3M™ PF-5052

A replacement for ozone depleting substances, ideal for use in medium temperature range heat transfer applications. Has a boiling point of 50°C.

A clear, colorless, fully-fluorinated liquid PF-5052 fluid is chemically and thermally stable, practically non-toxic, and nonflammable. (b.p 50C) Appearance: Clear, colorless Average Molecular Weight: 299 Boiling Point (1 atm): 50°C Pour Point: -80°C Estimated Critical Temperature: 454 K Latent Heat of Vaporization (at normal boiling point): 105 J/g Liquid Density: 1.07 g/ml Kinematic Viscosity: 0.40 centistokes Absolute Viscosity: 0.68 centipoise Coefficient of Expansion: 0.0016 °C-1 Surface Tension: 10 dynes/cm Refractive Index: 1.266 Water Solubility: 14 ppmw Solubility in Water: <5 ppmw Thermal stability Chemical stability Wide liquid range Non-conductive Depositing or removing fluorinated oils and lubricants along with use as heat transfer fluid in medium temperature ranges.

3M™ PF-5056

A colorless, fully-fluorinated liquid that is chemically & thermally stable, non-flammable & practically non-toxic. It is effective in reducing the thermal conductivity of polyurethane & other rigid foam formulations. Has a boiling point of 250°C - 80°C.

Ideal solvent for depositing or removing fluorinated oils and lubricants along with use as heat transfer fluid in medium temperature ranges. Also used as additive to improve closed-cell micropourous blown foams. A clear, colorless, fully-fluorinated liquid PF-5052 fluid is chemically and thermally stable, practically non-toxic, and nonflammable. (b.p 40-60C) Appearance: Clear, colorless Boiling Point (101 kPa): 250°C - 80°C Liquid Density: 1.7 g/ml Kinematic Viscosity: <1 centistokes Water Solubility: < 20 ppmw Solubility in Water: <5 ppmw Thermal stability Chemical stability Wide liquid range Non-conductive Used in combination with hydrocarbon blowing agents such as cyclopentane, reducing the cell size and the thermal conductivity of many rigid foam formulations. Products potentially benefiting from the use of performance fluid PF-5056 include: Appliances Commercial Refrigeration Refrigerators Refrigerated Transport Freezers Building Construction Panels

3M™ PF-5058

A blend of clear, colorless, fullyfluorinated liquids that is chemically and thermally stable, practically non-toxic and nonflammable. Has a boiling point of 80°C - 100°C.

Ideal solvent for depositing or removing fluorinated oils and lubricants along with use as heat transfer fluid in medium temperature ranges. Slower evaporation rate is useful for deep-draw and cold-rolling lubricant formulations. Is a clear, colorless, fully-fluorinated liquid. PF-5052 fluid is chemically and thermally stable, practically non-toxic, and nonflammable. (b.p 80-100C) Appearance: Clear, colorless Boiling Point (101 kPa): 80°C – 100 °C Liquid Density: 1.75 g/ml Kinematic Viscosity: 0.9 centistokes Water Solubility: < 15 ppmw Solubility in Water: <5 ppmw Thermal stability Chemical stability Wide liquid range Non-conductive An effective alternative to chlorofluorocarbons (CFCs) in a wide range of applications, from lubricant deposition to process solvent applications.

3M™ PF-5060

A clear, colorless, fully-fluorinated liquid that is chemically and thermally stable, practically non-toxic, and nonflammable. Has a boiling point of 56°C.

High dielectric strength, excellent material compatibility, along with chemical thermal stability makes fluid useful in applications such as lubricant deposition and reaction media. Appearance: Clear, colorless Average Molecular Weight: 338 Boiling Point (1 atm): 56°C Pour Point: -90°C Estimated Critical Temperature: 451 K Estimated Critical Pressure: 1.83 x 106 Pa Vapor Pressure: 30.9 x 103 Pa Latent Heat of Vaporization (at normal boiling point): 88 J/g Liquid Density: 1.68 g/ml Kinematic Viscosity: 0.38 centistokes Absolute Viscosity: 0.64 centipoise Liquid Specific Heat: 1.05 J g-1 °C--1 Liquid Thermal Conductivity: 0.057 W m-1 °C-1 Coefficient of Expansion: 0.0016 °C-1 Surface Tension: 12 dynes/cm Refractive Index: 1.249 Water Solubility: 10 ppmw Solubility in Water: <5ppmw Thermal stability Chemical stability Wide liquid range Non-conductive Used in a wide range of applications, such as lubricant deposition, reaction media and heat transfer.

Dowcal 100E

Ethylene glycol-based fluid exhibiting lower viscosity and heat transfer performance for HVAC and chemical industry.

Provides excellent heat transfer performance and exceptional thermal stability in well-maintained heat transfer systems. Ethylene glycol-based fluid Density at 20c: 1.114 Ph of solution: 8.0-8.8 Reserve Alkalinity min: 9.5 Freeze point: -36 Offers a low acute oral toxicity, reducing contamination hazards compared to methanol alternatives. HVAC Pharmaceutical Secondary cooling and heating Freeze, burst protection Renewable energy Ground Source Heat Pumps (GSHP)

Dowcal 200E EMEA

Propylene glycol-based fluid with low acute toxicity as an alternative to ethylene glycol for secondary cooling or heating in construction and industry. • Density at 20c: 1.043 • Ph of solution: 7.7-8.5 • Reserve Alkalinity min: 9.0 • Freeze point: -32

This fluid is low in acute oral toxicity and contains a specially formulated inhibitor package that helps prevent corrosion of materials common in HVAC construction, food and beverage processing, and other systems. Propylene glycol based fluid Improved corrosion protection for aluminum alloys Suitable for use at a minimum 20% concentration for high and low temperatures Long lifetime Low acute oral toxicity Free of nitrite, borax and CMR Available in various package sizes and blends. Suitable applications include: single fluid process heating and cooling; closed-loop, water-based heating and air conditioning systems where propylene glycol-based fluids are preferred or required; and food industry applications within temperature range.

DOWCAL™ 100

An ethylene glycol-based fluid especially requiring corrosion protection at lower glycol concentrations.

Provides excellent heat transfer performance and exceptional thermal stability in well-maintained heat transfer systems. Ethylene glycol-based fluid Offers a low acute oral toxicity, reducing contamination hazards compared to methanol alternatives. HVAC Pharmaceutical Secondary cooling and heating Freeze, burst protection Renewable energy Ground Source Heat Pumps (GSHP

DOWCAL™ 200

A propylene glycol-based fluid capable of operating at higher temperatures than other propylene glycol fluids.

This fluid is low in acute oral toxicity and contains a specially formulated inhibitor package that helps prevent corrosion of materials common in HVAC construction, food and beverage processing, and other systems. Propylene glycol based fluid Improved corrosion protection for aluminum alloys Suitable for use at a minimum 20% concentration for high and low temperatures Long lifetime Low acute oral toxicity Free of nitrite, borax and CMR Available in various package sizes and blends. Suitable applications include: single fluid process heating and cooling; closed-loop, water-based heating and air conditioning systems where propylene glycol-based fluids are preferred or required; and food industry applications within temperature range.

DOWCAL™ 200E

Propylene glycol-based fluid with low acute toxicity as an alternative to ethylene glycol for secondary cooling or heating in construction and industry. • Density at 20c: 1.043 • Ph of solution: 7.7-8.5 • Reserve Alkalinity min: 9.0 • Freeze point: -32

This fluid is low in acute oral toxicity and contains a specially formulated inhibitor package that helps prevent corrosion of materials common in HVAC construction, food and beverage processing, and other systems. Propylene glycol based fluid Improved corrosion protection for aluminum alloys Suitable for use at a minimum 20% concentration for high and low temperatures Long lifetime Low acute oral toxicity Free of nitrite, borax and CMR Available in various package sizes and blends. Suitable applications include: single fluid process heating and cooling; closed-loop, water-based heating and air conditioning systems where propylene glycol-based fluids are preferred or required; and food industry applications within temperature range.

DOWCAL™ N

A NSF-approved, propylene glycol-based fluid that is low in acute oral toxicity and widely used to depress freeze points in food and beverage processing and in other applications.

Dowcal™ N features a specially formulated corrosion inhibitor package and can be used for direct and indirect food additive applications. Available in various package sizes and blends. Propylene glycol based fluid Better freeze protection Better corrosion protection in hot and cold systems FDA-approved safe food additive Compatible with commonly used elastomers Long fluid life and low maintenance costs Greater cost-effectiveness Low acute oral toxicity Used to depress freeze points in food and beverage processing and in other applications

DOWFROST™

Made with DOW PuraGuard™ Propylene Glycol USP/EP, a pharmaceutical grade of monopropylene glycol with specially formulated packages of food grade industrial inhibitors that help prevent corrosion.

Regular DOWFROST™ inhibited propylene glycol (PG) DOWFROST™ is comprised of about 96% PG and 4% corrosion inhibitors. All ingredients are food safe, that is to say they are classified as GRAS (generally regarded as safe) by FDA and are approved as direct food additives. DOWFROST™ is the product of choice for the food processing industry. It is undyed and has water white appearance. DOWFROST™ offers effective heat transfer over a slightly narrower temperature range than DOWTHERM™ fluids: from 0 F to 250 F. The higher minimum recommended temperature for PG based fluids is because PG has higher viscosity and is more difficult to pump at low temperature. DOWFROST™ inhibited PG can provide freeze protection down to -60 F. DOWFROST™ is offered is various concentrations and package sizes. Color: Clear Propylene glycol-based fluid Propylene glycol-based fluid (96%) Water white Made with DOW PuraGuard™ Propylene Glycol USP/EP Low toxicity - complies with FDA and USDA regulations Operating range: 0 to 250° F for heat transfer 60° F for burst protection Heating, Ventilation & Air Conditioning (HVAC) Chill water & hydronic heating loops Geothermal (ground source heat pumps) Snow melt & Turf heating systems Solar hot water heating Fire water sprinkler systems Food processing Chilling of dairy products & beverages Beer & wine (fermentation cooling) Freezing of concentrated juices, meats, poultry & fish Refrigeration Ice skating rinks Cold storage, refrigerated warehouses & supermarkets (secondary loop) Thermal Energy Storage (TES)

DOWFROST™ Geo 20

A 20% propylene glycol solution that is intended for geothermal heat pump systems.

A ready to use solution that contains specially designed corrosion inhibitors that meet ASTM D1384 corrosion protection requirements. The low glycol content provides lower viscosity and higher heat transfer efficiency. This fluid has a freezing point of 18.5°F. Recommended Use Temperature Range: -5ºC (23ºF) to 100ºC (212ºF) Typical Properties of DOWFROST GEO 20 Fluid: Composition (% by volume) Propylene Glycol – 20 Performance Additive + Water – 80 Color – Yellow to Green Specific Gravity – 1.017 - 1.027 25 / 25ºC (77 / 77 º F) pH of Solution – 9.5 - 10.5 Reserve Alkalinity (min.) – 3.5 ml Formulated for geothermal systems Intended for use in Geothermal heating and cooling systems

DOWFROST™ HD

or beverage application.

A formulation of propylene glycol and a specially designed package of industrial corrosion inhibitors. The fluid is dyed fluorescent yellow to aid in leak detection. Not approved by the USDA or FDA for food use, and is not suitable for food...

DOWFROST™ HD inhibited propylene glycol (PG) is comprised of about 94% PG and 6% corrosion inhibitors. The lower PG content in DOWROST™ HD allows for additional corrosion inhibitors including some which are not approved by FDA as direct food additives. These additional components do not compromise toxicity fluid and provide an enhanced level of corrosion protection which is unsurpassed in the industry. DOWFROST™ HD has a fluorescent yellow color and is capable of operating at higher temperatures than regular DOWFROST™: from 0 F to 325 F. DOWFROST™ HD is intended for low toxicity, non-food processing applications and provides freeze protection down to -60 F. Dowfrost™ HD is offered is various concentrations and package sizes. Color: Green / Yellow Propylene glycol-based fluid Propylene glycol-based fluid (94%) Fluorescent yellow Increased concentration of inhibitors Not USDA/FDA approved industrial / commercial version of DOWFROST Operating range: 0 to 325° F for heat transfer -60° F for burst protection Heating, Ventilation & Air Conditioning (HVAC) Chill water & hydronic heating loops Geothermal (ground source heat pumps) Snow melt & Turf heating systems Solar hot water heating Fire water sprinkler systems Refrigeration Ice skating rinks Cold storage, refrigerated warehouses & supermarkets (secondary loop) Thermal Energy Storage (TES)

DOWTHERM™ 4000

A formulation of ethylene glycol that features one of the highest maximum use temperature of any glycol, operating temperature ranges -60°F to 350°F. The fluid is dyed fluorescent orange to aid in leak detection.

DOWTHERM™ 4000 inhibited ethylene glycol (EG) is comprised of about 92% EG and 8% corrosion inhibitors and has a bright fluorescent orange color. The lower EG content allows for a higher concentration of corrosion inhibitors which in turn means DOWTHERM™ 4000 is capable of operating at higher temperatures than DOWTHERM™ SR1 i.e. from -20°F to 350°F. This makes DOWTHERM™ 4000 a higher end, niche type product which is also capable of providing freeze protection down to -60°F. Ethylene glycol-based fluid (92%) Fluorescent orange Increased concentration of inhibitors Efficient heat transfer Operating range: -20°F to 350°F for heat transfer 60°F for burst protection Wide-temperature range operability Heating, Ventilation & Air Conditioning (HVAC) Chill water & hydronic heating loops Geothermal (ground source heat pumps) Snow melt & Turf heating systems Solar hot water heating Fire water sprinkler systems Refrigeration Ice skating rinks Cold storage, refrigerated warehouses & supermarkets (secondary loop) Thermal Energy Storage (TES)

DOWTHERM™ A

A liquid diphenyl oxide/biphenyl blend with operating temperatures of 60°F to 750°F (15°C to 400°C) employing either liquid phase or vapor phase heating.

Eutectic mixture of two very stable compounds, biphenyl and diphenyl oxide Mixture can be handled as if it were a single compound Liquid phase or vapor phase heating Temperature: 60 to 750°F Vapor Pressure: 152.02 Specific Heat: 0.373°F Viscosity: 4.91 Density: 66.37 Freezing Point: 53.6°F Flash Point: 236°F Autoignition: 1139°F Most stable organic fluid available Highest use temperature Liquid and vapor phase Mixture of diphenyl oxide and diphenyl With low viscosity to minimize startup problems, and a freezing point of 54 F, Can be used without steam tracing in installations protected from the weather Used in production of nylon, PET fiber, PET resin, formaldehyde, vegetable oil, solar, refineries, lube stock, PAO

DOWTHERM™ G

A liquid mixture of di- and tri-aryl ethers with operating temperature ranges of -20°F to 680°F (29°C to 371°C).

One of the most thermally stable low pressure liquid phase heat transfer fluid on the market and has excellent flow characteristics at low temperatures. Temperature: 20 to 680°F Vapor Pressure: 49.12 Specific Heat: 0.363°F Viscosity: 146 Density: 70.34 Freezing Point: &lt;40°F Flash Point: 266°F Autoignition: 1083°F Mixture of di- and tri- aryl compounds Liquid phase only, pressurized above 290°C Lower pressure than DOWTHERM A Fluid Good physical properties Used in production of polystyrene, polycarbonate, heat recovery, offshore platforms, refineries

DOWTHERM™ J

An alkylated aromatic liquid with operating temperature ranges of -110°F to 600°F (-80°C to 315°C).

Offers remarkable low-temperature pumpability and thermal stability for protection against accidental overheating. Temperature: -110 to 600°F Vapor Pressure: 174.52 Specific Heat: 0.376°F Viscosity: 9.67 Density: 58.31 Freezing Point: &lt;-100°F Flash Point: 136°F Autoignition: 788°F Liquid and vapor phase Excellent low temperature properties Fluid of choice for the most demanding single fluid heating and cooling applications (batch processing) Used in production of pharmaceuticals, environmental test chambers, fiber spinning

DOWTHERM™ MX

A heat transfer fluid containing a mixture of alkylated aromatics and designed for use as an alternative to hot oils in liquid phase heat transfer systems.

DOWTHERM™ MX fluid can be used in non-pressurized systems up to temperatures of 620 °F (327 °C). Temperature: -10 to 625°F Vapor Pressure: 15.1 Specific Heat: 0.351°F Viscosity: 281.7 Density: 61.9 Freezing Point: -13°F Flash Point: 329°F Autoignition: 788°F Low vapor pressure fluid Excellent low temperature pumpability Thermal stability superior to Hot Oils 5 to 6 times more stable Designed for use in non-pressurized systems Liquid phase operation only Has a high flash point Used in LNG, Off shore Platforms, Heat recovery, Polystyrene, Polyethylene, Topping units, Asphalt, Refineries

DOWTHERM™ Q

A heat transfer fluid containing a mixture of diphenylethane and alkylated aromatics.

Compared to hot oils, it exhibits better thermal stability 35 °C to 330 °C (-30 °F to 625 °F), particularly at the upper end of hot oils use range, and significantly better low-temperature pumpability. Suitable applications include use as an alternative to hot oils in liquid phase heat transfer applications. Temperature: -30° to 625°F Vapor Pressure: 48.08 Specific Heat: 0.353°F Viscosity: 48.2 Density: 63.23 Freezing Point: -30°F Flash Point: 249°F Autoignition: 773°F Best value for moderate temperatures Better thermal stability than hot oils Better physical properties than hot oils No heat tracing to -35 °C Need pressurization above 265 °C Usesd in LNG, Off shore Platforms, Heat recovery, Polystyrene, Polyethylene, Topping units, Asphalt, Refineries

DOWTHERM™ RP

A diaryl alkyl heat transfer fluid that is intended for use in applications that require liquid phase heat transfer.

Unlike other low pressure fluids - including partially hydrogenated terphenyls and dibenzyl toluene fluids, DOWTHERM™ RP fluid degrades primarily to low molecular weight products. DOWTHERM™ RP has a Maximum bulk temperature of 350 °C (660 °F) and a maximum film temperature of 375 °C (710 °F). Temperature: 30°F to 660°F Vapor Pressure: 13.63 Specific Heat: 0.372°F Viscosity: 249 Density: 65.25 Freezing Point: &lt;-4°F Flash Point: 381°F Autoignition: 725°F Best thermal stability of any liquid phase fluid Does not form tar or high boiling degradation products Liquid phase fluid used in pressure-less or low-pressure systems Used in production of PET resin, PET film, phenol, polycarbonate, polystyrene, refineries, LNG, offshore platforms

DOWTHERM™ SR-1

A formulation of ethylene glycol and a specially designed package of industrial corrosion inhibitors with operating temperature ranges of -60°F to 250°F. The fluid is dyed fluorescent pink for leak detection purposes.

DOWTHERM™ SR1 inhibited ethylene glycol (EG) is comprised of about 95% EG and 5% corrosion inhibitors. DOWTHERM™ SR1 is the most popular EG based product within the Dow portfolio. In fact, DOWTHERM™ SR1 is the most widely recognized brand name in the industry. It offers effective heat transfer over a wide temperature range: from -20°F to 250°F and provides freeze protection down to -60°F. Color: Pink Ethylene glycol-based fluid Ethylene glycol-based fluid (95%) Fluorescent pink Efficient heat transfer Operating range: -20°F to 250°F for heat transfer 60°F for burst protection Offered in various package sizes and blends. DOWTHERM™ SR-1 25% DOWTHERM™ SR-1 30% DOWTHERM™ SR-1 35% DOWTHERM™ SR-1 40% DOWTHERM™ SR-1 45% DOWTHERM™ SR-1 50% DOWTHERM™ SR-1 60% Heating, Ventilation & Air Conditioning (HVAC) Chill water & hydronic heating loops Geothermal (ground source heat pumps) Snow melt & Turf heating systems Solar hot water heating Fire water sprinkler systems Refrigeration Ice skating rinks Cold storage, refrigerated warehouses & supermarkets (secondary loop) Thermal Energy Storage (TES)

DOWTHERM™ T

A heat transfer fluid that is a mixture of C14-C30 alkyl benzenes intended for use in applications that require liquid phase heat transfer.

For use in non-pressurized liquid phase systems with a maximum temperature of 550 °F (288 °C) and a bulk temperature of 600 °F (315 °C) Temperature: 14°F to 550°F Vapor Pressure: 2.6 Specific Heat: 0.446°F Viscosity: 252 Density: 55.81 Freezing Point: &lt;14°F Flash Point: 370°F Autoignition: 707°F Synthetic organic alternative to Hot Oils Optimum economic bulk operating temperature 288°C No steam tracing required to -10°C Liquid phase operation only Does not require pressurized expansion tank Used in Offshore, Gas processing, Textiles, Plastics processing, General CPI

Fluorinert™ FC-3283

Fluid ideal for use in single phase heat transfer applications in semiconductor manufacturing.

Liquid temperature range (-50°C to 128°C) makes it ideal for a variety of applications such as etchers, ion implanters, and testers. Composition does not fractionate or shift with time ensuring fluid loss is kept to minimum and transport properties do not change. Appearance: Clear, colorless Average Molecular Weight: 521 Boiling Point (1 atm): 128°C Pour Point: -50°C Vapor Pressure: 1.44 x 103 pascals Latent Heat of Vaporization (at normal boiling point): 78 J/g Liquid Density: 1820 kg/m3 Kinematic Viscosity: 0.75 centistokes Absolute Viscosity: 1.4 centipoise Liquid Specific Heat: 1100 J kg-1 °C-1 Liquid Thermal Conductivity : 0.066 W m-1 °C-1 Coefficient of Expansion: 0.0014 °C-1 Water Solubility: 7 ppmw Solubility in Water: <5 ppmw Ozone Depletion Potential: 0 Dielectric Strength: 43 kV, 0.1" gap Dielectric Constant: 1.89 Zero ozone depletion potential Exempt from the U.S. EPA and most State definitions of a volatile organic compound (VOC), and does not contribute to ground-level smog formation Thermal stability Chemical stability Wide liquid range Non-conductive Narrow boiling range Compatibility Ideal for a variety of applications such as etchers, ion implanters, testers, dielectric bath, heat transfer, and semiconductor cooling

Fluorinert™ FC-3284

Fluid ideal for use in single phase heat transfer applications in semiconductor manufacturing. Liquid temperature range (-50°C to 128°C).

A non-conductive fluid for use in single and two phase heat transfer fluid applications in these semiconductor manufacturing. Ideal for a variety of applications such power electronics and computer cooling. Appearance: Clear, colorless Average Molecular Weight: 299 Boiling Point (1 atm): 50°C Pour Point: -73°C Latent Heat of Vaporization (at normal boiling point): 105 J/g Liquid Density: 1710 kg/m3 Kinematic Viscosity: 0.42 centistokes Absolute Viscosity: 0.71 centipoise Liquid Specific Heat: 1100 J kg-1 °C-1 Liquid Thermal Conductivity : 0.062 W m-1 °C-1 Coefficient of Expansion: 0.0016 °C-1 Water Solubility: 14 ppmw Solubility in Water: <5 ppmw Ozone Depletion Potential: 0 Dielectric Strength: 40 kV, 0.1" gap Dielectric Constant: 1.86 Thermal stability Chemical stability Wide liquid range Non-conductive Narrow boiling range Non-flammable Residue free Ideal for a variety of applications such as dielectric bath, heat transfer, and power electronic cooling

Fluorinert™ FC-40

Used in nondestructive leak and thermal shock testing for military electronics according to mil spec 883.

A colorless, thermally stable, fully fluorinated liquid. It's wide liquid range (-57°C to 165°C) make it ideal for a wide variety of applications. The FC-40 liquid is primarily a single compound, so its composition will not shift or fractionate over time. This results in less fluid loss and insures that transport properties do not change with time. Appearance: Clear, colorless Average Molecular Weight: 650 Boiling Point (1 atm): 165°C Pour Point: -57°C Latent Heat of Vaporization (at normal boiling point): 69 J/g Liquid Density: 1855 kg/m3 Kinematic Viscosity: 2.2 centistokes Absolute Viscosity: 4.1 centipoise Liquid Specific Heat: 1100 J kg-1 °C-1 Liquid Thermal Conductivity : 0.062 W m-1 °C-1 Coefficient of Expansion: 0.0012 °C-1 Water Solubility: <7 ppmw Solubility in Water: <5 ppmw Ozone Depletion Potential: 0 Dielectric Strength: 46 kV, 0.1" gap Dielectric Constant: 1.9 Compatible with most metals, plastics and elastomers. Non-conductive Narrow boiling range Wide liquid range Thermal stability Chemical stability Ideal for a variety of single phase heat transfer applications in the semiconductor manufacturing industry such as etchers, ion implanters and testers.

Fluorinert™ FC-43

A clear, colorless, non-conductive, non-flammable, residue free, thermally and chemically stable liquid ideal for use in many heat transfer fluid applications.

Is thermally and chemically stable, compatible with sensitive materials, nonflammable, practically nontoxic and leaves essentially no residue upon evaporation. This unique combination of properties makes this product ideal for many electronics applications, including many electronic quality and reliability tests. With boiling point of 174 C, commonly used as for burin-in testing, environmental stress screening and vapor phase soldering. Conforms to Mil Spec 883. Appearance: Clear, colorless Average Molecular Weight: 670 Boiling Point (1 atm): 174°C Pour Point: -50°C Estimated Critical Temperature: 567 K Estimated Critical Pressure: 1.13 x 106 pascals Vapor Pressure: 192 pascals Latent Heat of Vaporization (at normal boiling point): 70 J/g Liquid Density: 1860 kg/m3 Kinematic Viscosity: 2.5 centistokes Absolute Viscosity: 4.7 centipoise Liquid Specific Heat: 1100 J kg-1 °C-1 Liquid Thermal Conductivity: 0.065 W m-1 °C-1 Coefficient of Expansion: 0.0012 °C-1 Refractive Index: 1.291 Water Solubility: 7 ppmw Solubility in Water: <5 ppmw Ozone Depletion Potential: 0 Thermal stability Chemical stability Wide liquid range Non-conductive Narrow boiling range Compatibility Used in heat transfer fluid applications, especially in the electronics and semiconductor industry for testers, CVD and TFT manufacturing.

Fluorinert™ FC-70

A non-conductive, thermally and chemically stable liquid that offers a high boiling point (215°C).

A clear, colorless, fully-fluorinated liquid that is thermally and chemically stable, compatible with sensitive materials, nonflammable, practically nontoxic and leaves essentially no residue upon evaporation. Appearance: Clear, colorless Average Molecular Weight: 820 Boiling Point (1 atm): 215°C Pour Point: -25°C Estimated Critical Temperature: 608 K Estimated Critical Pressure: 1.03 x 106 pascals Vapor Pressure: 15 pascals Latent Heat of Vaporization (at normal boiling point): 69 J/g Liquid Density: 1940 kg/m3 Kinematic Viscosity: 12 centistokes Absolute Viscosity: 24 centipoise Liquid Specific Heat: 1100 J kg-1 °C-1 Liquid Thermal Conductivity: 0.070 W m-1 °C-1 Coefficient of Expansion: 0.0010 °C-1 Surface Tension: 18 dynes/cm Refractive Index: 1.303 Water Solubility: 8 ppmw Solubility in Water: <5 ppmw Ozone Depletion Potential: 0 Thermal stability Chemical stability Wide liquid range Non-conductive Narrow boiling range Compatibility Used for Vapor Phase Soldering of Pb/Sn eutectic solders typical in military applications. Also used in reliability testing per mil spec 883

Fluorinert™ FC-72

A clear, colorless, fully-fluorinated liquid that is thermally and chemically stable, compatible with sensitive materials, nonflammable, practically nontoxic and leaves essentially no residue upon evaporation.

Ideal for many electronics applications, including quality and reliability testing. Like other Fluorinert™ electronic liquids, FC-72 is thermally and chemically stable, compatible with sensitive materials, nonflammable, practically nontoxic and leaves essentially no residue upon evaporation. Fluorinert™ liquid FC-72 conforms to Military Specification 883 as a detector fluid in a vacuum/pressure vessel used in gross leak testing. Appearance: Clear, colorless Average Molecular Weight: 338 Boiling Point (1 atm): 56°C Pour Point: -90°C Estimated Critical Temperature: 449 K Estimated Critical Pressure: 1.83 x 106 pascals Vapor Pressure: 30.9 x 103 pascals Latent Heat of Vaporization (at normal boiling point): 88 J/g Liquid Density: 1680 kg/m3 Kinematic Viscosity: 0.38 centistokes Absolute Viscosity: 0.64 centipoise Liquid Specific Heat: 1100 J kg-1 C-1 Liquid Thermal Conductivity: 0.057 W m-1 °C-1 Coefficient of Expansion: 0.00156 °C-1 Surface Tension: 10 dynes/cm Refractive Index: 1.251 Water Solubility: 10 ppmw Solubility in Water: <5ppmw Ozone Depletion Potential: 0 Thermal stability Chemical stability Wide liquid range Non-conductive Narrow boiling range Compatibility Detector fluid in a vacuum/pressure vessel used in gross leak testing Quality and reliability testing in electronics Heat transfer applications, in testing, power electronics and other electronic applications

Fluorinert™ FC-770

A wide temperature wide (-125°C - 95°C) fluid that is used in many low temperature heat transfer applications.

Heat transfer fluid with key properties including Inertness, high dielectric strength and electrical resistivity. Typically used in single or dual-phase direct contact systems in electronics. Applications include, high voltage transformers, power electronics, dry etchers, CVD machines and cooling Ion implanters. Appearance: Clear, colorless Average Molecular Weight: 339 Boiling Point (1 atm): 95°C Pour Point: -127°C Calculated Critical Temperature: 511 K Latent Heat of Vaporization (at normal boiling point): 85.9 J/g Liquid Density: 1793 kg/m3 Kinematic Viscosity: 0.79 centistokes Absolute Viscosity: 1.359 centipoise Coefficient of Expansion: 0.00148 °C-1 Surface Tension: 10 dynes/cm Refractive Index: 1.27 Water Solubility: 14 ppmw Solubility in Water: 1.3 ppmw Thermal stability Chemical stability Wide liquid range Non-conductive Narrow boiling range Compatibility Cooling ion implanters, dry etchers and CVD machines Thermal shock and test equipment Direct contact single and two-phase coolant in certain supercomputers and sensitive military electronics

Novec™ 7000

A non-flammable, low global warming potential (GWP) heat transfer fluid capable of reaching -120°C.

Novec™ 7000 is beneficial as a heat transfer fluid for cooling reactors in the chemical processing and pharmaceutical industries. In the semiconductor industry, it is useful for automated test equipment (ATE) and wafer processing equipment. Novec™ 7000's unique properties make it useful for low temperature applications without sacrificing performance. Appearance: Clear, colorless Molecular Weight: 200 Boiling Point (1 atm): 34°C Freeze Point: -122.5°C Liquid Density (kg/m3): 1400 Kinematic Viscosity (cSt): 0.32 Kinematic Viscosity @ -80°C (cSt): 2.0 Kinematic Viscosity @ -120°C (cSt): 17 Coefficient of Expansion: 0.00219K-1 Critical Density (kg/m3): 553 Critical Pressure (MPa): 2.48 Critical Temperature: 165°C Dielectric Constant: 7.4 Dielectric Strength (kV): ~40 Flash Point: None Latent Heat of Vaporization (kJ/kg): 142 Solubility of water in fluid (ppmw): ~60 Solubility of air in fluid (vol %): ~35 Vapor Pressure (kPa): 64.6 Volume Resistivity (ohm-cm): 108 Low global warming potential Excellent dielectric properties Non-ozone depleting Low toxicity Non-flammable Non-corrosive Good thermal stability Useful at extreme low temperatures (to -120 Degree C) Will not damage electronic equipment in event of leakage or other equipment failure Semiconductor Ion implanters Dry etchers CVD/PVD tools Electronic Automated Test Equipment (ATE) Industrial/Pharmaceutical Chemical reactors Freeze dryers VOC capture Fuel cells Electronics Reliability testing Temperature calibration Electronic Cooling Supercomputers Sensitive military electronics High voltage transformers Autocascade refrigeration HCFC-123 replacement Medical Lab Histobath working fluid

Novec™ 7100

A clear, colorless and low-odor fluid intended to replace ozone-depleting substances (ODSs) and compounds with high global warming potential (GWP) in many applications.

Used in a broad range of industries/applications due to its multiple unique properties such as being clear, colorless, low odor, non-flammable, and advantageous boiling temperature. &nbsp;Intended to replace ozone-depleting substances (ODSs) and compounds with high global warming potential (GWP). &nbsp;Applications include lubricant carrier, drying agent, contact cleaner, and heat transfer fluid among others. Is a methoxy-nonafluorobutane. (b.p. 61C) Appearance: Clear, colorless Boiling Point : 61°C Freeze Point: -122.5°C Density: 1.51g/cm3 Dielectric Strength range: >25 (0.1” gap, kV) Pour Point: 135°C Molecular Weight: 250 Surface Tension (dynes/cm): 13.6 Solubility of water in water (ppmw): 12 Solubility of water in solvent (ppmw): 95 Vapor Pressure (mmHg): 202 Ozone Depletion Potential – ODP1: 0.00 Global Warming Potential: 320 Atmospheric Lifetime (years): 4.1 Flash Point: None Flammability Range in Air: None Exposure Guidelines (8 hr. time weighted average): 750 Exposure Ceiling (ppm): None Non-flammable Non-conductive Compatible with plastics Low toxicity Low Global Warming Potential (GWP) Zero ozone depletion potential VOC-exempt solvent (US EPA) Low surface tension penetrates tight spaces for improved cleaning Deposition Solvent Document Preservation Heat Transfer Organic Rankine Cycle Oxygen System Cleaning Precision Cleaning Preservation for Biological Specimens

Novec™ 7300

A low toxicity, non-ozone depleting fluid used in heat transfer, lubricant deposition, electronic testing and cleaning applications.

Designed for use in a wide variety of situations, including heat transfer, lubricant deposition, electronic testing and cleaning applications. Is a segregated hydrofluoroether. Boiling Point: 98°C Freeze Point: -38°C Liquid Density (g/ml): 1.66 Surface Tension (dynes/cm): 15 Vapor Pressure (mmHg): 44.9 Viscosity (cSt): 0.71 Ozone Depletion Potential: 0 Global Warming Potential: 200 Non-flammable Zero Ozone Depletion Potential (ODP) Low toxicity Excellent materials compatibility Low Global Warming Potential (GWP) VOC-exempt solvent (US EPA) Clear, colorless, odorless fluid Heat transfer Lubricant deposition Electronic testing Cleaning applications.

Novec™ 7500

A nonflammable fluid for use in heat transfer applications. Novec™ 7500 fluid is an ideal alternative to commonly used fluids in pharmaceutical and chemical manufacturing processes, such as freeze drying and reactor cooling.

Designed for heat transfer applications for use in cooling of ion implanters, CVD machines or other electronic applications. Also is a non-flammable fluid with a very low global warming potential (GWP.) This product's excellent inert and dielectric properties make it a viable replacement for higher GWP fluids such as PFCs and PFPEs in a wide variety of applications like microemulsion formulations and slow-evaporation coating diluent. Boiling Point @ 1 atm: 128 °C Pour Point: -100°C Molecular Weight: 414 Liquid Density (kg/m3): 1614 Coefficient of Expansion: 0.00129 K-1 Latent Heat of Vaporization @ 1 atm. (kJ/kg): 88.5 Surface Tension (dynes/cm): 16.2 Viscosity (cSt): 0.77 Critical Temperature: 261°C Critical Pressure (Mpa): 1.55 Solubility of Fluid in Water: <3 ppm by weight Dielectric Strength: 35 kV, 0.1" gap Volume Resistivity: 2.2x108 ohm-cm Dielectric Constant: 5.8 Flammability: Nonflammable Ozone Depletion Potential: 0.0 Global Warming Potential:90 Atmospheric Lifetime (years): 2.2 Volatile Organic Compound (VOC): No Wide range of thermal management applications Wide liquid range Non-flammable Non-conductive Compatible with plastics Low toxicity Low Global Warming Potential (GWP) Zero ozone depletion potential VOC-exempt solvent (US EPA) Cooling of ion implanters, dry etchers and CVD machines in semiconductor and flat panel display manufacturing facilities Cool semiconductor thermal shock and test equipment Freeze drying Reactor Cooling

Novec™ 7700

A non-flammable fluid with a low global warming potential for use in heat transfer applications.

Designed for heat transfer applications for use in cooling of ion implanters, CVD machines or other electronic applications. Also is non-flammable fluid with a very low global warming potential (GWP.) This product's excellent inert and dielectric properties make it a viable replacement for higher GWP fluids such as PFCs and PFPEs in a wide variety of applications like microemulsion formulations and slow-evaporation coating diluent. Boiling Point @ 1 atm: 167°C (333°F) Pour Point: -50°C (-58°F) Molecular Weight: 528 Liquid Density: 1797 kg/m3 Coefficient of Expansion: 0.00111 K-1 Latent Heat of Vaporization @ 1 atm: 83.4 kJ/kg Vapor Pressure: <0.1 kPa Surface Tension: 18 dynes/cm Viscosity: 2.5 cSt Critical Temperature: 290°C (554°F) Critical Pressure: 1.41 MPa Solubility of Fluid in Water: <1 ppb by weight Dielectric Strength: 35 kV, 0.1" gap Volume Resistivity: 5 × 1011 ohm-cm Dielectric Constant: 6.7 Flammability: Nonflammable GWP: 420 Ozone Depletion Potential: 0.0 Global Warming Potential: 420 Atmospheric Lifetime (years): 5.6 Volatile Organic Compound (VOC): No Wide range of thermal management applications Wide liquid range Non-flammable Non-conductive Compatible with plastics Low toxicity Low Global Warming Potential (GWP) Cooling of Ion implanters, dry etchers and CVD machines in semiconductor and flat panel display manufacturing facilities Cool semiconductor thermal shock and test equipment Direct contact cooling of supercomputers and sensitive milatry electronics Cooling of high voltages transformers and power electronics Freeze drying and reactor cooling in pharmaceutical and chemical manufacturing processes

SYLTHERM™ 800

A polydimethylsiloxane liquid with operating temperature ranges of -40°F to 750°F (-40°C to 400°C).

Highly stable, long-lasting silicone fluid designed for high temperature liquid phase operations. Temperature: -40 to 750 °F (-40°C to 400°C) Vapor Pressure: 197.32 (91.84°C) Specific Heat: 0.360 °F (-17.57°C) Viscosity: 51.0 Density: 61.9 Freezing Point: < -40 °F (-40°C) Flash Point: 320 °F (160°C) Autoignition: 725 °F (385°C) Fluid life > 10 years at 400 °C Low toxicity No odor Non-fouling Very low in acute oral toxicity Used in NDC, Lube Oil Recycling, Heat Recovery, Polymer Processing, Carbon Fiber

SYLTHERM™ HF

A polydimethylsiloxane liquid used from -40°C to 260°C.

Specially formulated, high performance silicone polymer designed for use as a low temperature, liquid phase heat transfer medium. Temperature: -100 to 500 °F (-73.3°C to 260°C) Vapor Pressure: 39.6 Specific Heat: 0.347 °F (-17.5°C) Viscosity: 16.65 Density: 60.31 Freezing Point: <-115 °F (-81.6°C) Flash Point: 145 °F (62.7°C) Autoignition: 671 °F (355°C) Non-toxic with regard to acute oral ingestion Has a closed cup flash point > 62 °C Electrical classifications Used in pharmaceutical applications, Single fluid heating and cooling, Environmental test chambers

SYLTHERM™ XLT

A polydimethylsiloxane liquid used from -100°C to 260 °C

Specifically formulated, high performance silicone polymer designed for use as a low temperature, liquid phase heat transfer medium. It offers remarkable low temperature heat transfer and pumpability, plus thermal stability. Temperature: -100 to 500 °F (-73.3°C) Vapor Pressure: 75.46 Specific Heat: 0.078 °F (-17.7°C) Viscosity: 90.17 Density: 59.3 Freezing Point: -158 °F (-105.5°C) Flash Point: 116 °F (46.6°C) Autoignition: 662 °F (350°C) Non toxic with regard to acute oral ingestion Physical properties allow it to be used in place of chlorinated solvents as a secondary coolant Used in pharmaceutical applications, Single fluid heating and cooling, Environmental test chambers

UCARTHERM™ HTF PM 6141

A formulation of ethylene glycol and specifically designed inhibitor packages with operating temperature ranges of -60°F to 250°F.

Manufactured with 100% virgin ethylene glycol and specifically formulated with heavy-duty industrial inhibitor packages that prevent corrosion, these fluids are widely used for closed-loop, process heating and process cooling. The inhibitors are easily maintained, long lasting and replenishable, which means intervals between fluid change-outs are extended and fluid expense is minimized. Ethylene glycol-based fluid Wide temperature range operability HVAC; Oil & Gas; Immersion freezing; Process cooling; Process heating; Solar heating; Radiant Heating; Thermal Energy Storage; Geothermal; Snow Melt Systems; Fermentation Cooling

UCON™ 50-HB-280-XY23

UCON™ lubricant LB-650-XY23 is a water insoluble butanol-propylene oxide polymer based product specially formulated with additives for iron and copper corrosion protection and high temperature use.

UCON™ Lubricant LB-650-XY23 is readily biodegradable, water-soluble, and exhibits low volatility. Designed for processes that require corrosion protection for copper and iron materials and in processes that require high-temperature stability of the lubricant. Color: Red to brown Odor: Mild Boiling point (760 mmHg): > 200 °C Flash point: closed cup 238 °C Relative Density (water = 1): 1.043 at 20 °C Pour point: < -34 °C Water soluble Low volatility Does not evaporate easily at room temperature Used in processes that require corrosion protection for copper and iron materials and in processes that require high-temperature stability. Intended for use in open bath systems.

UCON™ HTF 500

Formulated for high-temperature, liquid-phase heat transfer in systems requiring bulk temperatures up to 500°F.

UCON™ HTF 500 is compatible with most common metals, including all steels, iron, aluminum, copper and copper alloys and is noncorrosive. UCON™ HTF 500 has been used in many high temperature applications and is often recommended by heating equipment manufactures. Viscosity at 100°F: 62 Specific gravity: 1.038 Pour Point: -55 Boiling Point: None- nonvolatile liquid Flashpoint (ASTM D92): 575 Fire Point (ASTM D92): 600 Viscosity Index: 200 High heat transfer efficiency Water soluble Fantastic materials compatibility Long lasting Lower maintenance costs High flash point High fire point Easy to use with conventional equipment Chemical processing Laminating and calendaring rolls Dies and molds in the rubber and plastics industry Drying rolls and ovens Die-cast zinc and aluminum alloys Intended for use in closed circulating systems.

WATER-GLO® 801

For use in water and water/glycol based systems. Flouresces blue when scanned with a high intensity Spectroline leak detection lamp.

WATER-GLO® 802

For use in water and water/glycol based systems. Flouresces green when scanned with a high intensity Spectroline leak detection lamp.