Ethylene glycol-based fluid exhibiting lower viscosity and heat transfer performance for HVAC and chemical industry.
Provides excellent heat transfer performance and exceptional thermal stability in well-maintained heat transfer systems. Ethylene glycol-based fluid Density at 20c: 1.114 Ph of solution: 8.0-8.8 Reserve Alkalinity min: 9.5 Freeze point: -36 Offers a low acute oral toxicity, reducing contamination hazards compared to methanol alternatives. HVAC Pharmaceutical Secondary cooling and heating Freeze, burst protection Renewable energy Ground Source Heat Pumps (GSHP)
An ethylene glycol-based fluid especially requiring corrosion protection at lower glycol concentrations.
Provides excellent heat transfer performance and exceptional thermal stability in well-maintained heat transfer systems. Ethylene glycol-based fluid Offers a low acute oral toxicity, reducing contamination hazards compared to methanol alternatives. HVAC Pharmaceutical Secondary cooling and heating Freeze, burst protection Renewable energy Ground Source Heat Pumps (GSHP
A formulation of ethylene glycol that features one of the highest maximum use temperature of any glycol, operating temperature ranges -60°F to 350°F. The fluid is dyed fluorescent orange to aid in leak detection.
DOWTHERM™ 4000 inhibited ethylene glycol (EG) is comprised of about 92% EG and 8% corrosion inhibitors and has a bright fluorescent orange color. The lower EG content allows for a higher concentration of corrosion inhibitors which in turn means DOWTHERM™ 4000 is capable of operating at higher temperatures than DOWTHERM™ SR1 i.e. from -20°F to 350°F. This makes DOWTHERM™ 4000 a higher end, niche type product which is also capable of providing freeze protection down to -60°F. Ethylene glycol-based fluid (92%) Fluorescent orange Increased concentration of inhibitors Efficient heat transfer Operating range: -20°F to 350°F for heat transfer 60°F for burst protection Wide-temperature range operability Heating, Ventilation & Air Conditioning (HVAC) Chill water & hydronic heating loops Geothermal (ground source heat pumps) Snow melt & Turf heating systems Solar hot water heating Fire water sprinkler systems Refrigeration Ice skating rinks Cold storage, refrigerated warehouses & supermarkets (secondary loop) Thermal Energy Storage (TES)
A liquid diphenyl oxide/biphenyl blend with operating temperatures of 60°F to 750°F (15°C to 400°C) employing either liquid phase or vapor phase heating.
Eutectic mixture of two very stable compounds, biphenyl and diphenyl oxide Mixture can be handled as if it were a single compound Liquid phase or vapor phase heating Temperature: 60 to 750°F Vapor Pressure: 152.02 Specific Heat: 0.373°F Viscosity: 4.91 Density: 66.37 Freezing Point: 53.6°F Flash Point: 236°F Autoignition: 1139°F Most stable organic fluid available Highest use temperature Liquid and vapor phase Mixture of diphenyl oxide and diphenyl With low viscosity to minimize startup problems, and a freezing point of 54 F, Can be used without steam tracing in installations protected from the weather Used in production of nylon, PET fiber, PET resin, formaldehyde, vegetable oil, solar, refineries, lube stock, PAO
A liquid mixture of di- and tri-aryl ethers with operating temperature ranges of -20°F to 680°F (29°C to 371°C).
One of the most thermally stable low pressure liquid phase heat transfer fluid on the market and has excellent flow characteristics at low temperatures. Temperature: 20 to 680°F Vapor Pressure: 49.12 Specific Heat: 0.363°F Viscosity: 146 Density: 70.34 Freezing Point: <40°F Flash Point: 266°F Autoignition: 1083°F Mixture of di- and tri- aryl compounds Liquid phase only, pressurized above 290°C Lower pressure than DOWTHERM A Fluid Good physical properties Used in production of polystyrene, polycarbonate, heat recovery, offshore platforms, refineries
An alkylated aromatic liquid with operating temperature ranges of -110°F to 600°F (-80°C to 315°C).
Offers remarkable low-temperature pumpability and thermal stability for protection against accidental overheating. Temperature: -110 to 600°F Vapor Pressure: 174.52 Specific Heat: 0.376°F Viscosity: 9.67 Density: 58.31 Freezing Point: <-100°F Flash Point: 136°F Autoignition: 788°F Liquid and vapor phase Excellent low temperature properties Fluid of choice for the most demanding single fluid heating and cooling applications (batch processing) Used in production of pharmaceuticals, environmental test chambers, fiber spinning
A heat transfer fluid containing a mixture of alkylated aromatics and designed for use as an alternative to hot oils in liquid phase heat transfer systems.
DOWTHERM™ MX fluid can be used in non-pressurized systems up to temperatures of 620 °F (327 °C). Temperature: -10 to 625°F Vapor Pressure: 15.1 Specific Heat: 0.351°F Viscosity: 281.7 Density: 61.9 Freezing Point: -13°F Flash Point: 329°F Autoignition: 788°F Low vapor pressure fluid Excellent low temperature pumpability Thermal stability superior to Hot Oils 5 to 6 times more stable Designed for use in non-pressurized systems Liquid phase operation only Has a high flash point Used in LNG, Off shore Platforms, Heat recovery, Polystyrene, Polyethylene, Topping units, Asphalt, Refineries
A heat transfer fluid containing a mixture of diphenylethane and alkylated aromatics.
Compared to hot oils, it exhibits better thermal stability 35 °C to 330 °C (-30 °F to 625 °F), particularly at the upper end of hot oils use range, and significantly better low-temperature pumpability. Suitable applications include use as an alternative to hot oils in liquid phase heat transfer applications. Temperature: -30° to 625°F Vapor Pressure: 48.08 Specific Heat: 0.353°F Viscosity: 48.2 Density: 63.23 Freezing Point: -30°F Flash Point: 249°F Autoignition: 773°F Best value for moderate temperatures Better thermal stability than hot oils Better physical properties than hot oils No heat tracing to -35 °C Need pressurization above 265 °C Usesd in LNG, Off shore Platforms, Heat recovery, Polystyrene, Polyethylene, Topping units, Asphalt, Refineries
A diaryl alkyl heat transfer fluid that is intended for use in applications that require liquid phase heat transfer.
Unlike other low pressure fluids - including partially hydrogenated terphenyls and dibenzyl toluene fluids, DOWTHERM™ RP fluid degrades primarily to low molecular weight products. DOWTHERM™ RP has a Maximum bulk temperature of 350 °C (660 °F) and a maximum film temperature of 375 °C (710 °F). Temperature: 30°F to 660°F Vapor Pressure: 13.63 Specific Heat: 0.372°F Viscosity: 249 Density: 65.25 Freezing Point: <-4°F Flash Point: 381°F Autoignition: 725°F Best thermal stability of any liquid phase fluid Does not form tar or high boiling degradation products Liquid phase fluid used in pressure-less or low-pressure systems Used in production of PET resin, PET film, phenol, polycarbonate, polystyrene, refineries, LNG, offshore platforms
A formulation of ethylene glycol and a specially designed package of industrial corrosion inhibitors with operating temperature ranges of -60°F to 250°F. The fluid is dyed fluorescent pink for leak detection purposes.
DOWTHERM™ SR1 inhibited ethylene glycol (EG) is comprised of about 95% EG and 5% corrosion inhibitors. DOWTHERM™ SR1 is the most popular EG based product within the Dow portfolio. In fact, DOWTHERM™ SR1 is the most widely recognized brand name in the industry. It offers effective heat transfer over a wide temperature range: from -20°F to 250°F and provides freeze protection down to -60°F. Color: Pink Ethylene glycol-based fluid Ethylene glycol-based fluid (95%) Fluorescent pink Efficient heat transfer Operating range: -20°F to 250°F for heat transfer 60°F for burst protection Offered in various package sizes and blends. DOWTHERM™ SR-1 25% DOWTHERM™ SR-1 30% DOWTHERM™ SR-1 35% DOWTHERM™ SR-1 40% DOWTHERM™ SR-1 45% DOWTHERM™ SR-1 50% DOWTHERM™ SR-1 60% Heating, Ventilation & Air Conditioning (HVAC) Chill water & hydronic heating loops Geothermal (ground source heat pumps) Snow melt & Turf heating systems Solar hot water heating Fire water sprinkler systems Refrigeration Ice skating rinks Cold storage, refrigerated warehouses & supermarkets (secondary loop) Thermal Energy Storage (TES)
A heat transfer fluid that is a mixture of C14-C30 alkyl benzenes intended for use in applications that require liquid phase heat transfer.
For use in non-pressurized liquid phase systems with a maximum temperature of 550 °F (288 °C) and a bulk temperature of 600 °F (315 °C) Temperature: 14°F to 550°F Vapor Pressure: 2.6 Specific Heat: 0.446°F Viscosity: 252 Density: 55.81 Freezing Point: <14°F Flash Point: 370°F Autoignition: 707°F Synthetic organic alternative to Hot Oils Optimum economic bulk operating temperature 288°C No steam tracing required to -10°C Liquid phase operation only Does not require pressurized expansion tank Used in Offshore, Gas processing, Textiles, Plastics processing, General CPI
A polydimethylsiloxane liquid with operating temperature ranges of -40°F to 750°F (-40°C to 400°C).
Highly stable, long-lasting silicone fluid designed for high temperature liquid phase operations. Temperature: -40 to 750 °F (-40°C to 400°C) Vapor Pressure: 197.32 (91.84°C) Specific Heat: 0.360 °F (-17.57°C) Viscosity: 51.0 Density: 61.9 Freezing Point: < -40 °F (-40°C) Flash Point: 320 °F (160°C) Autoignition: 725 °F (385°C) Fluid life > 10 years at 400 °C Low toxicity No odor Non-fouling Very low in acute oral toxicity Used in NDC, Lube Oil Recycling, Heat Recovery, Polymer Processing, Carbon Fiber
A polydimethylsiloxane liquid used from -100°C to 260 °C
Specifically formulated, high performance silicone polymer designed for use as a low temperature, liquid phase heat transfer medium. It offers remarkable low temperature heat transfer and pumpability, plus thermal stability. Temperature: -100 to 500 °F (-73.3°C) Vapor Pressure: 75.46 Specific Heat: 0.078 °F (-17.7°C) Viscosity: 90.17 Density: 59.3 Freezing Point: -158 °F (-105.5°C) Flash Point: 116 °F (46.6°C) Autoignition: 662 °F (350°C) Non toxic with regard to acute oral ingestion Physical properties allow it to be used in place of chlorinated solvents as a secondary coolant Used in pharmaceutical applications, Single fluid heating and cooling, Environmental test chambers
A formulation of ethylene glycol and specifically designed inhibitor packages with operating temperature ranges of -60°F to 250°F.
Manufactured with 100% virgin ethylene glycol and specifically formulated with heavy-duty industrial inhibitor packages that prevent corrosion, these fluids are widely used for closed-loop, process heating and process cooling. The inhibitors are easily maintained, long lasting and replenishable, which means intervals between fluid change-outs are extended and fluid expense is minimized. Ethylene glycol-based fluid Wide temperature range operability HVAC; Oil & Gas; Immersion freezing; Process cooling; Process heating; Solar heating; Radiant Heating; Thermal Energy Storage; Geothermal; Snow Melt Systems; Fermentation Cooling
Formulated for high-temperature, liquid-phase heat transfer in systems requiring bulk temperatures up to 500°F.
UCON™ HTF 500 is compatible with most common metals, including all steels, iron, aluminum, copper and copper alloys and is noncorrosive. UCON™ HTF 500 has been used in many high temperature applications and is often recommended by heating equipment manufactures. Viscosity at 100°F: 62 Specific gravity: 1.038 Pour Point: -55 Boiling Point: None- nonvolatile liquid Flashpoint (ASTM D92): 575 Fire Point (ASTM D92): 600 Viscosity Index: 200 High heat transfer efficiency Water soluble Fantastic materials compatibility Long lasting Lower maintenance costs High flash point High fire point Easy to use with conventional equipment Chemical processing Laminating and calendaring rolls Dies and molds in the rubber and plastics industry Drying rolls and ovens Die-cast zinc and aluminum alloys Intended for use in closed circulating systems.
For use in water and water/glycol based systems. Flouresces blue when scanned with a high intensity Spectroline leak detection lamp.
For use in water and water/glycol based systems. Flouresces green when scanned with a high intensity Spectroline leak detection lamp.
Hi, let us know if you have any questions as you visit our website.