection at ambient temperatures, corrosion protection at high temperatures.

Krytox™ GPL227 Grease

Krytox™ GPL227 Grease is Krytox™ GPL207 Grease with anti-corrosion/anti-wear additive. Provides rust protection at ambient temperatures and corrosion protection at high temperatures.

Krytox™ GPL227 is a high performance grease utilizing PFPE oil, PTFE thickener, and sodium nitrite as an anti-corrosion additive. Commonly used in the automotive and industrial market, applications for these greases include, but are not limited to, bearings, valves, gears, seals, and pumps. Krytox™ GPL227 has a base oil viscosity of 450 cSt @40°C. This grease is suitable to use in applications up to 288°C. Krytox™ GPL227 greases are white buttery greases with all of the same properties as the Krytox™ GPL107 oils that they are made from, but they are in grease form. GPL227 grade has high molecular weight of the base PFPE oil, to improve functionality at higher temperatures for specific applications. ISO Grade: 460 Estimated Useful Range: -30°C to 288°C Oil Viscosity @40°C: 450 Oil Viscosity Index: 145 Oil Pour Point: -30°C Oil Density, g/ml @0°C: 1.95 Maximum Oil Volatility, % in 22 hr @121°C: 0.01 Oil Separation, wt loss, % in 30 hr @99°C: 4% Food Grade Compatible (H1): Yes NLGI Grade: 2 Additives: Sodium Nitrite (Anti Corrosion) Krytox™ GPL227 Grease is an anti-corrosion grease containing sodium nitrite. It provides rust protection at ambient temperatures, corrosion protection at high temperatures.

Krytox™ GPL255 Grease

Krytox™ GPL255 grease is a special product with fluorescing agent.

Krytox™ GPL255 grease is a special product with fluorescing agent in it to allow the use of a black light to determine the uniformity of an application. It is not intended for routine application as lubricants without qualification testing. The fluorescing additive is present at low levels, but its effect on lubrication performance has not been tested. Base Oil Viscosity, cSt 20 °C (68 °F) = 550 40 °C (104 °F) = 160 100 °C (212 °F) = 18 NLGI Grade 2 Appearance - White and buttery Allows the use of a black light to determine the uniformity of an application. Use black like to uncover surface areas where grease coverage is absent. For applications requiring 100% surface coverage or for applications with surface areas intentionally excluded from being covered by grease. Under ultraviolet light, the products give off a yellowish green color that is visible to the unaided eye. The only equipment necessary is a standard broad spectrum ultraviolet lamp, commonly known as a “black light.” Lamps that emit long wave ultraviolet light in the 365 nm range are available from almost any industrial supply company.

Krytox™ GPL294 Grease

Krytox™ GPL294 Grease has been formulated for high-temperature applications that need both high load carrying capacity and anti-corrosion protection. Krytox™ GPL294 Grease operates best under 179°C.

Krytox™ GPL294 Grease has been formulated for high-temperature applications that need both high load carrying capacity and anti-corrosion protection. Typical applications include conveyor chains that are subjected to moist conditions or frequent temperature cycling that could allow condensation and rusting to occur. Krytox™ GPL294 Grease has a viscosity of 180 cSt @20°C. ISO Grade: 68 Estimated Useful Range: -51°C to 179°C Oil Viscosity @40°C: 60 Oil Viscosity Index: 124 Oil Pour Point: -51°C Food Grade Compatible (H1): No NLGI Grade: 2 Additives: High Pressure and Anti-Corrosion Krytox™ GPL294 Grease combines both anti corrosion and extreme pressure additives for the most demanding applications in the lower temperature range. In testing, the 29X series shows improvement in load carrying and wear prevention over standard Krytox™ greases. Best choice for wet or temperature variable conditions that allows for condensation leading to rusting.

Krytox™ GPL295 Grease

Krytox™ GPL295 Grease has been formulated for high-temperature applications that need both high load carrying capacity and anti-corrosion protection. Krytox™ GPL295 Grease operates best under 204°C.

Krytox™ GPL295 Grease has been formulated for high-temperature applications that need both high load carrying capacity and anti-corrosion protection. Typical applications include conveyor chains that are subjected to moist conditions or frequent temperature cycling that could allow condensation and rusting to occur. Krytox™ GPL295 Grease has a viscosity of 550 cSt @20°C. ISO Grade: 150 Estimated Useful Range: -36°C to 204°C Oil Viscosity @40°C: 160 Oil Viscosity Index: 125 Oil Pour Point: -36°C Food Grade Compatible (H1): No NLGI Grade: 2 Additives: High Pressure and Anti-Corrosion Krytox™ GPL295 Grease combines both anti corrosion and extreme pressure additives for the most demanding applications in the lower to medium temperature range. In testing, the 29X series shows improvement in load carrying and wear prevention over standard Krytox™ greases. Best choice for wet or temperature variable conditions that allows for condensation leading to rusting.

Krytox™ GPL296 Grease

Krytox™ GPL296 Grease has been formulated for high-temperature applications that need both high load carrying capacity and anti-corrosion protection. Krytox™ GPL296 Grease operates best under 260°C.

Krytox™ GPL296 Grease has been formulated for high-temperature applications that need both high load carrying capacity and anti-corrosion protection. Typical applications include conveyor chains that are subjected to moist conditions or frequent temperature cycling that could allow condensation and rusting to occur. Krytox™ GPL296 Grease has a viscosity of 810 cSt @20°C. ISO Grade: 220 Estimated Useful Range: -36°C to 260°C Oil Viscosity @40°C: 240 Oil Viscosity Index: 134 Oil Pour Point: -36°C Food Grade Compatible (H1): No NLGI Grade: 2 Additives: High Pressure and Anti-Corrosion Krytox™ GPL296 Grease combines both anti corrosion and extreme pressure additives for the most demanding applications in the middle to high temperature range. In testing, the 29X series shows improvement in load carrying and wear prevention over standard Krytox™ greases. Best choice for wet or temperature variable conditions that allows for condensation leading to rusting.

Krytox™ GPL297 Grease

Krytox™ GPL297 Grease has been formulated for high-temperature applications that need both high load carrying capacity and anti-corrosion protection. Krytox™ GPL297 Grease operates best under 288°C.

Krytox™ GPL297 Grease has been formulated for high-temperature applications that need both high load carrying capacity and anti-corrosion protection. Typical applications include conveyor chains that are subjected to moist conditions or frequent temperature cycling that could allow condensation and rusting to occur. Krytox™ GPL297 Grease has a viscosity of 1600 cSt @20°C. ISO Grade: 460 Estimated Useful Range: -30°C to 288°C Oil Viscosity @40°C: 440 Oil Viscosity Index: 155 Oil Pour Point: -30°C Food Grade Compatible (H1): No NLGI Grade: 2 Additives: High Pressure and Anti-Corrosion Krytox™ GPL297 Grease combines both anti corrosion and extreme pressure additives for the most demanding applications in the higher temperature range. In testing, the 29X series shows improvement in load carrying and wear prevention over standard Krytox™ greases. Best choice for wet or temperature variable conditions that allows for condensation leading to rusting.

Krytox™ GPL577 Grease

Krytox™ GPL577 Grease is formulated with a high-viscosity base oil and proprietary additives, which improve performance at low speeds and high loads.

Krytox™ GPL577 Grease is formulated with a high-viscosity base oil and special additives. This results in a grease that can withstand extreme conditions of temperature and load. The high viscosity of the base oil, combined with the additives, yields a product that is able to maintain a good lubricating film in very slow speed or high load applications. Krytox™ GPL577 Grease's high base oil viscosity also results in a grease that evaporates very slowly under conditions of high vacuum or temperature. Like all standard Krytox™ products. Estimated Useful Range: 35°C to 300°C Oil Viscosity @40°C: 500 Oil Viscosity Index: 149 Oil Pour Point: -20°C Oil Density, g/ml @0°C: 1.95 Maximum Oil Volatility, % in 22 hr @121°C: <1% Oil Separation, wt loss, % in 30 hr @99°C: 1.5% Food Grade Compatible (H1): No NLGI Grade: 2 Additives: Proprietary Krytox™ GPL577 Grease is nonflammable, compatible with oxygen, and will not react with most chemicals.

Krytox™ L-100 AG Grease

Krytox™ L-100 AG Grease linear perfluoropolyethers (PFPEs) provide exceptional low volatility characteristics designed for use in semiconductor and aerospace environments.. Krytox™ L-100 AG Grease grade includes a anti-corrosion additive and has a viscosity of 233 cSt @20°C.

Krytox™ L-100 AG Grease linear perfluoropolyethers (PFPEs) provide exceptional low volatility characteristics for longer lubricant life. Krytox™ L-100 AG Grease grade includes a anti-corrosion additive and has a viscosity of 233 cSt @20°C NLGI Grade: 2 Food Contact Approval: None Useful Temperature Range, °C: –67 to 290 Base Oil Viscosity cSt @40°C: 100 Oil Viscosity Index: 206 Vapor Pressure Torr @20°C: 1.5 x 10–8 Pour Point °C: -67°C Oil Density, g/mL, 24°C: 1.86 Krytox™ L-100 AG Grease is compatible with most all materials commonly used in semiconductor environments, including metals, plastics, and elastomers. Krytox™ L-100 AG Grease is safe for use around fuels and oxidizers and have excellent load-carrying capacity. Krytox™ L-100 AG Grease is an excellent choice for use in high or ultra-high vacuum and aerospace environments where particulate generation is critical, or where high or extremely high temperatures exist. Surfaces to be lubricated with Krytox™ L-Series lubricants should be thoroughly cleaned before the grease is applied to remove organic rust inhibitors that could inhibit proper lubrication. These lubricants are extremely inert and will keep their lubricating properties, even after long periods of storage. Typical applications include all bearings, gears, valves, O-rings and any moving components, including robotics, in cleanroom and aerospace environments. Krytox™ L-Series linear greases are compatible with all plastic and metal components typically used in industrial applications.

Krytox™ L-100 G Grease

Krytox™ L-100 G Grease linear perfluoropolyethers (PFPEs) provide exceptional low volatility characteristics designed for use in semiconductor and aerospace environments. Krytox™ L-100 G grade has a viscosity of 233 cSt @20°C.

Krytox™ L-100 G Grease linear perfluoropolyethers (PFPEs) provide exceptional low volatility characteristics for longer lubricant life. Krytox™ L-100 G grade has a viscosity of 233 cSt @20°C NLGI Grade: 2 Food Contact Approval: None Useful Temperature Range, °C: –67 to 290 Base Oil Viscosity cSt @40°C: 100 Oil Viscosity Index: 206 Vapor Pressure Torr @20°C: 1.5 x 10–8 Pour Point °C: -67°C Oil Density, g/mL, 24°C: 1.86 Krytox™ L-100 G Grease is compatible with most all materials commonly used in semiconductor environments, including metals, plastics, and elastomers. Krytox™ L-100 G Grease is safe for use around fuels and oxidizers and have excellent load-carrying capacity. Krytox™ L-100 G Grease is an excellent choice for use in high or ultra-high vacuum and aerospace environments where particulate generation is critical, or where high or extremely high temperatures exist. Surfaces to be lubricated with Krytox™ L-Series lubricants should be thoroughly cleaned before the grease is applied to remove organic rust inhibitors that could inhibit proper lubrication. These lubricants are extremely inert and will keep their lubricating properties, even after long periods of storage. Typical applications include all bearings, gears, valves, O-rings and any moving components, including robotics, in cleanroom and aerospace environments. Krytox™ L-Series linear greases are compatible with all plastic and metal components typically used in industrial applications.

Krytox™ L-100XP Grease

Krytox™ L-100XP Grease linear perfluoropolyethers (PFPEs) provide exceptional low volatility characteristics for longer lubricant life. Krytox™ L-100XP grade includes an extreme pressure additive Molybdenum Sulfide (MoS) and has a viscosity of 233 cSt @20°C.

Krytox™ L-100XP Grease linear perfluoropolyethers (PFPEs) provide exceptional low volatility characteristics for longer lubricant life. Krytox™ L-100XP grade has a viscosity of 233 cSt @20°C Krytox™ L-100XP is a Black grease that contains molybdenum disulfide added as an extreme pressure additive for highly loaded gears and bearings. NLGI Grade: 2 Food Contact Approval: None Useful Temperature Range, °C: –67 to 290 Base Oil Viscosity cSt @40°C: 100 Oil Viscosity Index: 206 Vapor Pressure Torr @20°C: 1.5 x 10–8 Pour Point °C: -67°C Oil Density, g/mL, 24°C: 1.86 Krytox™ L-100XP Grease is compatible with most all materials commonly used in semiconductor environments, including metals, plastics, and elastomers. Krytox™ L-100XP Grease is safe for use around fuels and oxidizers and have excellent load-carrying capacity. Krytox™ L-100XP Grease is an excellent choice for use in high or ultra-high vacuum and aerospace environments where particulate generation is critical, or where high or extremely high temperatures exist. Surfaces to be lubricated with Krytox™ L-Series lubricants should be thoroughly cleaned before the grease is applied to remove organic rust inhibitors that could inhibit proper lubrication. These lubricants are extremely inert and will keep their lubricating properties, even after long periods of storage. Typical applications include all bearings, gears, valves, O-rings and any moving components, including robotics, in cleanroom and aerospace environments. Krytox™ L-Series linear greases are compatible with all plastic and metal components typically used in industrial applications.

Krytox™ L-15 G Grease

Krytox™ L-15 G Grease is a proprietary formulation based primarily on a perfluoropolytrimethyleneoxide with the same excellent thermal properties of Krytox™ and much improved temperature viscosity performance.

Krytox™ L-15 G Grease linear perfluoropolyethers (PFPEs) provides exceptional low volatility characteristics for longer lubricant life. The base oils have high viscosity indexes to provide effective lubrication over a wider temperature range. They have the excellent chemical and thermal stability of all Krytox™ products and are nonflammable and safe for use in oxygen and other harsh chemical environment NLGI Grade: 2 Food Contact Approval: None Useful Temperature Range, °C: –67 to 290 Base Oil Viscosity cSt @40°C: 100 Oil Viscosity Index: 206 Vapor Pressure Torr @20°C: 1.5 x 10–8 Pour Point °C: -67°C Oil Density, g/mL, 24°C: 1.86 Krytox™ L-15 G Grease is compatible with most materials including the most commonly used plastics and elastomers. It is safe for use around fuels and oxidizers and has excellent load carrying capacity. It is designed for performance in extreme vacuum or temperature conditions. Surfaces to be lubricated with Krytox™ L-Series lubricants should be thoroughly cleaned before the grease is applied to remove organic rust inhibitors that could inhibit proper lubrication. These lubricants are extremely inert and will keep their lubricating properties, even after long periods of storage. Typical applications include all bearings, gears, valves, O-rings and any moving components, including robotics, in cleanroom and aerospace environments. Krytox™ L-Series linear greases are compatible with all plastic and metal components typically used in industrial applications.

Krytox™ L-150 G Grease

Krytox™ L-150 G Grease linear perfluoropolyethers (PFPEs) provide exceptional low volatility characteristics designed for use in semiconductor and aerospace environments. Krytox™ L-150 G grade has a viscosity of 350 cSt @20°C.

Krytox™ L-150 G Grease linear perfluoropolyethers (PFPEs) provide exceptional low volatility characteristics for longer lubricant life. Krytox™ L-150 G grade includes a anti-corrosion additive and has a viscosity of 350 cSt @20°C NLGI Grade: 2 Food Contact Approval: None Useful Temperature Range, °C: –60 to 315 Base Oil Viscosity cSt @40°C: 150 Oil Viscosity Index: 212 Vapor Pressure Torr @20°C: 4 x 10–10 Pour Point °C: -60°C Oil Density, g/mL, 24°C: 1.87 Krytox™ L-150 G Grease is compatible with most all materials commonly used in semiconductor environments, including metals, plastics, and elastomers. Krytox™ L-150 G Grease is safe for use around fuels and oxidizers and have excellent load-carrying capacity. Krytox™ L-150 G Grease is an excellent choice for use in high or ultra-high vacuum and aerospace environments where particulate generation is critical, or where high or extremely high temperatures exist. Surfaces to be lubricated with Krytox™ L-Series lubricants should be thoroughly cleaned before the grease is applied to remove organic rust inhibitors that could inhibit proper lubrication. These lubricants are extremely inert and will keep their lubricating properties, even after long periods of storage. Typical applications include all bearings, gears, valves, O-rings and any moving components, including robotics, in cleanroom and aerospace environments. Krytox™ L-Series linear greases are compatible with all plastic and metal components typically used in industrial applications.

Krytox™ L-150 XP Grease

Krytox™ L-150XP Grease linear perfluoropolyethers (PFPEs) provide exceptional low volatility characteristics for longer lubricant life. Krytox™ L-150XP grade includes a extreme pressure additive Molybdenum Sulfide (MoS) and has a viscosity of 350 cSt @20°C.

Krytox™ L-150XP Grease linear perfluoropolyethers (PFPEs) provide exceptional low volatility characteristics for longer lubricant life. Krytox™ L-150XP grade has a viscosity of 350 cSt @20°C Krytox™ L-150XP is a Black grease that contains molybdenum disulfide added as an extreme pressure additive for highly loaded gears and bearings. NLGI Grade: 2 Food Contact Approval: None Useful Temperature Range, °C: –60 to 315 Base Oil Viscosity cSt @40°C: 150 Oil Viscosity Index: 212 Vapor Pressure Torr @20°C: 4 x 10–10 Pour Point °C: -60°C Oil Density, g/mL, 24°C: 1.87 Krytox™ L-150XP Grease is compatible with most all materials commonly used in semiconductor environments, including metals, plastics, and elastomers. Krytox™ L-150XP Grease is safe for use around fuels and oxidizers and have excellent load-carrying capacity. Krytox™ L-150XP Grease is an excellent choice for use in high or ultra-high vacuum and aerospace environments where particulate generation is critical, or where high or extremely high temperatures exist. Surfaces to be lubricated with Krytox™ L-Series lubricants should be thoroughly cleaned before the grease is applied to remove organic rust inhibitors that could inhibit proper lubrication. These lubricants are extremely inert and will keep their lubricating properties, even after long periods of storage. Typical applications include all bearings, gears, valves, O-rings and any moving components, including robotics, in cleanroom and aerospace environments. Krytox™ L-Series linear greases are compatible with all plastic and metal components typically used in industrial applications.

Krytox™ L-220 G Grease

Krytox™ L-220 G Grease linear perfluoropolyethers (PFPEs) provide exceptional low volatility characteristics designed for use in semiconductor and aerospace environments. Krytox™ L-220 G grade has a viscosity of 500 cSt @20°C.

Krytox™ L-220 G Grease linear perfluoropolyethers (PFPEs) provide exceptional low volatility characteristics for longer lubricant life. Krytox™ L-220 G grade has a viscosity of 500 cSt @20°C NLGI Grade: 2 Food Contact Approval: None Useful Temperature Range, °C: –60 to 315 Base Oil Viscosity cSt @40°C: 220 Oil Viscosity Index: 236 Vapor Pressure Torr @20°C: 6 x 10–11 Pour Point °C: -60°C Oil Density, g/mL, 24°C: 1.87 Krytox™ L-220 G Grease is compatible with most all materials commonly used in semiconductor environments, including metals, plastics, and elastomers. Krytox™ L-220 G Grease is safe for use around fuels and oxidizers and have excellent load-carrying capacity. Krytox™ L-220 G Grease is an excellent choice for use in high or ultra-high vacuum and aerospace environments where particulate generation is critical, or where high or extremely high temperatures exist. Surfaces to be lubricated with Krytox™ L-Series lubricants should be thoroughly cleaned before the grease is applied to remove organic rust inhibitors that could inhibit proper lubrication. These lubricants are extremely inert and will keep their lubricating properties, even after long periods of storage. Typical applications include all bearings, gears, valves, O-rings and any moving components, including robotics, in cleanroom and aerospace environments. Krytox™ L-Series linear greases are compatible with all plastic and metal components typically used in industrial applications.

Krytox™ LVP Grease

Krytox™ LVP is a high-vacuum grease.

Krytox™ LVP is high-vacuum grease performs over extremes of temperature and pressure and used as a highly reliable, low-friction lubricant in aerospace and other projects. It has a viscosity of 740 cSt @ 40 degrees C.

Krytox™ XHT-1000 Oil

Krytox™ XHT-1000 Oil is a special extreme high temperature grade oil with low evaporation and extra treatment to allow use at temperatures above the range of normal PFPE oils. Krytox™ XHT-1000 Oil has viscosity of 1023 cSt @40°C.

Krytox™ XHT-1000 Oil is a special extreme high temperature grade oil with low evaporation and extra treatment to allow use at temperatures above the range of normal perfluoropolyether (PFPE) oils. Krytox™ XHT-1000 Oil provides excellent lubrication over a broad temperature range. All Krytox™ XHT series oils are nonflammable and chemically inert. Food Contact Approval: None Base Oil Viscosity cSt @40°C: 1023 Oil Viscosity Index: 171 Pour Point °C: -5°C: Grease Density, g/ml @0°C: 1.95 Oil Volatility, % in 22 hr @260°C: 0.5 Vapor Pressure of base oil @20°C: 4 x 10–15 Krytox™ XHT-1000 Oil allows for extended lubrication intervals and longer equipment life. The oil can begin to slowly evaporate at temperatures above 360°C, and this will occur at an increasing rate as temperatures increase. Re-lubrication could be required at these temperatures to achieve optimum life. Due to their low surface tensions, Krytox™ oils easily wet metallic surfaces, and, because of their inertness, Krytox™ oils have little or no adverse effect on metals. Testing of metals at 340°C in the absence of air has shown little evidence of corrosion. In the presence of air, corrosion was slightly higher. The presence of molybdenum in the metals improved corrosion resistance.

Krytox™ XHT-500 Oil

Krytox™ XHT-500 Oil is a special extreme high temperature grade oil with low evaporation and extra treatment to allow use at temperatures above the range of normal PFPE oils. Krytox™ XHT-500 Oil has viscosity of 500 cSt @40°C.

Krytox™ XHT-500 Oil is a special extreme high temperature grade oil with low evaporation and extra treatment to allow use at temperatures above the range of normal perfluoropolyether (PFPE) oils. Krytox™ XHT-500 Oil provides excellent lubrication over a broad temperature range. All Krytox™ XHT series oils are nonflammable and chemically inert. Food Contact Approval: NSF H-1 Base Oil Viscosity cSt @40°C: 500 Oil Viscosity Index: 148 Pour Point °C: -25°C: Grease Density, g/ml @0°C: 1.95 Oil Volatility, % in 22 hr @260°C: 0.8 Vapor Pressure of base oil @20°C: 1 x 10–9 Estimated Useful Range, °C: -20 to 300 Krytox™ XHT-500 Oil allows for extended lubrication intervals and longer equipment life. The oil can begin to slowly evaporate at temperatures above 330 °C (626 °F), and this will occur at an increasing rate as temperatures increase. Re-lubrication could be required at these temperatures to achieve optimum life. Due to their low surface tensions, Krytox™ oils easily wet metallic surfaces, and, because of their inertness, Krytox™ oils have little or no adverse effect on metals. Testing of metals at 340 °C (644 °F) in the absence of air has shown little evidence of corrosion. In the presence of air, corrosion was slightly higher. The presence of molybdenum in the metals improved corrosion resistance.

Krytox™ XHT-750 Oil

Krytox™ XHT-750 Oil is a special extreme high temperature grade oil with low evaporation and extra treatment to allow use at temperatures above the range of normal PFPE oils. Krytox™ XHT-750 Oil has viscosity of 738 cSt @40°C.

Krytox™ XHT-750 Oil is a special extreme high temperature grade oil with low evaporation and extra treatment to allow use at temperatures above the range of normal perfluoropolyether (PFPE) oils. Krytox™ XHT-750 Oil provides excellent lubrication over a broad temperature range. All Krytox™ XHT series oils are nonflammable and chemically inert. Food Contact Approval: None Base Oil Viscosity cSt @40°C: 738 Oil Viscosity Index: 157 Pour Point °C: -15°C: Grease Density, g/ml @0°C: 1.95 Oil Volatility, % in 22 hr @260°C: 0.6 Vapor Pressure of base oil @20°C: 3 x 10–14 Estimated Useful Range, °C: -15 to 350 Krytox™ XHT-750 Oil allows for extended lubrication intervals and longer equipment life. The oil can begin to slowly evaporate at temperatures above 350°C, and this will occur at an increasing rate as temperatures increase. Re-lubrication could be required at these temperatures to achieve optimum life. With their low surface tensions, Krytox™ oils easily coat metallic surfaces, and, because of their inertness, Krytox™ oils have little or no adverse effect on metals. Testing of metals at 340°C in the absence of air has shown little evidence of corrosion. In the presence of air, corrosion was slightly higher. The presence of molybdenum in the metals improved corrosion resistance.

Krytox™ XHT-AC Grease

Krytox™ XHT-AC grease is a special high temperature grease with low oil evaporation that provides anti-wear and rusting protection, and is compatible with all elastomers and plastics.

Krytox™ XHT-AC grease is a special high temperature greases with low oil evaporation that provides anti-wear and rusting protection, and are compatible with all elastomers and plastics. Krytox™ XHT-AC grease has excellent lubrication over a broad temperature range, but is designed to work best at temperatures over 200°C (400 °F). The Krytox™ XHT-AC series grease is an extension of the Krytox™ 240 series and Krytox™ GPL 22X series, but designed to give higher performance in the 204–302°C (400–575°F) range. Estimated Useful Range °C: –20 to 300 Base Oil Viscosity, cSt @40°C: 500 Oil Viscosity Index: 149 Oil Pour Point °C: -25 Maximum Volatility in 22 hr, % @204 °C: <1 Appearance: White, creamy consistency Specific Gravity at 0°C: 1.99 Food Contact Approval: NSF H-1 Krytox™ XHT-AC grease provides extended lubrication intervals and longer equipment life. Krytox™ XHT-AC series grease contains sodium nitrite to offer anti-corrosion performance. The base oil is an extremely viscous oil that provides good viscosity and lower evaporation at high temperatures. Krytox™ XHT-AC series grease is nonflammable, oxygen-compatible, and chemically inert. • Paint plant conveyor bearings • Corrugator and paper machine bearings • Aluminum can manufacturing bearings • Welding machines • High temperature fans • Textile equipment • Tenter frames • High temperature ovens • Conveyor systems in glass and aluminum plants • Textile calender roll bearings • Brick kiln car bearings • Valve lubrication • Ventilation fan bearing grease • Rod mills

Krytox™ XHT-ACX Grease

Krytox™ XHT-ACX grease is a special high temperature grease with low oil evaporation that provides anti-wear and rusting protection, and is compatible with all elastomers and plastics. Krytox™ XHT-ACX grease is more viscous than Krytox™ XHT-AC grease or even more demanding applications.

Krytox™ XHT-ACX grease is a special high temperature greases with low oil evaporation that provides anti-wear and rusting protection, and are compatible with all elastomers and plastics. Krytox™ XHT-ACX grease is more viscous than Krytox™ XHT-AC grease. Krytox™ XHT-ACX grease has excellent lubrication over a broad temperature range, but is designed to work best at temperatures over 200°C (400 °F). The Krytox™ XHT-ACX series grease is an extension of the Krytox™ 240 series and Krytox™ GPL 22X series, but designed to give higher performance in the 204–302°C (400–575°F) range. Estimated Useful Range °C: –10 to 300 Base Oil Viscosity, cSt @40°C: 738 Oil Viscosity Index: 158 Oil Pour Point °C: -15 Maximum Volatility in 22 hr, % @204 °C: <0.75 Appearance: White, creamy consistency Specific Gravity at 0°C: 1.99 Food Contact Approval: NSF H-1 Krytox™ XHT-ACX grease provides extended lubrication intervals and longer equipment life. Krytox™ XHT-ACX series grease contains sodium nitrite to offer anti-corrosion performance. The base oil is an extremely viscous oil that provides good viscosity and lower evaporation at high temperatures. Krytox™ XHT-ACX series grease is nonflammable, oxygen-compatible, and chemically inert. • Paint plant conveyor bearings • Corrugator and paper machine bearings • Aluminum can manufacturing bearings • Welding machines • High temperature fans • Textile equipment • Tenter frames • High temperature ovens • Conveyor systems in glass and aluminum plants • Textile calender roll bearings • Brick kiln car bearings • Valve lubrication • Ventilation fan bearing grease • Rod mills

Krytox™ XHT-BD Grease

@40°C.

Krytox™ XHT-BD Grease is a special extreme high temperature grease with low oil evaporation, thickened with a non-melting additive to allow use at temperatures above the melting point of common greases. Krytox™ XHT-BD has a viscosity of 500 cSt...

Krytox™ XHT-BD series are special extreme high temperature greases with low oil evaporation. Krytox™ XHT-BD grease uses a special non-melting high temperature thickener. Krytox™ XHT-BD series greases are nonflammable and chemically inert. Krytox™ allows extended lubrication intervals and longer equipment life. Krytox™ XHT-BD greases are designed for use where the temperatures are in the 288°C (500°F) range and higher, where there is a danger of melting the standard PTFE thickener. The base oil is an extremely viscous oil that provides good viscosity and lower evaporation at high temperatures. Estimated Useful Range °C: –20 to 300 (with spikes to 330) Oil Pour Point °C: -25 Base Oil Viscosity, cSt @40°C: 500 Oil Separation in 30 hr at 99°C: 6 Oil Volatility in 22 hr, % @260°C: 2.1 Appearance: White, creamy consistency Specific Gravity at 0°C: 2.00 NLGI Grade: 1.5 Krytox™ XHT-BD Grease have excellent lubrication over a broad temperature range. Due to their low surface tensions, Krytox™ base oils easily wet metallic surfaces. Because of their inertness, Krytox™ base oils have little or no adverse effect on metals. Testing of metals at 340°C (644°F) in the absence of air has shown little evidence of corrosion. The presence of molybdenum in the metals improves corrosion resistance further. Krytox™ XHT-BD greases are for use in low speed bearings or in pillow housings and will shear at high speeds, causing loss of oil in sealed bearings. The oil in the grease can begin to slowly evaporate at temperatures above 330 °C (626 °F), and this will occur at an increasing rate as temperatures increase. Re-lubrication could be required at these temperatures to achieve optimum life.

Krytox™ XHT-BDX Grease

@40°C, higher that Krytox™ XHT-BD Grease.

Krytox™ XHT-BDX Grease is a special extreme high temperature grease with low oil evaporation, thickened with a non-melting additive to allow use at temperatures above the melting point of common greases. Krytox™ XHT-BDX has a viscosity of 738 cSt...

Krytox™ XHT-BD series are special extreme high temperature greases with low oil evaporation. Krytox™ XHT-BDX grease uses a special non-melting high temperature thickener. Krytox™ XHT-BD series greases are nonflammable and chemically inert. Krytox™ allows extended lubrication intervals and longer equipment life. Krytox™ XHT-BD greases are designed for use where the temperatures are in the 288°C (500°F) range and higher, where there is a danger of melting the standard PTFE thickener. The base oil is an extremely viscous oil that provides good viscosity and lower evaporation at high temperatures. Estimated Useful Range °C: –15 to 350 (with spikes to 400) Oil Pour Point °C: -20 Base Oil Viscosity, cSt @40°C: 738 Oil Separation in 30 hr at 99°C: 5 Oil Volatility in 22 hr, % @260°C: 1.5 Appearance: White, creamy consistency Specific Gravity at 0°C: 2.00 NLGI Grade: 1.5 Krytox™ XHT-BDX Grease has excellent lubrication over a broad temperature range. Due to their low surface tensions, Krytox™ base oils easily wet metallic surfaces. Because of their inertness, Krytox™ base oils have little or no adverse effect on metals. Testing of metals at 340°C (644°F) in the absence of air has shown little evidence of corrosion. The presence of molybdenum in the metals improves corrosion resistance further. Krytox™ XHT-BDX grease is typically for use in low speed bearings or in pillow housings and will shear at high speeds, causing loss of oil in sealed bearings. The oil in the grease can begin to slowly evaporate at temperatures above 350°C (626°F), and this will occur at an increasing rate as temperatures increase. It can withstand intermittent spikes up to 400°C (752°F). Re-lubrication could be required at these temperatures to achieve optimum life.

Krytox™ XHT-BDZ Grease

@40°C, highest performance in the Krytox™ XHT-BD series.

Krytox™ XHT-BDZ Grease is a special extreme high temperature grease with low oil evaporation, thickened with a non-melting additive allowing use at temperatures above the melting point of most common greases. Krytox™ XHT-BD has a viscosity of 1023 cSt...

Krytox™ XHT-BD series are special extreme high temperature greases with low oil evaporation. Krytox™ XHT-BDZ grease uses a special non-melting high temperature thickener. Krytox™ XHT-BD series greases are nonflammable and chemically inert. Krytox™ allows extended lubrication intervals and longer equipment life. Krytox™ XHT-BDZ greases are designed for use where the temperatures are in the 288°C (500°F) range and higher, where there is a danger of melting the standard PTFE thickener. The base oil is the most viscous oil in the Krytox™ XHT-BD series providing good viscosity and lower evaporation at high temperatures. Estimated Useful Range °C: –5 to 360 (with spikes to >400) Oil Pour Point °C: -15 Base Oil Viscosity, cSt @40°C: 1023 Oil Separation in 30 hr at 99°C: 5 Oil Volatility in 22 hr, % @260°C: 1.1 Appearance: White, creamy consistency Specific Gravity at 0°C: 2.00 NLGI Grade: 1.5 Krytox™ XHT-BDZ Grease has excellent lubrication over a broad temperature range. Due to their low surface tensions, Krytox™ base oils easily wet metallic surfaces. Because of their inertness, Krytox™ base oils have little or no adverse effect on metals. Testing of metals at 340°C (644°F) in the absence of air has shown little evidence of corrosion. The presence of molybdenum in the metals improves corrosion resistance further. Krytox™ XHT-BD greases are for use in low speed bearings or in pillow housings and will shear at high speeds, causing loss of oil in sealed bearings. The oil in the grease can begin to slowly evaporate at temperatures above 360 °C (680°F), and this will occur at an increasing rate as temperatures increase. It can withstand intermittent spikes up to and above 400°C (752°F). Re-lubrication could be required at these temperatures to achieve optimum life.

Krytox™ XHT-EP298 Grease

Krytox™ XHT-EP298 Grease has been formulated for high-temperature applications that need both high load carrying capacity and anti-corrosion protection. Krytox™ XHT-EP298 Grease operates best under 294°C.

Krytox™ XHT-EP298 Grease has been formulated for high-temperature applications that need both high load carrying capacity and anti-corrosion protection. Typical applications include conveyor chains that are subjected to moist conditions or frequent temperature cycling that could allow condensation and rusting to occur. Krytox™ XHT-EP298 Grease has a viscosity of 2560 cSt @20°C. ISO Grade: 680 Estimated Useful Range: -15°C to 294°C Oil Viscosity @40°C: 738 Oil Viscosity Index: 158 Oil Pour Point: -15°C Food Grade Compatible (H1): No NLGI Grade: 2 Additives: High Pressure and Anti-Corrosion Krytox™ XHT-EP298 Grease combines both anti corrosion and extreme pressure additives for the most demanding applications in the higher temperature range. In testing, the 29X series shows improvement in load carrying and wear prevention over standard Krytox™ greases. Best choice for wet or temperature variable conditions that allows for condensation leading to rusting.

Krytox™ XHT-EP299 Grease

Krytox™ XHT-EP299 Grease has been formulated for high-temperature applications that need both high load carrying capacity and anti-corrosion protection. Krytox™ XHT-EP299 Grease operates best under 300°C.

Krytox™ XHT-EP299 Grease has been formulated for high-temperature applications that need both high load carrying capacity and anti-corrosion protection. Typical applications include conveyor chains that are subjected to moist conditions or frequent temperature cycling that could allow condensation and rusting to occur. Krytox™ XHT-EP299 Grease has a viscosity of 3500 cSt @20°C. ISO Grade: 1000 Estimated Useful Range: -5°C to 300°C Oil Viscosity @40°C: 1005 Oil Viscosity Index: 179 Oil Pour Point: -5°C Food Grade Compatible (H1): No NLGI Grade: 2 Additives: High Pressure and Anti-Corrosion Krytox™ XHT-EP299 Grease combines both anti corrosion and extreme pressure additives for the most demanding applications in the higher temperature range. In testing, the 29X series shows improvement in load carrying and wear prevention over standard Krytox™ greases. Best choice for wet or temperature variable conditions that allows for condensation leading to rusting.

Krytox™ XHT-S Grease

Krytox™ XHT-S Grease is high temperature grease with low oil evaporation that provides long bearing life and is compatible with all elastomers and plastics. Krytox™ XHT-S Grease has a viscosity of 500 cSt @40°C.

Krytox™ XHT-S greases are special high temperature greases with low oil evaporation that provide long bearing life and are compatible with most elastomers and plastics. Krytox™ XHT-S greases provide excellent lubrication over a broad temperature range, and are mainly designed to work best at temperatures over 200°C (400°F). The Krytox™ XHT-S series greases are an extension of the Krytox™ GPL 240 series and Krytox™ GPL 20X series, designed to give higher performance in the 204–302°C (400–575°F) range. Krytox™ XHT-S series greases should be used below 320°C (608°F), where the polytetrafluoroethylene (PTFE) thickener could begin to melt. The base oil is an extremely viscous oil that provides good viscosity and lower evaporation at high temperatures. Krytox™ XHT-S series greases contain no additives, so they are used when a potential for interaction between process chemicals and grease additives exists. Krytox™ grease is made to a standard NLGI grade 2, with PTFE as the standard thickener. Estimated Useful Range °C: –20 to 300 Base Oil Viscosity, cSt @40°C: 500 Oil Viscosity Index: 149 Oil Pour Point °C: -25 Oil Volatility in 22 hr, % @260°C: <1 Appearance: White, creamy consistency Specific Gravity at 0°C: 1.99 NLGI Grade: 2 Food Contact Approval: None Applications for Krytox™ XHT-S lubricants are generally of a critical nature, such as when temperatures reach extremes that conventional lubricants cannot handle. Krytox™ XHT-S grease is expected to be durable in highly aggressive environments. Krytox™ XHT-S series greases are nonflammable, oxygen compatible, chemically inert, and provide extended lubrication intervals and longer equipment life. • Paint plant conveyor bearings • Corrugator and paper machine bearings • Aluminum can manufacturing bearings • Welding machines • High temperature fans • Textile equipment • Tenter frames • High temperature ovens • Conveyor systems in glass and aluminum plants • Textile calender roll bearings • Brick kiln car bearings • Valve lubrication • Ventilation fan bearing grease • Rod mills • Valves

Krytox™ XHT-SX Grease

Krytox™ XHT-SX Grease is high temperature grease with low oil evaporation that provides long bearing life and is compatible with all elastomers and plastics. Krytox™ XHT-SX Grease has a viscosity of 738 cSt @40°C, higher than Krytox™ XHT-S.

Krytox™ XHT-SX greases are special high temperature greases with low oil evaporation that provide long bearing life and are compatible with most elastomers and plastics. Krytox™ XHT-SX greases provide excellent lubrication over a broad temperature range, and are mainly designed to work best at temperatures over 200°C (400°F). The Krytox™ XHT-SX series greases are an extension of the Krytox™ GPL 240 series and Krytox™ GPL 20X series, designed to give higher performance in the 204–302°C (400–575°F) range. Krytox™ XHT-S(X) series greases should be used below 320°C (608°F), where the polytetrafluoroethylene (PTFE) thickener could begin to melt. The base oil is an extremely viscous oil that provides good viscosity and lower evaporation at high temperatures. Krytox™ XHT-S(X) series greases contain no additives, so they are used when a potential for interaction between process chemicals and grease additives exists. Krytox™ XHT-SX Grease is made to a standard NLGI grade 2, with PTFE as the standard thickener. Estimated Useful Range °C: –10 to 300 Base Oil Viscosity, cSt @40°C: 738 Oil Viscosity Index: 158 Oil Pour Point °C: -15 Oil Volatility in 22 hr, % @260°C: <0.75 Appearance: White, creamy consistency Specific Gravity at 0°C: 1.99 Food Contact Approval: NSF H-1 NLGI Grade: 2 Applications for Krytox™ XHT-SX lubricants are generally of a critical nature, such as when temperatures reach extremes that conventional lubricants cannot handle. Krytox™ XHT-SX grease is expected to perform well in highly aggressive environments. Krytox™ XHT-S(X) series greases are nonflammable, oxygen compatible, chemically inert, and provide extended lubrication intervals and longer equipment life. • Paint plant conveyor bearings • Corrugator and paper machine bearings • Aluminum can manufacturing bearings • Welding machines • High temperature fans • Textile equipment • Tenter frames • High temperature ovens • Conveyor systems in glass and aluminum plants • Textile calender roll bearings • Brick kiln car bearings • Valve lubrication • Ventilation fan bearing grease • Rod mills • Valves

Krytox™ XP-1A1 Oil

Krytox™ XP-1A1 Oil products, formulated with soluble additives, are high-quality, ultra high performance, anti-friction and anti-rust lubricants. Krytox™ XP-1A1 Oil for extreme pressure performance has viscosity of 8 cSt @40°C.

Krytox™ XP-1A1 Oil products are formulated using patented soluble additives. In the past, there were no additives available for the oil, because of the inertness of the oil and insolubility of available additives. The soluble additive won’t be washed away. These patented additives enhance the performance of Krytox™ PFPE greases and oils, giving them improved performance properties. Krytox™ XP-1A1 Oil products will hold up under tremendous load conditions, preventing metal-to-metal contact and thereby reducing wear. The long-term anti-rust properties repel moisture, providing extra protection against corrosion of metal parts and bearing surfaces. ISO Grade of Base Oil: 7 Estimated Useful Temperature Range, °C: –70 to 104 Base Oil Viscosity cSt @40°C: 8 Oil Viscosity Index: N/A Pour Point °C: -70°C Food Contact Approval: None Krytox™ XP-1A1 oil will extend bearing and component life. The anti-corrosion protection of the additive will reduce rusting, and allow longer grease and bearing life. The extreme pressure additive protect bearings under high loads. Bearings run quieter and wear less, because there are no solid additives to make noise. This product also demonstrates excellent resistance to water washout when used in wet environments. While Krytox™ XP-1A1 oils are inert and non-reactive to all elastomers, plastics, and metals, the soluble additives in Krytox™ lubricant XP products have not been tested with all materials. When in doubt, please contact your sales representative.

Krytox™ XP-1A2 Oil

Krytox™ XP-1A2 Oil products, formulated with soluble additives, are high-quality, ultra high performance, anti-friction and anti-rust lubricants. Krytox™ XP-1A2 Oil for extreme pressure performance has viscosity of 15 cSt @40°C.

Krytox™ XP-1A2 Oil products are formulated using patented soluble additives. In the past, there were no additives available for the oil, because of the inertness of the oil and insolubility of available additives. The soluble additive won’t be washed away. These patented additives enhance the performance of Krytox™ PFPE greases and oils, giving them improved performance properties. Krytox™ XP-1A2 Oil products will hold up under tremendous load conditions, preventing metal-to-metal contact and thereby reducing wear. The long-term anti-rust properties repel moisture, providing extra protection against corrosion of metal parts and bearing surfaces. ISO Grade of Base Oil: 15 Estimated Useful Temperature Range, °C: –63 to 132 Base Oil Viscosity cSt @40°C: 15 Oil Viscosity Index: 59 Pour Point °C: -63°C Food Contact Approval: None Krytox™ XP-1A2 oil will extend bearing and component life. The anti-corrosion protection of the additive will reduce rusting, and allow longer grease and bearing life. The extreme pressure additive protect bearings under high loads. Bearings run quieter and wear less, because there are no solid additives to make noise. This product also demonstrates excellent resistance to water washout when used in wet environments. While Krytox™ XP-1A2 oils are inert and non-reactive to all elastomers, plastics, and metals, the soluble additives in Krytox™ lubricant XP products have not been tested with all materials. When in doubt, please contact your sales representative.

Krytox™ XP-1A3 Oil

Krytox™ XP-1A3 Oil products, formulated with soluble additives, are high-quality, ultra high performance, anti-friction and anti-rust lubricants. Krytox™ XP-1A3 Oil for extreme pressure performance has viscosity of 30 cSt @40°C.

Krytox™ XP-1A3 Oil products are formulated using patented soluble additives. In the past, there were no additives available for the oil, because of the inertness of the oil and insolubility of available additives. The soluble additive won’t be washed away. These patented additives enhance the performance of Krytox™ PFPE greases and oils, giving them improved performance properties. Krytox™ XP-1A3 Oil products will hold up under tremendous load conditions, preventing metal-to-metal contact and thereby reducing wear. The long-term anti-rust properties repel moisture, providing extra protection against corrosion of metal parts and bearing surfaces. ISO Grade of Base Oil: 32 Estimated Useful Temperature Range, °C: –60 to 154 Base Oil Viscosity cSt @40°C: 30 Oil Viscosity Index: 121 Pour Point °C: -60°C Food Contact Approval: None Krytox™ XP-1A3 oil will extend bearing and component life. The anti-corrosion protection of the additive will reduce rusting, and allow longer grease and bearing life. The extreme pressure additive protect bearings under high loads. Bearings run quieter and wear less, because there are no solid additives to make noise. This product also demonstrates excellent resistance to water washout when used in wet environments. While Krytox™ XP-1A3 oils are inert and non-reactive to all elastomers, plastics, and metals, the soluble additives in Krytox™ lubricant XP products have not been tested with all materials. When in doubt, please contact your sales representative.

Krytox™ XP-1A4 Oil

Krytox™ XP-1A4 Oil products, formulated with soluble additives, are high-quality, ultra high performance, anti-friction and anti-rust lubricants. Krytox™ XP-1A4 Oil for extreme pressure performance has viscosity of 60 cSt @40°C.

Krytox™ XP-1A4 Oil products are formulated using patented soluble additives. In the past, there were no additives available for the oil, because of the inertness of the oil and insolubility of available additives. The soluble additive won’t be washed away. These patented additives enhance the performance of Krytox™ PFPE greases and oils, giving them improved performance properties. Krytox™ XP-1A4 Oil products will hold up under tremendous load conditions, preventing metal-to-metal contact and thereby reducing wear. The long-term anti-rust properties repel moisture, providing extra protection against corrosion of metal parts and bearing surfaces. ISO Grade of Base Oil: 68 Estimated Useful Temperature Range, °C: –51 to 179 Base Oil Viscosity cSt @40°C: 60 Oil Viscosity Index: 124 Pour Point °C: -36°C Food Contact Approval: None Krytox™ XP-1A4 oil will extend bearing and component life. The anti-corrosion protection of the additive will reduce rusting, and allow longer grease and bearing life. The extreme pressure additive protect bearings under high loads. Bearings run quieter and wear less, because there are no solid additives to make noise. This product also demonstrates excellent resistance to water washout when used in wet environments. While Krytox™ XP-1A4 oils are inert and non-reactive to all elastomers, plastics, and metals, the soluble additives in Krytox™ lubricant XP products have not been tested with all materials. When in doubt, please contact your sales representative.

Krytox™ XP-1A5 Oil

Krytox™ XP-1A5 Oil products, formulated with soluble additives, are high-quality, ultra high performance, anti-friction and anti-rust lubricants. Krytox™ XP-1A5 Oil for extreme pressure performance has viscosity of 160 cSt @40°C. Krytox™ XP-1A5 Oil products have Food Contact Approval: NSF H-1.

Krytox™ XP-1A5 Oil products are formulated using patented soluble additives. In the past, there were no additives available for the oil, because of the inertness of the oil and insolubility of available additives. The soluble additive won’t be washed away. These patented additives enhance the performance of Krytox™ PFPE greases and oils, giving them improved performance properties. Krytox™ XP-1A5 Oil products will hold up under tremendous load conditions, preventing metal-to-metal contact and thereby reducing wear. The long-term anti-rust properties repel moisture, providing extra protection against corrosion of metal parts and bearing surfaces. Krytox™ XP-1A5 Oil products have Food Contact Approval: NSF H-1 ISO Grade of Base Oil: 150 Estimated Useful Temperature Range, °C: –36 to 182 Base Oil Viscosity cSt @40°C: 160 Oil Viscosity Index: 134 Pour Point °C: -36°C Food Contact Approval: NSF H-1 Krytox™ XP-1A5 oil will extend bearing and component life. The anti-corrosion protection of the additive will reduce rusting, and allow longer grease and bearing life. The extreme pressure additive protect bearings under high loads. Bearings run quieter and wear less, because there are no solid additives to make noise. This product also demonstrates excellent resistance to water washout when used in wet environments. While Krytox™ XP-1A5 oils are inert and non-reactive to all elastomers, plastics, and metals, the soluble additives in Krytox™ lubricant XP products have not been tested with all materials. When in doubt, please contact your sales representative.

Krytox™ XP-1A6 Oil

Krytox™ XP-1A6 Oil products, formulated with soluble additives, are high-quality, ultra high performance, anti-friction and anti-rust lubricants. Krytox™ XP-1A6 Oil for extreme pressure performance has viscosity of 240 cSt @40°C.

Krytox™ XP-1A6 Oil products are formulated using patented soluble additives. In the past, there were no additives available for the oil, because of the inertness of the oil and insolubility of available additives. The soluble additive won’t be washed away. These patented additives enhance the performance of Krytox™ PFPE greases and oils, giving them improved performance properties. Krytox™ XP-1A6 Oil products will hold up under tremendous load conditions, preventing metal-to-metal contact and thereby reducing wear. The long-term anti-rust properties repel moisture, providing extra protection against corrosion of metal parts and bearing surfaces. ISO Grade of Base Oil: 220 Estimated Useful Temperature Range, °C: –36 to 182 Base Oil Viscosity cSt @40°C: 240 Oil Viscosity Index: 134 Pour Point °C: -36°C Food Contact Approval: None Krytox™ XP-1A6 oil will extend bearing and component life. The anti-corrosion protection of the additive will reduce rusting, and allow longer grease and bearing life. The extreme pressure additive protect bearings under high loads. Bearings run quieter and wear less, because there are no solid additives to make noise. This product also demonstrates excellent resistance to water washout when used in wet environments. While Krytox™ XP-1A6 oils are inert and non-reactive to all elastomers, plastics, and metals, the soluble additives in Krytox™ lubricant XP products have not been tested with all materials. When in doubt, please contact your sales representative.

Krytox™ XP-1A7 Oil

Krytox™ XP-1A7 Oil products, formulated with soluble additives, are high-quality, ultra high performance, anti-friction and anti-rust lubricants. Krytox™ XP-1A7 Oil for extreme pressure performance has viscosity of 440 cSt @40°C.

Krytox™ XP-1A7 Oil products are formulated using patented soluble additives. In the past, there were no additives available for the oil, because of the inertness of the oil and insolubility of available additives. The soluble additive won’t be washed away. These patented additives enhance the performance of Krytox™ PFPE greases and oils, giving them improved performance properties. Krytox™ XP-1A7 Oil products will hold up under tremendous load conditions, preventing metal-to-metal contact and thereby reducing wear. The long-term anti-rust properties repel moisture, providing extra protection against corrosion of metal parts and bearing surfaces. ISO Grade of Base Oil: 460 Estimated Useful Temperature Range, °C: –30 to 182 Base Oil Viscosity cSt @40°C: 440 Oil Viscosity Index: 155 Pour Point °C: -30°C Food Contact Approval: None Krytox™ XP-1A7 oil will extend bearing and component life. The anti-corrosion protection of the additive will reduce rusting, and allow longer grease and bearing life. The extreme pressure additive protect bearings under high loads. Bearings run quieter and wear less, because there are no solid additives to make noise. This product also demonstrates excellent resistance to water washout when used in wet environments. While Krytox™ XP-1A7 oils are inert and non-reactive to all elastomers, plastics, and metals, the soluble additives in Krytox™ lubricant XP products have not been tested with all materials. When in doubt, please contact your sales representative.

Krytox™ XP-2A1 Grease

Krytox™ XP-2A1 Grease products, formulated with soluble additives, are high-quality, ultra high performance, anti-friction and anti-rust lubricants. Krytox™ XP-2A1 Grease for extreme pressure performance has base oil viscosity of 8 cSt @40°C.

Krytox™ XP-2A1 Grease products are formulated using patented soluble additives. In the past, there were no additives available for the oil, because of the inertness of the oil and insolubility of available additives. The soluble additive won’t be washed away. These patented additives enhance the performance of Krytox™ PFPE greases and oils, giving them improved performance properties. Krytox™ XP-2A1 Grease products will hold up under tremendous load conditions, preventing metal-to-metal contact and thereby reducing wear. The long-term anti-rust properties repel moisture, providing extra protection against corrosion of metal parts and bearing surfaces. NLGI Grade: 2 Food Contact Approval: None ISO Grade of Base Oil: 7 Estimated Useful Temperature Range, °C: –70 to 104 Base Oil Viscosity cSt @40°C: 8 Oil Viscosity Index: N/A Pour Point °C: -70°C Krytox™ XP-2A1 Grease will extend bearing and component life. The anti-corrosion protection of the additive will reduce rusting, and allow longer grease and bearing life. The extreme pressure additive protect bearings under high loads. Bearings run quieter and wear less, because there are no solid additives to make noise. This product also demonstrates excellent resistance to water washout when used in wet environments. Krytox™ XP-2A1 Grease base oils are inert and non-reactive to all elastomers, plastics, and metals, the soluble additives in Krytox™ lubricant XP products have not been tested with all materials. When in doubt, please contact your sales representative.

Krytox™ XP-2A2 Grease

Krytox™ XP-2A2 Grease products, formulated with soluble additives, are high-quality, ultra high performance, anti-friction and anti-rust lubricants. Krytox™ XP-2A2 Grease for extreme pressure performance has base oil viscosity of 15 cSt @40°C.

Krytox™ XP-2A2 Grease products are formulated using patented soluble additives. In the past, there were no additives available for the oil, because of the inertness of the oil and insolubility of available additives. The soluble additive won’t be washed away. These patented additives enhance the performance of Krytox™ PFPE greases and oils, giving them improved performance properties. Krytox™ XP-2A2 Grease products will hold up under tremendous load conditions, preventing metal-to-metal contact and thereby reducing wear. The long-term anti-rust properties repel moisture, providing extra protection against corrosion of metal parts and bearing surfaces. NLGI Grade: 2 Food Contact Approval: None ISO Grade of Base Oil: 15 Estimated Useful Temperature Range, °C: –63 to 132 Base Oil Viscosity cSt @40°C: 15 Oil Viscosity Index: 59 Pour Point °C: -63°C Krytox™ XP-2A2 Grease will extend bearing and component life. The anti-corrosion protection of the additive will reduce rusting, and allow longer grease and bearing life. The extreme pressure additive protect bearings under high loads. Bearings run quieter and wear less, because there are no solid additives to make noise. This product also demonstrates excellent resistance to water washout when used in wet environments. Krytox™ XP-2A2 Grease are inert and non-reactive to all elastomers, plastics, and metals, the soluble additives in Krytox™ lubricant XP products have not been tested with all materials. When in doubt, please contact your sales representative.

Krytox™ XP-2A4 Grease

Krytox™ XP-2A4 Grease products, formulated with soluble additives, are high-quality, ultra high performance, anti-friction and anti-rust lubricants. Krytox™ XP-2A4 Grease for extreme pressure performance has base oil viscosity of 60 cSt @40°C.

Krytox™ XP-2A4 Grease products are formulated using patented soluble additives. In the past, there were no additives available for the oil, because of the inertness of the oil and insolubility of available additives. The soluble additive won’t be washed away. These patented additives enhance the performance of Krytox™ PFPE greases and oils, giving them improved performance properties. Krytox™ XP-2A4 Grease products will hold up under tremendous load conditions, preventing metal-to-metal contact and thereby reducing wear. The long-term anti-rust properties repel moisture, providing extra protection against corrosion of metal parts and bearing surfaces. NLGI Grade: 2 Food Contact Approval: None ISO Grade of Base Oil: 68 Estimated Useful Temperature Range, °C: –51 to 179 Base Oil Viscosity cSt @40°C: 60 Oil Viscosity Index: 124 Pour Point °C: -36°C Krytox™ XP-2A4 Grease will extend bearing and component life. The anti-corrosion protection of the additive will reduce rusting, and allow longer grease and bearing life. The extreme pressure additive protect bearings under high loads. Bearings run quieter and wear less, because there are no solid additives to make noise. This product also demonstrates excellent resistance to water washout when used in wet environments. Krytox™ XP-2A4 Grease base oils are inert and non-reactive to all elastomers, plastics, and metals, the soluble additives in Krytox™ lubricant XP products have not been tested with all materials. When in doubt, please contact your sales representative.

Krytox™ XP-2A5 Grease

H-1.

Krytox™ XP-2A5 Grease products, formulated with soluble additives, are high-quality, ultra high performance, anti-friction and anti-rust lubricants. Krytox™ XP-2A5 Grease for extreme pressure performance has base oil viscosity of 160 cSt @40°C. Krytox™ XP-2A5 Grease products have Food Contact Approval: NSF...

Krytox™ XP-2A5 Grease products are formulated using patented soluble additives. In the past, there were no additives available for the oil, because of the inertness of the oil and insolubility of available additives. The soluble additive won’t be washed away. These patented additives enhance the performance of Krytox™ PFPE greases and oils, giving them improved performance properties. Krytox™ XP-2A5 Grease products will hold up under tremendous load conditions, preventing metal-to-metal contact and thereby reducing wear. The long-term anti-rust properties repel moisture, providing extra protection against corrosion of metal parts and bearing surfaces. Krytox™ XP-1A5 Oil products have Food Contact Approval: NSF H-1 Krytox™ XP-2A5 Grease oil will extend bearing and component life. The anti-corrosion protection of the additive will reduce rusting, and allow longer grease and bearing life. The extreme pressure additive protect bearings under high loads. Bearings run quieter and wear less, because there are no solid additives to make noise. This product also demonstrates excellent resistance to water washout when used in wet environments. Krytox™ XP-2A5 Grease products are formulated using patented soluble additives. In the past, there were no additives available for the oil, because of the inertness of the oil and insolubility of available additives. The soluble additive won’t be washed away. These patented additives enhance the performance of Krytox™ PFPE greases and oils, giving them improved performance properties. Krytox™ XP-2A5 Grease products will hold up under tremendous load conditions, preventing metal-to-metal contact and thereby reducing wear. The long-term anti-rust properties repel moisture, providing extra protection against corrosion of metal parts and bearing surfaces. Krytox™ XP-2A5 Grease products have Food Contact Approval: NSF H-1 Krytox™ XP-2A5 Grease base oils are inert and non-reactive to all elastomers, plastics, and metals, the soluble additives in Krytox™ lubricant XP products have not been tested with all materials. When in doubt, please contact your sales representative.

Krytox™ XP-2A7 Grease

Krytox™ XP-2A7 Grease products, formulated with soluble additives, are high-quality, ultra high performance, anti-friction and anti-rust lubricants. Krytox™ XP-2A7 Grease for extreme pressure performance has base oil viscosity of 440 cSt @40°C.

Krytox™ XP-2A7 Grease products are formulated using patented soluble additives. In the past, there were no additives available for the oil, because of the inertness of the oil and insolubility of available additives. The soluble additive won’t be washed away. These patented additives enhance the performance of Krytox™ PFPE greases and oils, giving them improved performance properties. Krytox™ XP-2A7 Grease products will hold up under tremendous load conditions, preventing metal-to-metal contact and thereby reducing wear. The long-term anti-rust properties repel moisture, providing extra protection against corrosion of metal parts and bearing surfaces. NLGI Grade: 2 Food Contact Approval: None ISO Grade of Base Oil: 460 Estimated Useful Temperature Range, °C: –30 to 182 Base Oil Viscosity cSt @40°C: 440 Oil Viscosity Index: 155 Pour Point °C: -30°C Krytox™ XP-2A7 Grease will extend bearing and component life. The anti-corrosion protection of the additive will reduce rusting, and allow longer grease and bearing life. The extreme pressure additive protect bearings under high loads. Bearings run quieter and wear less, because there are no solid additives to make noise. This product also demonstrates excellent resistance to water washout when used in wet environments. Krytox™ XP-2A7 Grease base oils are inert and non-reactive to all elastomers, plastics, and metals, the soluble additives in Krytox™ lubricant XP products have not been tested with all materials. When in doubt, please contact your sales representative.

Krytox™ XP-2C5 Grease

Krytox™ XP-2C5 Grease features long life, high temperature stability, resistance to separation under centrifugal load. Krytox™ XP-2C5 Grease base oil has viscosity of 160 cSt.

Krytox™ XP-2C5 Grease contains an oil soluble additive that is effective at preventing corrosion and reducing wear. It also contains an extreme pressure additive - a micro powder boron nitride. NLGI Grade: 2 Food Contact Approval: None Specific Gravity @0°C: 2.00 Estimated Useful Temperature Range, °C: –36 to 204 Base Oil Viscosity cSt @40°C: 160 Appearance: White, Creamy Oil separation, wt% at 30 hr, 100°C: 4% Typical applications include those in potentially corrosive atmospheres, where vibration or shock loading may be significant and where an element will spend more time experiencing mixed film or boundary lubrication versus the desired full film or hydrodynamic lubrication.

Molykote™ 1122 Chain and Open Gear Grease

NLGI 2-3, Polyisobutylene based grease with inorganic thickener and adhesion improver additive offering high wear protection commonly used in the lubrication of chains.

A specialty grease used in the lubrication of chains with hollow pins. Works in a variety environments including high pressure, heavy wear, and moisture/water prone. Product Type: Grease Chemistry: Polyisobutene (PIB) Base Oil Viscosity: 1500 @ 40°C NLGI Grade: 2-3 Solid Lubricant: MoS2, graphite High Temp: 160°C Low Temp: 0°C Color: Black Hazmat: No Works for emergency lubrication Holds up under high pressure Good wear resistance Extreme adhesive capability Water resistant High load carrying ability Certified for NSF H2 Used in a variety of applications including: textiles, food sterilizers, and drying systems Used for initial lubrications as well as ongoing maintenance

Molykote™ 1122 Chain and Open Gear Grease (Aerosol)

The same as Molykote™ 1112 except that it is in aerosol form to promote easier application.

Created for applications that require an easy spray on application the aerosol form of 1122 is well suited to a variety of applications, particularly those that require H2 certification, operate at low speeds and high temperatures. Product Type: Dispersion & aerosol ; grease Chemistry: Polyisobutene (PIB) Base Oil Viscosity: 1500 @ 40°C NLGI Grade: 2-3 Solid Lubricant: MoS2, graphite High Temp: 160°C Low Temp: 0°C Color: Black Hazmat: Yes Works for emergency lubrication Holds up under high pressure Good wear resistance Extreme adhesive capability Water resistant Easy aerosol dispersion High load carrying ability Certified for NSF H2 - Used in a variety of applications including: textiles, food sterilizers, and drying systems - Used for initial lubrications as well as ongoing maintenance

Molykote™ C-40 High Temperature Chain Lubricant

A low viscosity polyalkylene glycol (PAG) based chain lubricant commonly used in high temperature chain and bearing applications.

A stable dispersion of graphite in a PAG fluid, Molykote™ C-40 is highly effective lubricant for chains and bearings that will be exposed to extremely high temperatures. When used properly it emits very little smoke or displeasing odors and both refrains from causing carbon build up as well as oftentimes softening hard carbonaceous deposits. Product Type: Dispersion & aerosol ; oil Chemistry: Polyalkylene Glycol (PAG) Base Oil Viscosity: 134 @ 40°C Solid Lubricant: Graphite High Temp: 538°C Low Temp: 177°C Color: Black Hazmat: No Extremely high temperature tolerance (177-538°C) Forms solid film after fluid evaporation Can soften existing carbon deposits Low smoke emission Low odor emission Does not cause carbon build up Application variety: manual or with automatic system Frequently used for chains and bearings in high temperature applications such as ovens, kilns, driers, and conveyors

Molykote™ Food Machinery Oil Spray

Multi functional mineral oil spray used for food processing equipment, pharmaceutical equipment, and similar industries or applications.

Developed for easy application, MOLYKOTE™ Food Machinery Oil Spray is a mineral oil based lubricant that includes a corrosion inhibitor as well as anti-wear additives. Product Type:Dispersion & aerosol ; oil Chemistry: Mineral oil Base Oil Viscosity: 96 @ 40°C ISO Grade: 100 Viscosity Index: 102 High Temp: 120°C Low Temp: -10°C Color: Clear to golden yellow Hazmat: Yes EP/AW additive package Approved for FDA 21 CRF 178.3570 H1 Certified for incidental food contact Tasteless and odorless Lubricant of mechanical components

Molykote™ G-0050 FM White EP Bearing Grease

NLGI Grade 0 mineral oil based grease with extreme pressure (EP) and anti-wear (AW) additives. Multi functional grease commonly used for mechanical components within food and beverage manufacturing & processing facilities.

A multi-functional lubricant with superior lubricating capabilities, Molykote™ G-0050 FM meets several food certifications including it approval for incidental food contact. With resistance to water washout and white color it is well suited for a myriad of applications within food and beverage processing facilities, especially those that require products to be free of black particle contamination. Product Type: Grease Chemistry: Mineral oil Base Oil Viscosity: 70 @ 40°C NLGI Grade: 0 Thickener: Aluminum complex Solid Lubricant: White solids High Temp: 149°C Low Temp: -29°C Color: White Hazmat: Yes Food Certifications: NSF H1; Kosher; FDA 21 CFR 178.3570 Appropriate for many plastics and elastomers White color Extreme pressure additives Created for use in food and beverage processing and manufacturing.

Molykote™ G-0051 FM White EP Bearing Grease

The same as Molykote™ G-0050 except that it is NLGI 1.

Provides the same multi-purpose uses a Molykote™ G-0051 but created for users and applications that require NLGI 1. Meets certification standards for many food and beverage codes including approval for incidental food contact. Resistance to water washout and white color makes it ideal for product that are required to be free of black particle contamination. Product Type: Grease Chemistry: Mineral oil Base Oil Viscosity: 70 @ 40°C NLGI Grade: 1 Thickener: Aluminum complex High Temp: 149°C Low Temp: -20°C Color: White Hazmat: Yes Food Certifications: NSF H1; Kosher; FDA 21 CFR 178.3570 Suited for many plastics and elastomers White color Extreme pressure additives Created for use in food and beverage processing and manufacturing

Molykote™ G-0052 FM White EP Bearing Grease

The same as Molykote™ G-0050 except that it is NLGI 2.

Provides the same multi-purpose uses a Molykote™ G-0051 but created for users and applications that require NLGI 2. Meets certification standards for many food and beverage codes including approval for incidental food contact. Resistance to water washout and white color makes it ideal for product that are required to be free of black particle contamination. Product Type: Grease Chemistry: Mineral oil Base Oil Viscosity: 115 @ 40°C NLGI Grade: 2 Thickener: Aluminum complex Solid Lubricant: White solids High Temp: 149°C Low Temp: -29°C Color: White Hazmat: Yes Food Certifications: NSF H1; Kosher; FDA 21 CFR 178.3570 Suited for many plastics and elastomers White color Extreme pressure additives Water washout resistance High load carrying capacity Created for use in food and beverage processing and manufacturing

Molykote™ G-1502FM Synthetic Bearing & Gear Grease

NLGI Grade 2 PAO based grease with aluminum complex thickener offering superior resistance to water wash off and commonly used in applications where grease sling-off is unacceptable.

With a fully synthetic base oil, water resistance, and multiple food grade approvals including incidental food contact, Molykote™ G-1502 is ideal for food and beverage applications where a tacky grease is favored. Product Type:Grease Chemistry: Polyalphaolefin (PAO) Base Oil Viscosity: 220 @ 40°C NLGI Grade: 2 Thickener: Aluminum Complex Solid Lubricant: White Solids High Temp: 149°C Low Temp: -40°C Color: White Hazmat: No Food and beverage certifications: - NSF H1 - FDA 21 CFR 178.3570 High oxidation resistance Corrosion protection High load carrying capacity Long service life Compatible with multiple substrates including plastic and rubber Water resistance and spray off resistant Used in applications where a tacky grease is needed such as cams, open gear, and sprokets

Molykote™ G-4500FM Multi-Purpose Synthetic Grease

NLGI Grade 2 - PAO based grease with aluminum complex thickener. Offering incidental food contact certification and commonly used in used for food processing equipment.

General purpose grease that is H1 certified for incidental food contact and meets FDA Regulation 21 CFR 178.3570. White in color with a light consistency, G-4500FM is compatible with many plastics and elastomers. Product Type: Grease Chemistry: Polyalphaolefin (PAO) Base Oil Viscosity: 110 @ 40°C NLGI Grade: 2 Thickener: Aluminum complex Solid Lubricant: PTFE, white solids High Temp: 163°C Low Temp: -51°C Color: White Hazmat: No Wide Temperature range Formulated for higher load carrying capacity Longer service life and greater wear resistance compared to many petroleum-based lubricants Superior low temperature torque Frequently used in food processing equipment as well as other manufacturing environments. Suitable for: - Rolling element - Plines - Mixers - Motor - Conveyors - Furniture manufacturing - Instrumentation - Photo & optics

Molykote™ G-4500FM Multi-Purpose Synthetic Grease Spray

The same as G-4500FM except that it is in aerosol form to promote easier application.

Created for applications that require an easy spray on application the aerosol form of G-4500 is well suited to a variety of applications, particularly those that require H1 certification as well as FDA 21 CFR 178.3570 Product Type: Dispersion & aerosol, grease Chemistry: Polyalphaolefin (PAO) Base Oil Viscosity: 110 @ 40°C NLGI Grade: 2 Thickener: Aluminum complex Solid Lubricant: PTFE, white solids High Temp: 163°C Low Temp: -51°C Color: White Hazmat: Yes Aerosol form for easy application General purpose light consistency grease Wide operating temperature range Long lasting grease for assembly and maintenance.

Molykote™ G-4501FM Multi-Purpose Synthetic Grease

The same as Molykote™ G-4500FM except that it is NLGI 1 and has semi-liquid consistency for use in automatic dispensers.

NLGI 1 general purpose grease with multiple food certifications including NSF H1 and FDA 21 CFR 178.3570. Developed for high load, superior wear resistance and long service life. Product Type: Grease Chemistry: Polyalphaolefin (PAO) Base Oil Viscosity: 110 @ 40°C NLGI Grade: 1 Thickener: Aluminum complex Solid Lubricant: PTFE, white solids High Temp: 163°C Low Temp: -51°C Color: White Hazmat: No Wide temperature range High load carrying capacity Long service life Synthetic grease Superior low temperature torque Low consistency (semi-fluid) Frequently used in food processing equipment as well as other manufacturing environments. Suitable for: - Rolling element - Splines - Mixers - Motor - Conveyors - Furniture manufacturing - Instrumentation - Photo & optics

Molykote™ G-4700 Extreme Pressure Synthetic Grease

NLGI Grade 2 PAO based grease with a lithium thickener and molybdenum disulfide (Mo2). Meeting Cincinnati Machine P-64 and NLGI GC-LB it is commonly used in general purpose applications.

Synthetic grease designed for extreme pressure and a wide operating temperatures as well ass applications involving shock load and vibration. This makes it suitable for a wide range of applications and materials including plastic and rubber. Product Type: Grease Chemistry: Polyalphaolefin (PAO) Base Oil Viscosity: 150 @ 40°C NLGI Grade: 2 Thickener: Lithium complex Solid Lubricant: MoS2 High Temp: 177°C Low Temp: -40°C Color: Black Hazmat: No Synthetic base oil - Extreme loads - Wear resistance - Extended service life Suitable for vibration and/or shock loading applications Compatible with multiple substrates Superior low temperature torque Certifications: - Cincinnati Machine P-64 - NLGI GC-LB Used for rolling elements, pivot pins, cams, and other machine elements.

Molykote™ G-9000 High Temperature Grase

NLGI Grade 2, flourosilicone based grease with PTFE thickener and a specialty additive package. Offering significantly improved lubricity in high temperature applications.

Developed to impart superior lubricity in high temperature applications, this fluorosilicone grease can extend the service life of equipment and also provide resistance to oxidation. Product Type: Grease Chemistry: Fluorosilicone Base Oil Viscosity: 650 @ 40°C NLGI Grade: 2 Thickener: PTFE Solid Lubricant: PTFE High Temp: 220°C Low Temp: -35°C Color: White Wide temperature range (up to 220°C) Extends equipment service life Corrosion protection Chemical resistance Oxidation resistance

Molykote™ L-0460FM Chain Oil

An ISO 68 mineral oil based oil with rust, oxidation, antiwear, tackifier, pour point depressant, and corrosion inhibited additive package. H1 certified for incidental food contact and commonly used on chains.

H1 certified for incidental food contact this ISO 68 chain oil oil has properties to prevent rust and oxidation (R&O) as well as prevent wear. Product Type: Oil Chemistry: Mineral oil Base Oil Viscosity: 66 @ 40°C ISO Grade: 68 Viscosity Index: 100 Color: Clear to golden yellow Hazmat: No NSF H1 certified for incidental food contact ISO 68 Reduces overall maintenance costs - Extends time between oil drains - Extends equipment life - Reduction of energy usage - Reduction of lubricant usage Anti-wear capabilities Rust prevention Oxidation prevention Wide temperature range Pour point depressant Commonly used on chains and in food machinery

Molykote™ L-0501 High Performance Penetrating Lubricant

Penetrating lubricant offering protection against wear, corrosion, and oxidation. Commonly used for disassembly and lubrication.

Containing anti-wear, corrosion protection, and oxidation protection additives, this multi-purpose penetrating lubricant is ideal for treating rusted parts, eliminating squeaks, and providing long lasting lubrication. Product Type: Dispersion & aerosol Chemistry: Mineral oil High Temp: 49°C Low Temp: -29°C Color: Translucent yellow Hazmat: No Anti-wear additive Longer lasting lubrication when compared to traditional penetrating oils VOC <50% Corrosion protection Oxidation protection Disassembly - Especially when encountering rusted parts Lubrication of: locks, hinges, cranks, chains, knuckles, pivots, etc.

Molykote™ L-1122 Synthetic Gear Oil - ISO 220

An ISO 220 grade PAO gear oil that contains a rust, oxidation, anti-wear, and corrosion inhibited additive package.

Typically used in helical gear boxes, Molykote™ L-1122 is H2 certified. It can lower overall maintenance costs by lengthening oil-drain intervals, reducing lubricant consumption, and extending equipment life. Product Type: Oil Chemistry: Polyalphaolefin (PAO) Base Oil Viscosity: 222 @ 40°C ISO Grade: 220 Viscosity Index: 127 Flash Point: 525°F Pour Point: -39°C SAE: 90 Color: Clear to Golden Yellow Hazmat: No Prevent wear and process disruptions Resistance to oxidation Suitable for high temperature and high load environments Maximize fill intervals Maintains viscosity characteristics at wide temperature ranges Helical gear boxes Power transmission systems Power transmission components

Molykote™ L-1428 High Temperature Chain Oil

A 275 cSt (@ 40°C) POE/PB blended oil with a rust, oxidation, anti-wear, and corrosion inhibited additive package. Commonly used on chains in high temperature applications.

An H2 certified synthetic gear oil with R&O (rust and oxidation) and AW (anti-wear) additives. L-1428 performs well in high temperature environments by extending equipment life and lowering maintenance costs by preventing wear and process disturbance Product Type: Oil Chemistry: Ester; Polyisobutene (PIB) Base Oil Viscosity: 285 @ 40°C Viscosity Index: 110 Color: Clear to golden yellow Reduces overall maintenance costs - Extends time between oil drains - Extends equipment life - Reduction of energy usage - Reduction of lubricant usage Anti-wear capabilities Rust prevention Oxidation prevention Wide temperature range Commonly used in chain applications that are subject to high temperatures

Molykote™ L-1468FM Synthetic Freezer Chain Oil

An ISO 68 polyalphaolefin (PAO) based oil with a rust, oxidation, anti-wear, tackifier, pour point depressant, and corrosion inhibited additive package. H1 certified for incidental food contact commonly used in chains.

H1 certified for incidental food contact this ISO 68 grade chain oil has properties to prevent rust and oxidation (R&O) as well as prevent wear (AW). Product Type: Oil Chemistry: Polyalphaolefin (PAO) Base Oil Viscosity: 65.8 @ 40°C ISO Grade: 68 Viscosity Index: 131 Color: Clear to golden yellow Hazmat: No NSF H1 certified for incidental food contact Reduces overall maintenance costs - Extends time between oil drains - Extends equipment life - Reduction of energy usage - Reduction of lubricant usage Anti-wear capabilities Rust prevention Oxidation prevention Wide temperature range Commonly used in chains

Molykote™ PG 54 Plastislip Grease

NLGI Grade 2-3, silicone based grease with lithium complex thickener offering good corrosion protection commonly used in automotive and electronic systems.

Developed for extended lubrication of a variety of substrates including: metal to plastic; plastic to plastic. Exhibits superior performance in high pressure and corrosive environments Product Type: Grease Chemistry: Silicone Base Oil Viscosity: 200 @ 40°C NLGI Grade: 2-3 Thickener: Lithium complex Solid Lubricant: PTFE High Temp: 180°C Low Temp: -50°C Color: White Hazmat: No Good compatibility with plastics and rubber Operating temperature range between -50° to 180°C Low coefficient of friction High corrosion protection Provides long term lubrication for a variety of substrates High oxidation resistance Especially suited for the low friction operation of most rubber or plastic parts

Molykote™ U-N Paste

PAG based anti-seize paste formulated with solid lubricants such as molybdenum disulfide and white solids. Offering dry lubrication and commonly used for high temperature applications.

Reducing wear and friction and dry lubrication up to 450°C, this paste can manage a high load-carrying capacity and is suitable for a variety of substrates including some rubbers and plastics. Product Type: Anti-Seize Paste Chemistry: Polyalkylene Glycol (PAG) Solid Lubricant: MoS2, white solids High Temp: 450°C Color: Black Hazmat: No Low coefficient of friction Reduces friction Reduces wear Compatible with some natural rubber and plastics Dry lubrication up to 450°C Volatilizes at high temperatures leaving no residue Can lubricate construction components that are not resistant to mineral oil Foundry ladles Converter bearings Belt conveyors Furnaces Shuttle kilns Ironing presses

Never-Seez® Aerosols - NSA-16

Superior, anti-seize and extreme pressure lubricant formulated to protect metal parts against rust, corrosion and seizure.

Never-Seez® Regular Grade is a superior anti-seize and extreme-pressure lubricant formulated to protect metal parts against rust, corrosion, and seizure. Copper and graphite particles in a special grease protect parts even in high heat, high pressure, and corrosive environments. Color: Silver Gray Temperature Range: °F (°C): -297°F to 1800°F (-183°C to 982°C) Thickener Type: Lithium Soap Particle Size, mil (microns): 2 maximum (50 μ) Density (g/cm3): 1.15-1.24 Flash Point, °F (°C): 475°F (246°C) Copper Corrosion Test @ 212°F (100°C), 24 hrs.: No corrosion Worked Penetration, 60 strokes @ 77°F (25°C): 260-310 NLGI Grade: 1/2 Dropping Point, °F (°C): 360°F (182°C) Water Washout, % loss: @ 100°F 0.30 @ 175°F 2.10 Coefficient of Friction @ 167°F (75°C), Four Ball: 0.06 Torque Coefficient, k factor: 0.13 Four Ball EP: Load Wear Index: 81 Last non-seizure load (scar): 63 kgf (0.41 mm) Last seizure load (scar): 400 kgf (1.87 mm) Weld Load: 500 kgf Keeps parts working longer with less wear Minimizes parts replacement costs Enables faster disassembly when repairs are needed (even after exposure to high temperatures) Protects against carbon fusion Resists alkaline solutions, most chemical and acid vapors, road salt, steam, salt water, iodized water Prevents galling on steel to stainless steel, titanium, magnesium, and other hard metals Meets the following specifications: • MIL-A-907 • Ford ESE-M12A4-A • GE D6Y28 • Garrett Engines PCS5724 • UT Pratt & Whitney PWA 36053-2 Available in the following sizes: • NSA-16 (16 oz. aerosol can) Nuts Bolt, Screws Pipe fittings Boom guides Valve assemblies Pump mountings Chain drives Machinery Shafts, Gaskets Press fit assemblies Taps and drills Packing glands Metal fittings

Never-Seez® Black Moly - NSB-150, NSB-35

Designed for industrial applications requiring non-destructive assembly and disassembly where combinations of high loads, high temperatures, and low speeds are encountered.

Never-Seez® Black Moly is a multi-purpose, extreme-pressure, anti-seize lubricant containing a high concentration of molybdenum disulfide. Especially effective under extreme pressures involving heavy loads and slow speed resulting in boundary lubrication conditions. Never-Seez® Black Moly withstands pressures to 500,000 psi up to 750 F°. Color Dark Gray Temperature Range, °F (°C) 1 0°F to 750 °F (-12 °C to 399 °C) Thickener Type Lithium Soap Particle Size, mil (microns) 1.5 maximum (38 μ) Density (g/cm3) 1.20 to 1.28 Flash Point, °F (°C) 475 °F (246 °C) Copper Corrosion Test @ 212 °F (100 °C), 24 hrs. No Corrosion Worked Penetration, 60 Strokes @ 77°F (25°C) 250-310 NLGI Grade 1/2 Dropping Point, °F (°C) 375 °F (191 °C) Water Washout, % loss @ 100 °F <2 @ 175°F <5 Coefficient of Friction @ 167 °F (75°C) Four Ball 0.0597 Torque Coefficient, k factor 0.14 Four Ball EP Load Wear Index: 70.7 Last Non-seizure Load (scar): 100 kgf (0.45 mm) Last Seizure Load (scar): 315 kgf (2.41 mm) Weld Load: 400 kgf Protects and lubricates metal parts in high friction, high pressure environments Provides smooth break-in of new and rebuilt equipment Resists temperatures to 750 °F (399 °C) Available in: • NSB-150 - 1 lb. Flat Top Cans • NSB - 35 - 35 lb. Pails Press fit assemblies, Equipment break-in, Machine tool parts, Highly loaded bearings, Hot exhaust fans, Adjusting screws, Screw Jacks, Crushing mills, Steel forming gates and slides

Never-Seez® High Temperature Stainless - NSSBT-8, NSSBT-16

Superior, high-temperature, anti-seize and extreme-pressure lubricant that protects up to 2200°F.

Never-Seez® High Temperature Stainless is a superior, high-temperature, anti-seize and extreme-pressure lubricant that protects up to 2200°F. It contains fine metallic and graphite particles suspended in a specially formulated grease. Never-Seez® High Temperature Stainless is recommended when applications prohibit the presence of nickel, especially when resistance to corrosive acidic and caustic solutions is required. Color: Silver Gray Temperature Resistance, °F (°C): -297°F to 2200°F (-183°C to 1204°C) Thickener Type: Lithium Soap Particle Size, mil (microns): 2 maximum (50 μ) Density (g/cm3): 1.15 to 1.24 Flash Point, °F (°C): >300°F Copper Corrosion Test @ 212°F (100°C), 24 hrs.: No corrosion Worked Penetration, 60 strokes @ 77°F (°C): 260-310 NLGI Grade: 1/2 Dropping Point, °F (°C): >360°F (182°C) Water Washout, % loss: @ 100°F <2 @ 175°F <5 Coefficient of Friction @167°F (75°C), Four Ball: 0.092 Torque Coefficient, k factor: 0.16 Four Ball EP: Load Wear Index: 55.6 Last Non-seizure load (Scar): 50 kgf (0.40 mm) Last seizure load (scar): 400 kgf (2.59 mm) Weld Load: 500 kgf Excellent resistance to corrosion Prevents seizure at high temperatures Resists galvanic action between dissimilar metals Speeds disassembly Prevents galling Resists alkaline solutions, chemical and acid vapors, road salt, steam, salt water and iodized water: Meets MIL-A-907 Available in the following sizes: • NSSBT-8 (8 oz. brush top can) • NSSBT-16 (1 lb. brush top can) • NSS-425 - (425 drum) Fasteners in steel mills and power plants Stainless steel pipe fittings, flanges, pump fittings and unions Fasteners in exhaust manifolds Reactor bolts Turbine bolts Gauges and fittings

Never-Seez® Mariner's Choice - NMCBT-8, NMCBT-16, NMC-42

Heavy-duty anti-seize and extreme-pressure lubricant formulated to assure absolute parts protection against seizure, galling, and corrosion in fresh and salt water environments.

Mariner's Choice offers unparalleled resistance to water washout and the best protection in continuous high-moisture environments, both above and below water lines. Color: Black-Gray Temperature Range, °F (°C): -297°F to 2,450°F (-183°C to 1,343°C) Thickener Type: Calcium Complex Particle Size, mil (microns): 3.5 maximum (75 μ) Density (g/cm3): 1.31 to 1.39 Flash Point, °F (°C): >475°F (246°C) Salt Fog Test, hrs.: 4,000 Copper Corrosion Test @ 212°F (100°C), 24 hrs.: No Corrosion Worked Penetration, 60 Strokes @ 77°F (25°C): 260-310 NLGI Grade: 1/2 Dropping Point, °F (°C): 572 (300) Torque Coefficient, k factor: 0.11 Water Washout, % loss: @ 100°F: <1.00 @ 175°F: <2.75 Bearing Rust Test (ASTM D-1764): Pass Four Ball EP: Load Wear Index: 127.3 Last non-seizure load (scar): 100 kgf (0.45 mm) Last Seizure Load (scar): 620 kgf (2.21 mm) Weld Load: 800 kgf Fretting Wear @ 73°F (23°C), 22 hrs., mg loss: 7.15 Prevents seizure at temperatures up to 2,450°F (1,343°C) Prevents galvanic corrosion in salt and fresh water environments Superior resistance to water washout and water spray Excellent extreme pressure lubricating properties Low torque factor Compatible with soft metals Contains no copper Tested to MIL-A-907E Available in the following sizes: • NMCBT-8 (8 oz. brush top can) • NMCBT-16 (1 lb. brush top can) • NMC-42 (42 lb. pail) Bilge pumps, screw shafts, prop shaft bearing housing, winches, cables, anchor lines, porthole studs, rigging and hoist cables, Steel mills, suspension bridges, wind turbines, offshore rigging and other applications exposed to harsh salt water and fresh water conditions

Never-Seez® Nickel Nuclear - NG-165, NGBT-8

Specially tested and certified pure anti-seize for use in nuclear power plants.

Never-Seez® Pure Nickel Special, Nuclear Grade, is specially tested and certified pure for use in nuclear power plants. Each production lot of Nuclear Grade Never-Seez® is tested for contaminants of sulfur, halogens, and low-melt metals, and each container is labeled with a lot number that certifies purity. Pure Nickel Special, Nuclear Grade, is a superior, high-temperature, anti-seize, and extreme-pressure lubricant containing flake particles of pure nickel, graphite, and other additives in a special grease carrier found to enhance anti-seize performance. It is recommended for use when applications prohibit the presence of copper, especially when resistance to corrosive acidic caustic solutions is required. A special, high-quality grease with graphite, pure nickel, and other additives. Contains no molybdenum disulfide, lead, or mercury except as trace elements. Color: Silver Gray Temperature Range: °F (°C): -297°F to 2400°F (-183°C to 1316°C) Thickener Type: Lithium Soap Particle Size:mil (microns): 2 maximum (50m) Density, (g/cm3): 1.22 to 1.28 Flash Point, °F (°C): >300°F (>149°C) Copper Corrosion Test @ 212°F (100°C), 24 hrs.: No corrosion Worked Penetration, 60 strokes @25°F (25°C): 260-310 NLGI Grade: 1/2 Dropping Point, °F (°C): 360°F (182°C) Water Washout, % loss: @ 100°F: <2 @ 175°F <5 Coefficient of Friction @ 167°F (75°C), Four Ball: 0.092 Torque Coefficient, k factor: 0.158 Four Ball EP: Load Wear Index: 68 Last non-seizure load (scar): 79 kgf (0.59 mm) Last seizure load (scar): 250 kgf (1.46 mm) Weld Load: 315 kgf Excellent heat dispersing qualities Minimizes corrosion Prevents seizure at high temperatures Resists galvanic action between dissimilar metals Enables fast disassembly-even after high temperature exposure Prevents galling on steel to stainless steel, titanium, magnesium and other hard metals Resists alkaline solutions, most chemical and acid vapors, road salt, steam, salt water, ionized water Meets the following specifications: • GE Atomic Equipment Division: • D50YP12 • D6Y6 • MIL-A-907 • Ford ESE-M12A4-A • Ford WSD-M13P8-A1 • Boeing BAC 5008 Type 7-3 • U.T. Pratt & Whitney PWA 36053-1 • GE Engine A50-TF198 Class A • Garrett Engine PCS5721 Available in the following sizes: • NG-165 (1 lb. flat top can) • NGBT-8 (8 oz. brush top can) Fittings Fasteners Exposed to high temperatures in steel mills Power plants Nuclear plants Stainless steel pipe fittings Flanges Pump fittings Fasteners in exhaust manifolds and boilers Steam generators Assembly of dissimilar metals

Never-Seez® Regular Grade - NSBT-8, NSBT-16, NSC-1, NS-160, NSB-4, NS-168, NS-42, NS-130, NS-425

Superior, anti-seize and extreme pressure lubricant formulated to protect metal parts against rust, corrosion and seizure.

Never-Seez® Regular Grade is a superior anti-seize and extreme-pressure lubricant formulated to protect metal parts against rust, corrosion, and seizure. Copper and graphite particles in a special grease protect parts even in high heat, high pressure, and corrosive environments. Color: Silver Gray Temperature Range: °F (°C): -297°F to 1800°F (-183°C to 982°C) Thickener Type: Lithium Soap Particle Size, mil (microns): 2 maximum (50 μ) Density (g/cm3): 1.15-1.24 Flash Point, °F (°C): 475°F (246°C) Copper Corrosion Test @ 212°F (100°C), 24 hrs.: No corrosion Worked Penetration, 60 strokes @ 77°F (25°C): 260-310 NLGI Grade: 1/2 Dropping Point, °F (°C): 360°F (182°C) Water Washout, % loss: @ 100°F 0.30 @ 175°F 2.10 Coefficient of Friction @ 167°F (75°C), Four Ball: 0.06 Torque Coefficient, k factor: 0.13 Four Ball EP: Load Wear Index: 81 Last non-seizure load (scar): 63 kgf (0.41 mm) Last seizure load (scar): 400 kgf (1.87 mm) Weld Load: 500 kgf Keeps parts working longer with less wear Minimizes parts replacement costs Enables faster disassembly when repairs are needed (even after exposure to high temperatures) Protects against carbon fusion Resists alkaline solutions, most chemical and acid vapors, road salt, steam, salt water, iodized water Prevents galling on steel to stainless steel, titanium, magnesium, and other hard metals Meets the following specifications: • MIL-A-907 • Ford ESE-M12A4-A • GE D6Y28 • Garrett Engines PCS5724 • UT Pratt & Whitney PWA 36053-2 Available in the following sizes: • NSBT-8 (8 oz. brush top can) • NSBT-16 (16 oz. brush top can) • NSC-1 (1 lb. cartridge) • NS-168 (8 lb. flat top can) • NS-160 (1 lb. flat top can) • NSB-4 (4 oz. tube) • NS-42 (42 lb. pail) • NS-130 (130 lb. drum) • NS-425 (425 lb. drum) • Pipettes (7.5 gram pipette) Nuts Bolt Screws Pipe fittings Boom guides Valve assemblies Pump mountings Chain drives Machinery Shafts Gaskets Press fit assemblies Taps and drills Packing glands Metal fittings

Never-Seez® White Food Grade with PTFE - NSWT-14, NSWT-1C, NSWT-120

A premium quality anti-seize and lubricating compound composed entirely of ingredients which meet FDA requirements where incidental food contact is possible.

Never-Seez® White Food Grade with PTFE is a premium quality lubricant composed entirely of ingredients which meet FDA requirements where incidental food contact is possible. It has been approved by the U.S. Department of Agriculture for use in establishments operating under the Federal Meat and Poultry Products Inspection Program. The unique dispersion of FDA authorized PTFE provides additional lubricity especially where a thin film of lubricant is desirable. Never-Seez White Food Grade with PTFE is virtually odorless, colorless, and tasteless. It is a "multi-purpose" lubricant for varied services within a food handling plant. Color: White Temperature Range: -5°F to 475°F (-21°C to 246°C) Thickener Type: Aluminum Complex Particle Size, mil (microns): 2.0 max. (50 μ) Density, (g/cm3): 0.91 to 1.03 Flash Point, °F (°C): 430°F (221°C) Copper Corrosion Test @ 212°F (100°C): 24 hrs. 1b Worked Penetration (60 strokes @ 77°F (25°C): 255-295 NGLI Grade: 2 Dropping Point, (minimum) °F (°C): >450°F (232°C) Torque Coefficient, k factor: 0.13 Water Washout, % loss: @ 175°F (79°C): <5 Bearing Rust Test: Pass Timken OK Load, lb.: 40 Four Ball EP: Load Wear Index: 43.7 Last non-seizure load (scar): 63 kgf (0.36 mm) Last seizure load (scar): 250 kgf (2.42 mm) Weld Load: 315 kgf Provides maximum lubrication up to 475°F Keeps parts working longer with less wear Prevents rust and corrosion Resists water and chemical washout Non-staining Provides a seal against entrance of liquids in bearings Suitable for pipe threads used with potable water— will not impart an odor or taste Certified NSF H-1 Available in the following package sizes: • NSWT-14 (14 oz. flat top can) • NSWT-1C (14.1 oz. cartridge) • NSWT-120 (120 lb. drum) Nuts, bolts, screws Pipe fittings Stainless steel fittings Valve stems and assemblies Pump gears Chain drives Gaskets Press fit assemblies Conveyor and oven bearings Packaging machinery Worm gears Slow speed or highly loaded bearings <500 RPM

Royco® 308CA

General purpose, lubricating, and preservative/water-displacing oil which meets MIL - PRF - 32033 specifications. NATO Specification: O-190 (obsolete). Joint Service Designation: OX-18 (obsolete).

An blend of highly refined hydrocarbons and additives that offers excellent corrosion inhibition, low-temperature fluidity and water displacing capability. Originally designed for the most stringent requirements to maintain the military’s small arms this lubricant will meet the needs of any demanding application/environment where performance is in demand. Specification: MIL - PRF - 32033 MIL-SPEC Scope: This specification covers one type and grade of waterdisplacing, preservative lubricating oil, known hereinafter as “oil”, for general purpose applications at low temperatures. The oil is identified by Military Symbol PL-S and NATO Code Number O-190. The oil can be applied by dipping, brushing, or by spraying from gas-pressurized cans.

Royco® 483

humidity and neutralizing acidic oxidation/combustion by-products.

Aircraft turbojet engine & parts preservative fluid which meets MIL-C-6529 specifications. NATO Specification: C-610. Joint Service Designation: OX-11. Formulated with a balanced ashless, anti-corrosion additive system and highly refined petroleum base oils this fluid protects turbine engines by minimizing the effects of ambient...

An ashless, anti-corrosion preservative and “fly away” fluid for turbine engines. This preservative is recommended for gas turbine engines normally lubricated with mineral based fluids. Specification: MIL - C - 6529 TYPE 3 MIL-SPEC Scope: This specification covers an oil-type corrosion preventive which shall be a satisfactory lubricant for aircraft engines when applied as specified.

Royco® 49

Extreme pressure grease with MoS2 which meets MIL - DTL - 23549 specifications. NATO Specification: G-392. Joint Service Designation: XG-271.

Mineral oil based grease with an inorganic gel thickener and micro-fine molybdenum disulfide that is compounded with additives to impart oxidation resistance, water washout, and both fresh and salt-water corrosion protection. Specification: MIL - DTL - 23549 MIL-SPEC Scope: This specification covers the requirements for one type and grade of a general purpose molybdenum disulfide grease for extended use at temperatures up to 177 °C (350 °F) and for brief periods of use at temperatures up to 204 °C (400 °F).

UCON™ LB-170-X

ISO 150/220, polypropylene glycol fluid designed for high temperature applications.

Alcohol-started base stocks featuring oxypropylene groups (m=0) with one terminal hydroxyl group. This product is water insoluble and has a viscosity of 170 cSt @ 100 °F Color: brown Odor: Mild Boiling point (760 mmHg): > 200 °C ( > 392 °F) Flash point: closed cup 186 °C ( 367 °F) ASTM D 93 Vapor Pressure: < 0.01 mmHg at 20 °C (68 °F) ASTM E1719 Relative Vapor Density (air = 1): >1 Calculated. Relative Density (water = 1): 0.987 at 20 °C (68 °F) / 20 °C Calculated. Water solubility: < 0.1 % Visual Kinematic Viscosity: 32.5 - 35.9 cSt at 40 °C (104 °F) ASTM D 445 Pour point: < -29 °C ( < -20 °F) ASTM D97 Volatile Organic Compounds: 0.0 g/L EPA Method No. 24 Higher flash points Less volatility at elevated temperatures Less likely to form oxidative by- products. Less tendency to become acidic Intended for applications that require enhanced oxidative stability.

UCON™ LB-1800-XY26

High viscosity oil, polypropylene glycol monobutyl ether fluid designed for applications that have high temperature and extreme pressure requirements. Also has special additives for copper and iron corrosion protection.

Water insoluble butanol-propylene oxide polymer based products specially formulated with additives for iron and copper corrosion protection, extreme pressure and high temperature use. Viscosity of 1745-1925 cSt at 100 °F. Appearance: Brown liquid Viscosity, SUS, 37.8°C (100°F), ASTM D 445: 11745- 1925 Specific Gravity, 20/20°C, ASTM D 4052: 1.006 Pour Point, °C (°F), ASTM D 97: <-25 (<-15) Flash Point, Open Cup, °C (°F), ASTM D 92: 265 (510) Water, wt%, ASTM E 203: 0.30 max Lower coefficient of friction Wider operating temperature range No sludge, varnish, gums, and tars Long service life Fewer equipment limitations Used as a lubricating fluid for industrial applications. Ideal for those applications requiring corrosion protection at high temperatures.

UCON™ LB-300-X

ISO 320, polypropylene glycol fluid designed for high temperature applications.

Alcohol-started base stocks featuring oxypropylene groups (m=0) with one terminal hydroxyl group. This product is water insoluble and has a viscosity of 300 cSt @ 100 °F Viscosity @100°F, SUS ASTM D 445: 300 Viscosity Index, ASTM D 2270: 174 Lbs/gallon @ 20°C: 8.30 Specific Gravity@ 20/20°C: 0.997 Closed Cup Flash Point ASTM D 93, °C (°F): 192 (378) Open Cup Flash Point ASTM D 92, °C (°F): 237 (460) Water, wt%: 0.25 Color: Brown Odor: Mild Boiling point: (760 mmHg) > 200 °C ( > 392 °F) Higher flash points Less volatility at elevated temperatures Less tendency to form oxidative by-products, e.g. aldehydes, organic acids Less tendency to become acidic during use Used as a lubricating fluid for industrial applications that require enhanced stability toward oxidation at high temperatures.

UCON™ LB-300-XY26

ISO 320 oil, polypropylene glycol monobutyl ether fluid designed for applications that have extreme pressure and high temperature requirements. Also has special additives for iron and copper corrosion protection.

Water insoluble butanol-propylene oxide polymer based products specially formulated with additives for iron and copper corrosion protection, extreme pressure and high temperature use. Viscosity of 260-330 cSt at 100 °F. Physical state: Liquid. Color: Brown Odor: Mild Boiling point (760 mmHg): > 200 °C ( > 392 °F) Flash point: closed cup 210 °C ( 410 °F) ASTM D 93 Vapor Pressure: < 0.01 mmHg at 20 °C (68 °F) ASTM E1719 Relative Vapor Density (air = 1): >1 Calculated. Relative Density (water = 1): 0.992 at 20 °C (68 °F) / 20 °C Water solubility: < 0.1 % at 20 °C (68 °F) Visual Pour point: < -26 °C ( < -15 °F) ASTM D97 Higher flash points Less volatility at elevated temperatures Less tendency to form oxidative by-products, e.g. aldehydes, organic acids Less tendency to become acidic during use Used as a lubricating fluid for industrial applications that require enhanced stability toward oxidation at high temperatures.

UCON™ LB-400-X

ISO 460 polypropylene glycol fluid designed for high temperature applications.

Alcohol-started base stocks featuring oxypropylene groups (m=0) with one terminal hydroxyl group. This product is water insoluble and has a viscosity of 400 cSt @ 100 °F Color: Brown Odor: Mild Boiling point (760 mmHg): > 200 °C ( > 392 °F) Calculated. Flash point: closed cup 217 °C ( 423 °F) ASTM D 93 Vapor Pressure: < 0.01 mmHg at 20 °C (68 °F) ASTM E1719 Relative Vapor Density (air = 1): >1 Calculated. Viscosity @ 100°F, SUS ASTM D 445: 400 Viscosity Index, ASTM D 2270: 179 Lbs/gallon @ 20°C: 8.30 Specific Gravity@ 20/20°C: 0.997 Closed Cup Flash Point ASTM D 93, °C (°F): 217 (423) Open Cup Flash Point ASTM D 92, °C (°F): 262 (505) Water, wt%: 0.25 Higher flash points Less volatility at elevated temperatures Less tendency to form oxidative by-products, e.g. aldehydes, organic acids Less tendency to become acidic during use Used as a lubricating fluid for industrial applications that require enhanced stability toward oxidation at high temperatures.

UCON™ LB-550-X

ISO 460/680 polypropylene glycol fluid designed for high temperature applications.

Alcohol-started base stocks featuring oxypropylene groups (m=0) with one terminal hydroxyl group. This product is water insoluble and has a viscosity of 550 cSt @ 100 °F Color: Brown Odor: Mild Boiling point (760 mmHg): > 200 °C ( > 392 °F) Flash point: closed cup 180 °C ( 356 °F) ASTM D 93 Vapor Pressure: < 0.01 mmHg at 20 °C (68 °F) ASTM E1719 Relative Vapor Density (air = 1): >1 Calculated. Relative Density (water = 1): 0.997 at 20 °C (68 °F) / 20 °C Calculated. Water solubility: < 0.1 % Visual Viscosity @ 100°F, SUS ASTM D 445: 550 Viscosity Index, ASTM D 2270: 188 Lbs/gallon @ 20°C: 8.30 Specific Gravity@ 20/20°C : 0.998 Closed Cup Flash Point ASTM D 93, °C (°F): 218 (425) Open Cup Flash Point ASTM D 92, °C (°F): 248 (540) Water, wt%: 0.25 Higher flash points Less volatility at elevated temperatures Less tendency to form oxidative by-products, e.g. aldehydes, organic acids Less tendency to become acidic during use Used as a lubricating fluid for industrial applications that require enhanced stability toward oxidation at high temperatures.

UCON™ LB-650-X

ISO 680 polypropylene glycol fluid designed for high temperature applications.

Alcohol-started base stocks featuring oxypropylene groups (m=0) with one terminal hydroxyl group. This product is water insoluble and has a viscosity of 650 cSt @ 100 °F Physical state: Liquid. Color: Brown Odor: Mild Boiling point (760 mmHg): > 200 °C ( > 392 °F) Calculated. Flash point: closed cup 233 °C ( 451 °F) ASTM D 93 Vapor Pressure: < 0.01 mmHg at 20 °C (68 °F) ASTM E1719 Relative Vapor Density (air = 1): >1 Calculated. Relative Density (water = 1): 0.999 at 20 °C (68 °F) / 20 °C Calculated. Water solubility: < 0.1 % Visual Viscosity @ 100°F, SUS ASTM D 445: 650 Viscosity Index, ASTM D 2270: 193 Lbs/gallon @ 20°C: 8.32 Specific Gravity@ 20/20°C: 0.999 Closed Cup Flash Point ASTM D 93, °C (°F): 233 (453) Open Cup Flash Point ASTM D 92, °C (°F): 279 (535 Water, wt%: 0.25 Higher flash points Less volatility at elevated temperatures Less tendency to form oxidative by-products, e.g. aldehydes, organic acids Less tendency to become acidic during use Used as a lubricating fluid for industrial applications that require enhanced stability toward oxidation at high temperatures.

UCON™ LB-650-XY23

ISO 100/150 oil, polypropylene glycol monobutyl ether fluid designed for applications that have extreme pressure and high temperature requirements. Also has special additives for iron and copper corrosion protection.

Water insoluble butanol-propylene oxide polymer based with a viscosity of 124-143 cSt @ 40 °C Viscosity, cSt, 40°C, ASTM D 445: 124 - 143 Specific Gravity, 20/20°C, ASTM D 4052: 1.000 Pour Point, °C (°F), ASTM D 97: -28.9 (-20) Flash Point, Open Cup, °C (°F), ASTM D 92: 271 (520) Flash Point, Closed Cup, °C (°F), ASTM D 93: 149 (300) Water, wt%, ASTM E 203: 0.30 max Higher flash points Less volatility at elevated temperatures Less tendency to form oxidative by-products, e.g. aldehydes, organic acids Less tendency to become acidic during use Used as a lubricating fluid for industrial applications that require enhanced stability toward oxidation at high temperatures.